Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Tools for the Workshop

Tools for the Workshop The Moore and Wright MultiMike is an adjustable micrometer with a capacity of 0 to 05 in. equipped with a set of 13 anvils which allow measurements to be made in many types of slot and cavity normally inaccessible to the micrometer. It can also be used to measure the wall thickness of tubing, eccentricity of bushes and for the location of flats and radii when profiling. The price of the instrument, complete, as shown in FIG. 1, is 7 5s. from the marketers, E. H. Jones Machine Tools Ltd., The Hyde, London, N.W.9. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

Tools for the Workshop

Aircraft Engineering and Aerospace Technology , Volume 19 (1): 3 – Jan 1, 1947
Download PDF
2 pages

Loading next page...
 
/lp/emerald-publishing/tools-for-the-workshop-4tmMC5YsxK

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb031463
Publisher site
See Article on Publisher Site

Abstract

The Moore and Wright MultiMike is an adjustable micrometer with a capacity of 0 to 05 in. equipped with a set of 13 anvils which allow measurements to be made in many types of slot and cavity normally inaccessible to the micrometer. It can also be used to measure the wall thickness of tubing, eccentricity of bushes and for the location of flats and radii when profiling. The price of the instrument, complete, as shown in FIG. 1, is 7 5s. from the marketers, E. H. Jones Machine Tools Ltd., The Hyde, London, N.W.9.

Journal

Aircraft Engineering and Aerospace Technology – Emerald Publishing

Published: Jan 1, 1947

There are no references for this article.