Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You and Your Team.

Learn More →

The Strength of Valves at Closing

The Strength of Valves at Closing THE speed at which a valve is coming to rest on its scat at the moment of closing is one of the factors deciding the amount of gases passed through the valve. The inertia forces, however, act for a very short time on the valve at this moment, and this is the reason why normal considerations in the strength of valves are not accurate it would be better, when designing the valve, to use approximate calculations giving the possibility of orientation among the various factors coming into consideration, than to leave all this to experimental practice. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

The Strength of Valves at Closing

Aircraft Engineering and Aerospace Technology , Volume 16 (11): 7 – Nov 1, 1944

Loading next page...
 
/lp/emerald-publishing/the-strength-of-valves-at-closing-DCv31NoE5x
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb031188
Publisher site
See Article on Publisher Site

Abstract

THE speed at which a valve is coming to rest on its scat at the moment of closing is one of the factors deciding the amount of gases passed through the valve. The inertia forces, however, act for a very short time on the valve at this moment, and this is the reason why normal considerations in the strength of valves are not accurate it would be better, when designing the valve, to use approximate calculations giving the possibility of orientation among the various factors coming into consideration, than to leave all this to experimental practice.

Journal

Aircraft Engineering and Aerospace TechnologyEmerald Publishing

Published: Nov 1, 1944

There are no references for this article.