Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

The Design of Redundant Structures for Minimum Weight

The Design of Redundant Structures for Minimum Weight THE procedure usually adopted for the design of a redundant structure is to assume some initial distribution of material and then to stress this by strain energy methods. From the knowledge of the load distribution thus acquired a second structure is designed and stressed and the process is repeated, if necessary, until a reasonably uniform stress is obtained. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

The Design of Redundant Structures for Minimum Weight

Aircraft Engineering and Aerospace Technology , Volume 21 (5): 2 – May 1, 1949

Loading next page...
 
/lp/emerald-publishing/the-design-of-redundant-structures-for-minimum-weight-X88kRvu8ET
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb031765
Publisher site
See Article on Publisher Site

Abstract

THE procedure usually adopted for the design of a redundant structure is to assume some initial distribution of material and then to stress this by strain energy methods. From the knowledge of the load distribution thus acquired a second structure is designed and stressed and the process is repeated, if necessary, until a reasonably uniform stress is obtained.

Journal

Aircraft Engineering and Aerospace TechnologyEmerald Publishing

Published: May 1, 1949

There are no references for this article.