Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Special review: Mechanical investigation on failure modes of reticular porous metal foams under different loadings in engineering applications

Special review: Mechanical investigation on failure modes of reticular porous metal foams under... The purpose of this paper is to provide a summarization and review of the present author's main investigations on failure modes of reticular metal foams under different loadings in engineering applications.Design/methodology/approachWith the octahedral structure model proposed by the present authors themselves, the fundamentally mechanical relations have been systematically studied for reticular metal foams with open cells in their previous works. On this basis, such model theory is continually used to investigate the failure mode of this kind of porous materials under compression, bending, torsion and shearing, which are common loading forms in engineering applications.FindingsThe pore-strut of metal foams under different compressive loadings will fail in the tensile breaking mode when it is brittle. While it is ductile, it will tend to the shearing failure mode when the shearing strength is half or nearly half of the tensile strength for the corresponding dense material and to the tensile breaking mode when the shearing strength is higher than half of the tensile strength to a certain value. The failure modes of such porous materials under bending, torsional and shearing loads are also similarly related to their material species.Originality/valueThis paper presents a distinctive method to conveniently analyze and estimate the failure mode of metal foams under different loadings in engineering applications. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png 2nd Multidiscipline Modeling in Materials and Structures Emerald Publishing

Special review: Mechanical investigation on failure modes of reticular porous metal foams under different loadings in engineering applications

Download PDF
27 pages

Loading next page...
 
/lp/emerald-publishing/special-review-mechanical-investigation-on-failure-modes-of-reticular-W7prUMLlHo
Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
1573-6105
DOI
10.1108/mmms-11-2020-0279
Publisher site
See Article on Publisher Site

Abstract

The purpose of this paper is to provide a summarization and review of the present author's main investigations on failure modes of reticular metal foams under different loadings in engineering applications.Design/methodology/approachWith the octahedral structure model proposed by the present authors themselves, the fundamentally mechanical relations have been systematically studied for reticular metal foams with open cells in their previous works. On this basis, such model theory is continually used to investigate the failure mode of this kind of porous materials under compression, bending, torsion and shearing, which are common loading forms in engineering applications.FindingsThe pore-strut of metal foams under different compressive loadings will fail in the tensile breaking mode when it is brittle. While it is ductile, it will tend to the shearing failure mode when the shearing strength is half or nearly half of the tensile strength for the corresponding dense material and to the tensile breaking mode when the shearing strength is higher than half of the tensile strength to a certain value. The failure modes of such porous materials under bending, torsional and shearing loads are also similarly related to their material species.Originality/valueThis paper presents a distinctive method to conveniently analyze and estimate the failure mode of metal foams under different loadings in engineering applications.

Journal

2nd Multidiscipline Modeling in Materials and Structures – Emerald Publishing

Published: Jun 7, 2021

Keywords: Porous material; Metal foam; Mechanical property; Failure mode

References

  • Tensile properties of open-cell nickel foams
    Aly, M.S.
  • Fracture of open-cell nickel foams under quasi-static tensile loading
    Aly, M.S.
  • Solid state porous metal production: a review of the capabilities, characteristics, and challenges
    Atwater, M.A.; Guevara, L.N.; Darling, K.A.; Tschopp, M.A.
  • Heat propagation in computer designed and real metal foam structures
    August, A.; Matz, A.M.; Nestler, B.; Jost, N.
  • Flow characteristics of bladeless impeller made of open cell porous material
    Benedik, G.; Sirok, B.; Rihtarsic, J.; Hocevar, M.
  • Theory of buckling of a porous slab and its thermoelastic analogy
    Biot, M.A.
  • Influence of processing on surface morphology and specific surface area for the nickel foam made by electrodeposition
    Chen, B.; Liu, P.S.; Chen, J.H.
  • Preparation and characterization of iron matrix syntactic foams with glass microspheres via powder metallurgy
    Cho, Y.J.; Lee, T.S.; Lee, W.; Lee, Y.C.; Park, Y.H.
  • Plasticity and damage analysis of metal foams under dynamic loading
    da Cunda, L.A.B.; Oliveira, B.F.; Creus, G.J.
  • Exact analysis solutions for the local and global buckling of sandwich beam-columns under various loadings
    Douville, M.A.; Grognec, P.L.
  • Compressive properties of open-cell Fe-Ni foams
    Huang, X.L.; Wu, G.H.; Zhang, Q.; Dou, Z.Y.; Chen, S.
  • Effects of scandium additions on mechanical properties of cellular Al-based foams
    Huang, L.; Wang, H.; Yang, D.H.; Ye, F.; Lu, Z.P.
  • Global and local buckling of sandwich circular and beam-rectangular plates with metal foam core
    Jasion, P.; Magnucka-blandi, E.; Szyc, W.; Magnucki, K.
  • Microstructural characterisation and experimental determination of a multiaxial yield surface for open-cell aluminium foams
    Jung, A.; Diebels, S.
  • Deformation behavior of open-cell stainless steel foams
    Kaya, A.C.; Fleck, C.
  • Free vibration and elasticbuckling of functionally graded porous beams reinforced by grapheme platelets
    Kitipomchai, S.; Chen, D.; Yang, J.
  • Mechanical properties of cross-connected microchannel porous Mesh Plate
    Li, D.L.; He, Z.S.; Tang, Y.
  • The tensile strength of porous metals with high porosity
    Liu, P.S.
  • Tensile fracture behavior of foamed metallic materials properties
    Liu, P.S.
  • Effect of preparation conditions on relative elongation of nickel foam
    Liu, P.S.
  • Application of different theories to foamed metals under biaxial equal-stress tension
    Liu, P.S.
  • Mechanical behaviors of porous metals under biaxial tensile loads
    Liu, P.S.
  • Mechanical relation for porous metal foams under complex loads of triaxial tension and compression
    Liu, P.S.
  • Failure mode of isotropic three-dimensional reticulated porous materials under various compressive loads
    Liu, P.S.
  • Mechanical relations for porous metal foams under several typical loads of shearing, torsion and bending
    Liu, P.S.
  • Failure by buckling mode of the pore-strut for isotropic three-dimensional reticulated porous metal foams under different compressive loads
    Liu, P.S.
  • Mechanical relation of foamed metals under uniaxial and biaxial loads of collective tension and compression
    Liu, P.S.; Chen, G.F.
  • Modeling failure modes of isotropic three-dimensional reticulated porous metal foams under several typical loads
    Liu, P.S.; Du, H.Y.
  • Investigation on fatigue property of three-dimensional reticulated porous metal foams
    Liu, P.S.; Du, H.Y.
  • Property relations based on the octahedral structure model with body-centered cubic mode for porous metal foams
    Liu, P.S.; Ma, X.M.
  • Relationship between elongation and porosity for high porosity metals
    Liu, P.S.; Fu, C.; Li, T.F.
  • Relationship between electrical resistivity and porosity for porous materials
    Liu, P.S.; Li, T.F.; Fu, C.
  • Relationship between tensile strength and preparation conditions for nickel foam
    Liu, P.S.; Liang, K.M.; Tu, S.W.
  • The exponential item in formulas for calculating tensile strength of porous metal
    Liu, P.S.; Liang, K.M.; Gu, S.R.; Wang, X.S.
  • Relationship between tensile strength and porosity for foamed metals under equal speed biaxial tension
    Liu, P.S.; Wang, X.S.; Luo, H.Y.
  • Mechanical model of porous metal foams under multiaxial tensile loads
    Liu, P.S.; Chen, G.F.; Chen, Y.M.
  • Investigation on young's modulus and Poisson ratio of foamed metals
    Liu, P.S.; Chen, G.F.; Duan, C.Y.
  • Elastic buckling of a porous beam
    Magnucki, K.; Stasiewicz, P.
  • Nonlinear vibration and buckling of functionally graded porous nanoscaled beams
    Mirjavadi, S.S.; Afshari, B.M.; Khezel, M.; Shafiei, N.; Rabby, S.; Kordnejad, M.
  • Compression behavior of Ti foams with spherical and polyhedral pores
    Palka, K.; Adamek, G.; Jakubowicz, J.
  • Effect of the solid phase diffusion on the mechanical properties of open-cell Fe-Ni alloy foams
    Pang, Q.; Wu, G.H.; Xiu, Z.Y.; Sun, D.L.
  • Deformation and failure behaviour of open cell Al foams under quasistatic and impact loading
    Schueler, P.; Fischer, S.F.; Buehrig-Polaczek, A.; Fleck, C.
  • Foaming process and properties of 6063 Aluminum foams by melt foaming method
    Shi, T.; Chen, X.; Cheng, Y.; Li, Y.X.
  • Effects of cell parameters at low strain rates on the mechanical properties of metallic foams of Al and 7075-T6 alloy processed by pressurized infiltration casting method
    Soni, B.; Biswas, S.
  • Nonlinear mechanical behavior of gradient porous beam
    Sun, H.D.; Ma, L.S.
  • Experimental study on the tensile strength of a sintered porous metal composite
    Tang, Y.; Zhou, R.; Li, H.; Yuan, W.; Lu, L.S.
  • Mechanical model for failure modes of rock and soil under compression
    Tang, L.S.; Sang, H.T.; Song, J.; Luo, Z.G.; Sun, Y.L.
  • Global topology of failure surfaces of metallic foams in principal-stress space and principal-strain space studied by numerical simulations
    Wu, Y.D.; Qiao, D.; Tang, L.Q.; Xi, H.F.; Liu, Y.P.; Jiang, Z.Y.; Liu, Z.J.; Zhou, L.C.
  • High temperature compression properties of open-cell Ni-20Cr foams produced by impregnation
    Xiao, L.J.; Song, W.D.; Tang, H.P.; Zhu, Z.W.; Wang, J.Z.; Wang, H.
  • Macroscopic fracture behavior of nickel foam under tension
    Yang, Q.C.; Zhang, M.J.; Liu, P.S.
  • Electrodeposition processing of porous Cu/Ni composites and their performance
    Yang, B.L.; Li, X.G.; Ruan, Y.; Wei, B.B.
  • A semi-analytical solution for time-dependent natural convection flow with heat generation/absorption in an annulus partially filled with porous material
    Yusuf, T.S.; Jha, B.K.
  • Mechanical properties of new negative Poisson's ratio crush box with cellular structure in plateau stage
    Zhang, W.; Hou, W.B.; Hu, P.
  • Characterization of three- and four-point bending properties of porous metal fiber sintered sheet
    Zhou, W.; Wang, Q.H.; Ling, W.S.; He, L.Z.; Tang, Y.; Wu, F.; Liao, J.L.; Hui, K.S.; Hui, K.N.