Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

RobotScript™: the introduction of a universal robot programming language

RobotScript™: the introduction of a universal robot programming language The flexibility of a robot system comes from its ability to be programmed. How the robot is programmed is a main concern of all robot users. A good mechanical arm can be underutilized if it is too difficult to program. The introduction of the Universal Robot Controller™ (URC) has made the possibility of a standard, easy to use, robot programming language a reality. The URC is an open‐architecture, PC‐based robot controller. It will work with virtually any robot and gives the user increased flexibility and capabilities over the standard OEM controllers. The URC uses Windows NT as its operating system. The URC is the ideal platform for a universal robot programming language, RobotScript. It allows one robot language to run all robots in a factory. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Robot: An International Journal Emerald Publishing

RobotScript™: the introduction of a universal robot programming language

Industrial Robot: An International Journal , Volume 26 (1): 9 – Feb 1, 1999

Loading next page...
 
/lp/emerald-publishing/robotscript-the-introduction-of-a-universal-robot-programming-language-JFNt7A8OsU

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © 1999 MCB UP Ltd. All rights reserved.
ISSN
0143-991X
DOI
10.1108/01439919910250188
Publisher site
See Article on Publisher Site

Abstract

The flexibility of a robot system comes from its ability to be programmed. How the robot is programmed is a main concern of all robot users. A good mechanical arm can be underutilized if it is too difficult to program. The introduction of the Universal Robot Controller™ (URC) has made the possibility of a standard, easy to use, robot programming language a reality. The URC is an open‐architecture, PC‐based robot controller. It will work with virtually any robot and gives the user increased flexibility and capabilities over the standard OEM controllers. The URC uses Windows NT as its operating system. The URC is the ideal platform for a universal robot programming language, RobotScript. It allows one robot language to run all robots in a factory.

Journal

Industrial Robot: An International JournalEmerald Publishing

Published: Feb 1, 1999

Keywords: Control; Language; Robots

There are no references for this article.