Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Pursuing successful rapid manufacturing: a users' best‐practices approach

Pursuing successful rapid manufacturing: a users' best‐practices approach Purpose – This paper seeks to present the results of a study carried out within rapid manufacturing (RM) service providers and engineering centres in Northern Spain. By disclosing strategies for their everyday operation, it is intended to show how the internal expertise acquired overtime copes with the lack of standards within this industry. Design/methodology/approach – The study was deployed by means of a survey including four main issues: RM concepts, process planning, materials and costs. Questions range from general RM perceptions to specific production criteria like: layer thicknesses, laser power, quality assurance methods, etc. A special emphasis is made on cost parameters, since they play a major role when selecting the final manufacturing route. Findings – The so‐called “de facto standards” were found to be widely used in order to minimize production risks for RM. The study also suggests the need for specific RM standards based on key issues like material recycling, process planning and costs assignment. Practical implications – The study is mainly focused on additive RM processes used in Spanish centres. Although, some other technologies applied elsewhere might not be considered, it is assumed that most of the technologies mentioned in this study are available worldwide, thus providing valuable information to increase the general RM base of knowledge. Originality/value – Unlike most of the RM literature based on benchmarking of processes to provide information, this paper shows first hand data from users and service providers, showing RM practices and preferences from a different approach. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Rapid Prototyping Journal Emerald Publishing

Pursuing successful rapid manufacturing: a users' best‐practices approach

Loading next page...
 
/lp/emerald-publishing/pursuing-successful-rapid-manufacturing-a-users-best-practices-oItCVbfUB6
Publisher
Emerald Publishing
Copyright
Copyright © 2008 Emerald Group Publishing Limited. All rights reserved.
ISSN
1355-2546
DOI
10.1108/13552540810878049
Publisher site
See Article on Publisher Site

Abstract

Purpose – This paper seeks to present the results of a study carried out within rapid manufacturing (RM) service providers and engineering centres in Northern Spain. By disclosing strategies for their everyday operation, it is intended to show how the internal expertise acquired overtime copes with the lack of standards within this industry. Design/methodology/approach – The study was deployed by means of a survey including four main issues: RM concepts, process planning, materials and costs. Questions range from general RM perceptions to specific production criteria like: layer thicknesses, laser power, quality assurance methods, etc. A special emphasis is made on cost parameters, since they play a major role when selecting the final manufacturing route. Findings – The so‐called “de facto standards” were found to be widely used in order to minimize production risks for RM. The study also suggests the need for specific RM standards based on key issues like material recycling, process planning and costs assignment. Practical implications – The study is mainly focused on additive RM processes used in Spanish centres. Although, some other technologies applied elsewhere might not be considered, it is assumed that most of the technologies mentioned in this study are available worldwide, thus providing valuable information to increase the general RM base of knowledge. Originality/value – Unlike most of the RM literature based on benchmarking of processes to provide information, this paper shows first hand data from users and service providers, showing RM practices and preferences from a different approach.

Journal

Rapid Prototyping JournalEmerald Publishing

Published: May 30, 2008

Keywords: Rapid prototypes; Best practice; Standards; Spain

References