Get 20M+ Full-Text Papers For Less Than $1.50/day. Subscribe now for You or Your Team.

Learn More →

Preparation and evaluation of some polyesteraluminium oxide composites

Preparation and evaluation of some polyesteraluminium oxide composites Surface of aluminium oxide was modified using the adsorption of stearic acid molecules from benzene solution. The adsorption isotherm and the sedimentation properties of the aluminium oxide in the organic medium were determined. Commercial unsaturated polyester was cured to a crosslinked structure using styrene, methyl methacrylate and methyl acrylate monomers as crosslinking agents, and small amounts of peroxidic initiator to initiate the curing process. Different composite materials of polyestermodified surface aluminium oxide were prepared, and the physicomechanical properties of the prepared composites were measured for the products in the form of cast laminates and rods. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Pigment & Resin Technology Emerald Publishing

Preparation and evaluation of some polyesteraluminium oxide composites

Loading next page...
 
/lp/emerald-publishing/preparation-and-evaluation-of-some-polyesteraluminium-oxide-composites-BYYc3XEQM0

References (5)

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0369-9420
DOI
10.1108/eb042745
Publisher site
See Article on Publisher Site

Abstract

Surface of aluminium oxide was modified using the adsorption of stearic acid molecules from benzene solution. The adsorption isotherm and the sedimentation properties of the aluminium oxide in the organic medium were determined. Commercial unsaturated polyester was cured to a crosslinked structure using styrene, methyl methacrylate and methyl acrylate monomers as crosslinking agents, and small amounts of peroxidic initiator to initiate the curing process. Different composite materials of polyestermodified surface aluminium oxide were prepared, and the physicomechanical properties of the prepared composites were measured for the products in the form of cast laminates and rods.

Journal

Pigment & Resin TechnologyEmerald Publishing

Published: Jul 1, 1990

There are no references for this article.