Performance evaluation of the cell‐based algorithms for domain decomposition in flow simulation

Performance evaluation of the cell‐based algorithms for domain decomposition in flow simulation Purpose – The cell‐based method of domain decomposition was first introduced for complex 3D geometries. To further assess the method, the aim is to carry out flow simulation in rectangular ducts to compare the known analytical solutions. Design/methodology/approach – The method is not based on equal subvolumes but on equal numbers of active cells. The variables of the simulation are stored in ordered 1D arrays to replace the conventional 3D arrays, and the domain decomposition of the complex 3D problems therefore becomes 1D. Finally, the 3D results can be recovered using a coordinate matrix. Through the flow simulation in the rectangular ducts how the algorithm of the domain decompositions works was illustrated clearly, and the numerical solution was compared with the exact solutions. Findings – The cell‐based method can find the subdomain interfaces successfully. The parallelization based on the algorithm does not cause additional errors. The numerical results agree well with the exact solutions. Furthermore, the results of the parallelization show again that domains of 3D geometries can be decomposed automatically without inducing load imbalances. Practical implications – Although, the approach is illustrated with lattice Boltzmann method, it is also applicable to other numerical methods in fluid dynamics and molecular dynamics. Originality/value – Unlike the existing methods, the cell‐based method performs the load balance first based on the total number of fluid cells and then decomposes the domain into a number of groups (or subdomains). Thus, the task of the cell‐based method is to recover the interface rather than to balance the load as in the traditional methods. This work has examined the celled‐based method for the flow in rectangular ducts. The benchmark test confirms that the cell‐based domain decomposition is reliable and convenient in comparison with the well‐known exact solutions. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png International Journal of Numerical Methods for Heat & Fluid Flow Emerald Publishing

Performance evaluation of the cell‐based algorithms for domain decomposition in flow simulation

Loading next page...
 
/lp/emerald-publishing/performance-evaluation-of-the-cell-based-algorithms-for-domain-9FQk0b04Kl
Publisher
Emerald Publishing
Copyright
Copyright © 2008 Emerald Group Publishing Limited. All rights reserved.
ISSN
0961-5539
DOI
10.1108/09615530810879765
Publisher site
See Article on Publisher Site

Abstract

Purpose – The cell‐based method of domain decomposition was first introduced for complex 3D geometries. To further assess the method, the aim is to carry out flow simulation in rectangular ducts to compare the known analytical solutions. Design/methodology/approach – The method is not based on equal subvolumes but on equal numbers of active cells. The variables of the simulation are stored in ordered 1D arrays to replace the conventional 3D arrays, and the domain decomposition of the complex 3D problems therefore becomes 1D. Finally, the 3D results can be recovered using a coordinate matrix. Through the flow simulation in the rectangular ducts how the algorithm of the domain decompositions works was illustrated clearly, and the numerical solution was compared with the exact solutions. Findings – The cell‐based method can find the subdomain interfaces successfully. The parallelization based on the algorithm does not cause additional errors. The numerical results agree well with the exact solutions. Furthermore, the results of the parallelization show again that domains of 3D geometries can be decomposed automatically without inducing load imbalances. Practical implications – Although, the approach is illustrated with lattice Boltzmann method, it is also applicable to other numerical methods in fluid dynamics and molecular dynamics. Originality/value – Unlike the existing methods, the cell‐based method performs the load balance first based on the total number of fluid cells and then decomposes the domain into a number of groups (or subdomains). Thus, the task of the cell‐based method is to recover the interface rather than to balance the load as in the traditional methods. This work has examined the celled‐based method for the flow in rectangular ducts. The benchmark test confirms that the cell‐based domain decomposition is reliable and convenient in comparison with the well‐known exact solutions.

Journal

International Journal of Numerical Methods for Heat & Fluid FlowEmerald Publishing

Published: Jun 27, 2008

Keywords: Simulation; Flow; Computational geometry

References

You’re reading a free preview. Subscribe to read the entire article.


DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create folders to
organize your research

Export folders, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off