Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Oil Coolers for TORQUE CONVERTERS

Oil Coolers for TORQUE CONVERTERS The use of torque converters on road vehicles has not progressed in this country as fast as it has in the U.S.A., but it very likely will do so in the next few years. The question of providing suitable oil coolers for the torque converter oil was the subject of a paper presented last month before the Society of Automotive Engineers at Milwaukee by R. P. McDonough of the Harrison Radiator Division, General Motors Corporation. Mr. McDonough said that the oils used for this purpose usually approximate the SAE 10W grade and the maximum oil temperature to be tolerated is around 300F. The principal points given in Mr. McDonough's paper are as follows. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Lubrication and Tribology Emerald Publishing

Oil Coolers for TORQUE CONVERTERS

Industrial Lubrication and Tribology , Volume 5 (10): 4 – Oct 1, 1953

Loading next page...
 
/lp/emerald-publishing/oil-coolers-for-torque-converters-UhIadlVLZA

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0036-8792
DOI
10.1108/eb052252
Publisher site
See Article on Publisher Site

Abstract

The use of torque converters on road vehicles has not progressed in this country as fast as it has in the U.S.A., but it very likely will do so in the next few years. The question of providing suitable oil coolers for the torque converter oil was the subject of a paper presented last month before the Society of Automotive Engineers at Milwaukee by R. P. McDonough of the Harrison Radiator Division, General Motors Corporation. Mr. McDonough said that the oils used for this purpose usually approximate the SAE 10W grade and the maximum oil temperature to be tolerated is around 300F. The principal points given in Mr. McDonough's paper are as follows.

Journal

Industrial Lubrication and TribologyEmerald Publishing

Published: Oct 1, 1953

There are no references for this article.