Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Occurrence of tin pest on the surface of tin‐rich lead‐free alloys

Occurrence of tin pest on the surface of tin‐rich lead‐free alloys Purpose – The purpose of this paper is to investigate tin pest formation in lead‐free alloys. Design/methodology/approach – Samples of Sn99.5Ag3.0Cu0.5, Sn99Cu1 and Sn98Cu2 alloys were prepared in four different forms. The first group was prepared using traditional PCB technology and a hand soldering method. The next group of samples was composed of as‐received ingots of these alloys. To check the impact of mechanical treatment on the transformation process, additional cold‐worked and cold‐rolled samples were prepared (30 kN). All samples were placed initially either at −18°C or at −65°C for low temperature storage testing. Visual observations, scanning electron microscopy observations and X‐ray diffraction analysis were performed to identify the transformation process. Additional samples were prepared using a force of 75 kN and placed in a chamber at a temperature of −30°C for long‐term testing. Findings – The detectable symptoms of tin pest in samples subjected to mechanical processing with 1 and 2 wt.% of Cu addition stored at −18°C were observed at the edges of the samples after 17 months of storage. Further aging at −18°C showed the progress of α/β transformation with time under low‐temperature stress, but only in these specimens. With the application of greater force to the pressing process (75 kN instead of 30 kN) and at a temperature of storage close to the maximal transformation rate (−30°C), there was a significant acceleration of the α/β transformation, and this dependence can be used in predicting the risk of tin pest occurrence in various lead‐free alloys. Originality/value – The paper shows that the degree of mechanical processing had a great influence on the α/β transformation rate. Based on these observations, it is proposed that such mechanically processed samples can be used for accelerated testing of tin‐rich lead‐free alloys at low temperatures. Such tests would be appropriate for a practical estimation of the tin pest risk when the design life of some electronic equipment ranges from 15 to 25 years. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Soldering & Surface Mount Technology Emerald Publishing

Occurrence of tin pest on the surface of tin‐rich lead‐free alloys

Loading next page...
 
/lp/emerald-publishing/occurrence-of-tin-pest-on-the-surface-of-tin-rich-lead-free-alloys-1jHReW3Hpt

References (16)

Publisher
Emerald Publishing
Copyright
Copyright © 2011 Emerald Group Publishing Limited. All rights reserved.
ISSN
0954-0911
DOI
10.1108/09540911111146944
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this paper is to investigate tin pest formation in lead‐free alloys. Design/methodology/approach – Samples of Sn99.5Ag3.0Cu0.5, Sn99Cu1 and Sn98Cu2 alloys were prepared in four different forms. The first group was prepared using traditional PCB technology and a hand soldering method. The next group of samples was composed of as‐received ingots of these alloys. To check the impact of mechanical treatment on the transformation process, additional cold‐worked and cold‐rolled samples were prepared (30 kN). All samples were placed initially either at −18°C or at −65°C for low temperature storage testing. Visual observations, scanning electron microscopy observations and X‐ray diffraction analysis were performed to identify the transformation process. Additional samples were prepared using a force of 75 kN and placed in a chamber at a temperature of −30°C for long‐term testing. Findings – The detectable symptoms of tin pest in samples subjected to mechanical processing with 1 and 2 wt.% of Cu addition stored at −18°C were observed at the edges of the samples after 17 months of storage. Further aging at −18°C showed the progress of α/β transformation with time under low‐temperature stress, but only in these specimens. With the application of greater force to the pressing process (75 kN instead of 30 kN) and at a temperature of storage close to the maximal transformation rate (−30°C), there was a significant acceleration of the α/β transformation, and this dependence can be used in predicting the risk of tin pest occurrence in various lead‐free alloys. Originality/value – The paper shows that the degree of mechanical processing had a great influence on the α/β transformation rate. Based on these observations, it is proposed that such mechanically processed samples can be used for accelerated testing of tin‐rich lead‐free alloys at low temperatures. Such tests would be appropriate for a practical estimation of the tin pest risk when the design life of some electronic equipment ranges from 15 to 25 years.

Journal

Soldering & Surface Mount TechnologyEmerald Publishing

Published: Jun 28, 2011

Keywords: Tin; Alloys; Joint disintegration; Lead‐free; SAC; SnCu; Joining materials; Pest resistance testing

There are no references for this article.