Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

New method for investigating the dynamic pressure behavior of compression garment

New method for investigating the dynamic pressure behavior of compression garment Purpose – The paper aims to develop a system and measuring method for investigating the dynamic pressure behavior of compression garments. Design/methodology/approach – The dynamic pressure behavior measurement, realized by use of the self‐designed system, is a direct measuring method, which is based on a rigid hemisphere with five pressure sensors distributed on its surface. The dynamic pressure is measured over time under the process of fabric 3D deformation. The pressure distributions at the basic five sites are accepted as the measuring results. The dynamic stiffness index can be calculated from dynamic pressure profile and 3D deformation of compression garments. Findings – The measuring system records the pressure‐time curve and pressure‐deformation curve. The dynamic pressure stiffness index expresses the change in pressure owing to the change in elongation of compression fabrics. The pressure measuring system and the index provide much information in the field of compression garment assessment. Research limitations/implications – Another characteristic that was not mentioned but important is pressure hysteresis, which can give the information about pressure decay when fabrics undergoing repeated stretch and relaxation. The influence factors of hysteresis and its role in compression garments also requires further research. Originality/value – To determine and characterize the dynamic pressure behavior of compression garment under 3D deformation, this study develops a measuring system and defines a new index. The measuring system can be used in scientific research institutes and factories, contribute to optimize process parameters and quality control of compression garment. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png International Journal of Clothing Science and Technology Emerald Publishing

New method for investigating the dynamic pressure behavior of compression garment

Download PDF
10 pages

Loading next page...
 
/lp/emerald-publishing/new-method-for-investigating-the-dynamic-pressure-behavior-of-PUxDYQTskH
Publisher
Emerald Publishing
Copyright
Copyright © 2010 Emerald Group Publishing Limited. All rights reserved.
ISSN
0955-6222
DOI
10.1108/09556221011071839
Publisher site
See Article on Publisher Site

Abstract

Purpose – The paper aims to develop a system and measuring method for investigating the dynamic pressure behavior of compression garments. Design/methodology/approach – The dynamic pressure behavior measurement, realized by use of the self‐designed system, is a direct measuring method, which is based on a rigid hemisphere with five pressure sensors distributed on its surface. The dynamic pressure is measured over time under the process of fabric 3D deformation. The pressure distributions at the basic five sites are accepted as the measuring results. The dynamic stiffness index can be calculated from dynamic pressure profile and 3D deformation of compression garments. Findings – The measuring system records the pressure‐time curve and pressure‐deformation curve. The dynamic pressure stiffness index expresses the change in pressure owing to the change in elongation of compression fabrics. The pressure measuring system and the index provide much information in the field of compression garment assessment. Research limitations/implications – Another characteristic that was not mentioned but important is pressure hysteresis, which can give the information about pressure decay when fabrics undergoing repeated stretch and relaxation. The influence factors of hysteresis and its role in compression garments also requires further research. Originality/value – To determine and characterize the dynamic pressure behavior of compression garment under 3D deformation, this study develops a measuring system and defines a new index. The measuring system can be used in scientific research institutes and factories, contribute to optimize process parameters and quality control of compression garment.

Journal

International Journal of Clothing Science and Technology – Emerald Publishing

Published: Oct 5, 2010

Keywords: Dynamics; Pressure; Measurement; Garment industry

References

  • Pressure garment
    Dias, T.; Cooke, W.; Fernando, A.; Jayawarna, D.; Chaudhury, N.H.
  • No‐Active Medical Devices. Working Group 2 ENV 12718: European Prestandard “Medical Compression Hosiery”, CEN TC 205
    European Committee for Standardization (CEN)
  • Prediction of girdle's pressure on human body from the pressure measurement on a dummy
    Fan, J.; Chan, A.P.
  • Development of a tool to evaluate the comfort of a baseball cap from objective pressure measurement(I) – holding power and pressure distribution
    Kang, T.J.; Park, C.H.; Jun, Y.M.; Jung, J.
  • Effects of material properties and fabric structure characteristics of graduated compression stockings (GCS) on the skin pressure distributions
    Liu, R.; Kwok, Y.L.; Li, Y.; Lao, T.T.; Zhang, X.
  • Quantitative assessment of relationship between pressure performances and material mechanical properties of medical graduated compression stockings
    Liu, R.; Kwok, Y.L.; Li, Y.; Lao, T.T.; Zhang, X.
  • Evaluation of a sensor for low interface pressure applications
    Martin, F.P.; Satsue, H.; Duncan, B.
  • Comfort pressure evaluation of men's socks using an elastic optical fiber
    Nishimatsu, T.; Ohmura, K.; Sekiguchi, S.; Toba, E.J.; Shoh, K.J.
  • A method for measuring the dynamic behavior of medical compression hosiery during walking
    Stolk, R.; Wegen van der‐franken, C.P.; Neumann, H.A.
  • Design and implementation of pressure measurement system for pressure garments
    Teng, T.L.; Chou, K.T.; Lin, C.H.
  • A soft mannequin for the evaluation of pressure garments on human body
    Yu, W.N.; Fan, J.T.; Qian, X.M.; Tao, X.M.