Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/emerald-publishing/microstructure-and-wear-properties-of-aisi-1038-h-steel-weldments-SbN6sLxXU2
References (20)
-
I.M. Mulchings
Powder Tech. -
M. Dumovic
Repair and maintenance procedures for heavy machinery components -
T. Kuo, Hwa-Teng Lee (2002)
Effects of filler metal composition on joining properties of alloy 690 weldmentsMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 338
-
H. Unal, U. Şen, A. Mimaroglu (2005)
Abrasive wear behaviour of polymeric materialsMaterials & Design, 26
-
F.W. Fraser, E.A. Metzbower
Laser welding of a titanium alloys -
I. Uygur, B. Gülenç (2004)
The Effect of Shielding Gas Compositions For MIG welding process on Mechanical Behavior of Low Carbon SteelMetalurgija, 43
-
WTIA Technical Note 4
The Industry Guide to Hardsurfacing for the Control of Wear -
B. Gülenç, N. Kahraman (2003)
Wear behaviour of bulldozer rollers welded using a submerged arc welding processMaterials & Design, 24
-
J. Rawers (2005)
Wear testing of high Fe–N–C steelsWear, 258
-
Halit Doğan, F. Findik, A. Oztarhan (2004)
Tribological studies of ZrO2‐implanted on stainless steel substrateIndustrial Lubrication and Tribology, 56
-
Halit Doğan, F. Findik, A. Oztarhan (2003)
Comparative study of wear mechanism of surface treated AISI 316L stainless steelIndustrial Lubrication and Tribology, 55
-
M. Suban, J. Tušek (2001)
Dependence of melting rate in MIG/MAG welding on the type of shielding gas usedJournal of Materials Processing Technology, 119
-
M. Eroglu, M. Aksoy (2000)
Effect of initial grain size on microstructure and toughness of intercritical heat-affected zone of a low carbon steelMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 286
-
S. Lu, O. Kwon, Tae-Bum Kim, Kwon-Hu Kim (2004)
Microstructure and wear property of Fe–Mn–Cr–Mo–V alloy cladding by submerged arc weldingJournal of Materials Processing Technology, 147
-
Halit Doğan, F. Findik, Ö. Morgül (2002)
Tribological properties of coated ASME 316L SS and comparison with a substrateIndustrial Lubrication and Tribology, 54
-
I. Uygur, I. Dogan
The effect of TIG welding on microstructure and mechanical properties of a butt‐joined‐unalloyed titanium -
Halit Doğan, F. Findik, Ö. Morgül (2002)
Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrateMaterials & Design, 23
-
G. Filacchioni, R. Montanari, M. Tata, L. Pilloni (2002)
Structural and mechanical properties of welded joints of reduced activation martensitic steelsJournal of Nuclear Materials, 307
-
I. Hutchings (1993)
Mechanisms of wear in powder technology: A reviewPowder Technology, 76
-
Ill-Soo Kim, K. Son, Ying Yang, Prasad Yarlagadda (2003)
Sensitivity analysis for process parameters in GMA welding processes using a factorial design methodInternational Journal of Machine Tools & Manufacture, 43
- Publisher
- Emerald Publishing
- Copyright
- Copyright © 2006 Emerald Group Publishing Limited. All rights reserved.
- ISSN
- 0036-8792
- DOI
- 10.1108/00368790610691383
- Publisher site
- See Article on Publisher Site
Abstract
Purpose – To provide information about technical data; wear behaviour of worn rotor parts in mining industry and for the other application of ferrous alloys. Design/methodology/approach – Wear behaviour of the various filler wires were tested (tensile, hardness, and wear) and compared with each other in the light of microstructure, chemical, and mechanical properties. Findings – The results showed that the wear rates were significantly increased with the increasing load, welding current, wear distance and poor mechanical properties. A larger amount of C, Cr, and Mn specimen showed the best wear resistance since it contained a number of hard MC‐type carbides and coarse grains. Furthermore, for all materials the weight loss increases linearly with the increasing of welding arc current, load and wear distance. Research limitations/implications – It would be interesting to search about the toughness values and fatigue behaviour of these materials. It could be the good idea for future work could be concentrated fracture surface analysis of these materials. Practical implications – For these materials choosing the right chemical composition of the filler material, certain arc current and ideal microstructure is crutial for the wear response. Originality/value – The main value of this paper is to contribute and fulfil the mechanical properties of welding wires that is being studied so far in the literature such as the effects of chemical composition, applied road range, and arc current on the tensile, hardness and wear behaviours of the welding wires.
Journal
Industrial Lubrication and Tribology – Emerald Publishing
Published: Nov 1, 2006
Keywords: Wear; Hardness; Mechanical properties of materials; Gas‐shielded welding