Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/emerald-publishing/microstructure-and-corrosion-resistance-of-ni-cr3c2-nicr-composite-3FqDzFpetN
References (48)
-
K. Vathsala, T. Venkatesha (2011)
Zn–ZrO2 nanocomposite coatings: Elecrodeposition and evaluation of corrosion resistanceApplied Surface Science, 257
-
M. Surender, B. Basu, R. Balasubramaniam (2004)
Wear characterization of electrodeposited Ni–WC composite coatingsTribology International, 37
-
D. Susan, A. Marder (2002)
Oxidation of Ni–Al-Base Electrodeposited Composite Coatings. II: Oxidation Kinetics and Morphology at 1000°COxidation of Metals, 57
-
Haifeng Liu, Weixing Chen (2008)
Porosity-dependent cyclic-oxidation resistance at 850 °C of annealed Ni-Al-based coatings via electroplatingSurface & Coatings Technology, 202
-
S. Aruna, S. Diwakar, A. Jain, K. Rajam (2005)
Comparative study on the effect of current density on Ni and Ni–Al2O3 nanocomposite coatings produced by electrolytic depositionSurface Engineering, 21
-
O. Sancakoğlu, O. Çulha, M. Toparli, B. Agaday, E. Çeli̇k (2011)
Co-deposited Zn-submicron sized Al2O3 composite coatings: Production, characterization and micromechanical propertiesMaterials & Design, 32
-
A. Hovestad, L. Janssen (1995)
Electrochemical codeposition of inert particles in a metallic matrixJournal of Applied Electrochemistry, 25
-
(1997)
Electrodeposition of dispersion composite coatings based upon polymer and ceramic particles in a metal matrix -
G. Bari (2010)
ELECTRODEPOSITION OF NICKEL -
S. Bakshi, D. Lahiri, Arvind Agarwal (2010)
Carbon nanotube reinforced metal matrix composites - a reviewInternational Materials Reviews, 55
-
E. Gueler, E. Konca, I. Karakaya (2013)
Effect of Electrodeposition Parameters on the Current Density of Hydrogen Evolution Reaction in Ni and Ni-MoS2 Composite CoatingsInternational Journal of Electrochemical Science
-
Yingwu Yao, S. Yao, Lu Zhang, Hongzhi Wang (2007)
Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatingsMaterials Letters, 61
-
E. García-Lecina, I. García-Urrutia, J. Díez, J. Morgiel, P. Indyka (2012)
A comparative study of the effect of mechanical and ultrasound agitation on the properties of electrodeposited Ni/Al2O3 nanocomposite coatingsSurface & Coatings Technology, 206
-
R. Mousavi, M. Bahrololoom, F. Deflorian, L. Ecco (2016)
Improvement of corrosion resistance of Ni-Mo alloy coatings: Effect of heat treatmentApplied Surface Science, 364
-
P. Baghery, M. Farzam, A. Mousavi, M. Hosseini (2010)
Ni–TiO2 nanocomposite coating with high resistance to corrosion and wearSurface & Coatings Technology, 204
-
C. Kerr, D. Barker, F. Walsh, J. Archer (2000)
The Electrodeposition of Composite Coatings based on Metal Matrix-Included Particle DepositsTransactions of the IMF, 78
-
J. Roos, J. Celis, J. Fransaer, C. Buelens (1990)
The development of composite plating for advanced materialsJOM, 42
-
Atikur Rahman, R. Jayaganthan, S. Prakash, V. Chawla, R. Chandra (2009)
High temperature oxidation behavior of nanostructured Ni–Al coatings on superalloyJournal of Alloys and Compounds, 472
-
Xiao-qian Yang, X. Peng, Fu-Xin Wang (2008)
Effect of annealing treatment on the oxidation of an electrodeposited alumina-forming Ni-Al nanocompositeCorrosion Science, 50
-
Lei Shi, Chufeng Sun, P. Gao, Feng Zhou, Wei-min Liu (2006)
Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coatingApplied Surface Science, 252
-
Jiangong Li, Y. Sun, X. Sun, J. Qiao (2005)
Mechanical and corrosion-resistance performance of electrodeposited titania–nickel nanocomposite coatingsSurface & Coatings Technology, 192
-
F. Cai, C. Jiang, Xueyan Wu (2014)
X-ray diffraction characterization of electrodeposited Ni–Al composite coatings prepared at different current densitiesJournal of Alloys and Compounds, 604
-
N. Daemi, F. Mahboubi, H. Alimadadi (2011)
Effect of plasma nitriding on electrodeposited Ni-Al composite coatingMaterials & Design, 32
-
Y. Zhou, Xin-Yao Peng, Fu-hui Wang (2004)
Oxidation of a novel electrodeposited Ni-Al nanocomposite film at 1050 °CScripta Materialia, 50
-
F. Walsh, C. Léon (2014)
A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technologyTransactions of the IMF, 92
-
Zhiheng Zhang, Junlei Tang, Yingying Wang, Hu Wang, B. Normand, Y. Zuo (2018)
Electrodeposition of a Pd-Ni/TiO2 Composite Coating on 316L SS and Its Corrosion Behavior in Hot Sulfuric Acid SolutionTHE Coatings, 8
-
K. Helle, F. Walsh (1997)
Electrodeposition of Composite Layers Consisting of Inert Inclusions in a Metal MatrixTransactions of The Institute of Metal Finishing, 75
-
G. Meng, Yang Li, Y. Shao, Tao Zhang, Yanqiu Wang, Fuhui Wang, Xuequn Cheng, C. Dong, Xiaogang Li (2015)
Effect of Microstructures on Corrosion Behavior of Nickel Coatings: (I) Abnormal Grain Size Effect on Corrosion BehaviorJournal of Materials Science & Technology, 31
-
Yue-bo Zhou, Hai-Jun Zhang (2011)
Effect of annealing treatment on cyclic-oxidation of electrodeposited Ni-Al nanocompositeTransactions of Nonferrous Metals Society of China, 21
-
Xiao-qian Yang, X. Peng, Fu-Xin Wang (2007)
Size effect of Al particles on the structure and oxidation of Ni/Ni3Al composites transformed from electrodeposited Ni–Al filmsScripta Materialia, 56
-
P. Gyftou, E. Pavlatou, N. Spyrellis (2008)
Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC compositesApplied Surface Science, 254
-
M. Musiani (2000)
Electrodeposition of composites: an expanding subject in electrochemical materials scienceElectrochimica Acta, 45
-
R. Mousavi, M. Bahrololoom, F. Deflorian (2016)
Preparation, corrosion, and wear resistance of Ni‐Mo/Al composite coating reinforced with Al particlesMaterials & Design, 110
-
K. Hou, Han-TaoWang, Hung‐Hua Sheu, M. Ger (2014)
Preparation and wear resistance of electrodeposited Ni–W/diamond composite coatingsApplied Surface Science, 308
-
N. Wasekar, G. Sundararajan (2015)
Sliding wear behavior of electrodeposited Ni–W alloy and hard chrome coatingsWear, 342
-
S. Aruna, C. Bindu, V. Selvi, V. Grips, K. Rajam (2006)
Synthesis and properties of electrodeposited Ni/ceria nanocomposite coatingsSurface & Coatings Technology, 200
-
C. Zanella, M. Lekka, P. Bonora (2009)
Influence of the particle size on the mechanical and electrochemical behaviour of micro- and nano-nickel matrix composite coatingsJournal of Applied Electrochemistry, 39
-
L. Chang, J. Liu, R. Zhang (2011)
Corrosion behaviour of electrodeposited Ni/Al2O3 composite coating covered with a NaCl salt film at 800 °CMaterials and Corrosion, 62
-
S. Skale, Valter Doleček, M. Slemnik (2007)
Substitution of the constant phase element by Warburg impedance for protective coatingsCorrosion Science, 49
-
Z. Liang (2018)
EFFECT OF ULTRASOUND ON Ni-Co/ZrO2 COMPOSITE ELECTRODEPOSITION AND CORROSION RESISTANCE STUDY OF COATINGS -
R. Sen, Siddhartha Das, K. Das (2011)
Effect of stirring rate on the microstructure and microhardness of Ni–CeO2 nanocomposite coating and investigation of the corrosion propertySurface & Coatings Technology, 205
-
D. Susan, A. Marder (2002)
Oxidation of Ni–Al-Base Electrodeposited Composite Coatings. I: Oxidation Kinetics and Morphology at 800°COxidation of Metals, 57
-
N. Wasekar, P. Haridoss, S. Seshadri, G. Sundararajan (2016)
Influence of mode of electrodeposition, current density and saccharin on the microstructure and hardness of electrodeposited nanocrystalline nickel coatingsSurface & Coatings Technology, 291
-
Siavash Ghanbari, F. Mahboubi (2011)
Corrosion resistance of electrodeposited Ni–Al composite coatings on the aluminum substrateMaterials & Design, 32
-
I. Napłoszek-Bilnik, A. Budniok, B. Łosiewicz, L. Paja̧k, E. Ła̧giewka (2005)
Electrodeposition of composite Ni-based coatings with the addition of Ti or/and Al particlesThin Solid Films, 474
-
M. Sri̇vastava, J. Balaraju, B. Ravisankar, C. Anandan, V. Grips (2012)
High temperature oxidation and corrosion behaviour of Ni/Ni-Co-Al composite coatingsApplied Surface Science, 263
-
M. Vamsi, N. Wasekar, G. Sundararajan (2017)
Influence of heat treatment on microstructure and mechanical properties of pulse electrodeposited Ni-W alloy coatingsSurface & Coatings Technology, 319
-
D. Jeong, F. González, G. Palumbo, K. Aust, U. Erb (2001)
THE EFFECT OF GRAIN SIZE ON THE WEAR PROPERTIES OF ELECTRODEPOSITED NANOCRYSTALLINE NICKEL COATINGSScripta Materialia, 44
- Publisher
- Emerald Publishing
- Copyright
- © Emerald Publishing Limited
- ISSN
- 0003-5599
- DOI
- 10.1108/acmm-02-2019-2079
- Publisher site
- See Article on Publisher Site
Abstract
In this study, electrochemical deposition method which have cheaper equipment than thermal spraying methods and is available for the production of composite coatings were used.Design/methodology/approachComposite coatings were electrodeposited from a Watts's bath solution in which the suspended Cr3C2-NiCr particles were dispersed in the bath solution during deposition. Potentiodynamic polarization and electrochemical impedance spectroscopy techniques have been used to evaluate the corrosion resistance of the composite coating in the 3.5 Wt.% NaCl solution.FindingsIt was found that the submicron Cr3C2-NiCr particles distributed uniformly in the coating and depend on the current density of deposition, different amount of particles can be incorporated in the coating. The results showed that the corrosion resistance of the Ni/ Cr3C2-NiCr composite coatings is more comparable to the pure nickel coating.Originality/valueProduction of Ni-base composite coating from an electrolytic bath containing Cr3C2-NiCr particles is possible via electrodeposition.
Journal
Anti-Corrosion Methods and Materials – Emerald Publishing
Published: Aug 9, 2019
Keywords: Corrosion resistance; Composite coating; Cr3C2-NiCr; Potantiodynamic polarization; Electrochemical impedance spectroscopy (EIS)