Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Measurement and Control of Coating Thickness and Porosity in Printed Wiring Manufacture

Measurement and Control of Coating Thickness and Porosity in Printed Wiring Manufacture Most of the basic requirements for the manufacture of printed wiring are, of course, well known so much so that literally hundreds of companies or divisions of larger companies are formed annually to produce these products. However, a high percentage of such companies fail, especially when new specifications are introduced or existing specifications are adhered to by the purchasing authority. There is a wide diversity of reasons for failure of printed wiring products to meet the requirements of quality and performance. Since some of these can be attributed to coating thickness andor coating porosity, it is therefore the purpose of this article to outline the ways and means to control these parameters. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Circuit World Emerald Publishing

Measurement and Control of Coating Thickness and Porosity in Printed Wiring Manufacture

Circuit World , Volume 2 (4): 6 – Mar 1, 1976

Loading next page...
 
/lp/emerald-publishing/measurement-and-control-of-coating-thickness-and-porosity-in-printed-rblc4PJiYq

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0305-6120
DOI
10.1108/eb043539
Publisher site
See Article on Publisher Site

Abstract

Most of the basic requirements for the manufacture of printed wiring are, of course, well known so much so that literally hundreds of companies or divisions of larger companies are formed annually to produce these products. However, a high percentage of such companies fail, especially when new specifications are introduced or existing specifications are adhered to by the purchasing authority. There is a wide diversity of reasons for failure of printed wiring products to meet the requirements of quality and performance. Since some of these can be attributed to coating thickness andor coating porosity, it is therefore the purpose of this article to outline the ways and means to control these parameters.

Journal

Circuit WorldEmerald Publishing

Published: Mar 1, 1976

There are no references for this article.