Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Lubricants for COLD STARTING

Lubricants for COLD STARTING In Canada and parts of the Middle West, temperatures well below 0F. are not uncommon in winter. In such cases, S.A.E. 10 W. Motor Oils are regularly used and these may even be diluted with up to 15 kerosene to overcome starting difficulties. Dilution is not a very good practice and the use of high V.I. motor oils of low pour point, suitably inhibited to give resistance to oxidation at operating temperatures is preferable. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Lubrication and Tribology Emerald Publishing

Lubricants for COLD STARTING

Industrial Lubrication and Tribology , Volume 1 (5): 3 – May 1, 1949

Loading next page...
 
/lp/emerald-publishing/lubricants-for-cold-starting-ggTgsojNFI
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0036-8792
DOI
10.1108/eb052007
Publisher site
See Article on Publisher Site

Abstract

In Canada and parts of the Middle West, temperatures well below 0F. are not uncommon in winter. In such cases, S.A.E. 10 W. Motor Oils are regularly used and these may even be diluted with up to 15 kerosene to overcome starting difficulties. Dilution is not a very good practice and the use of high V.I. motor oils of low pour point, suitably inhibited to give resistance to oxidation at operating temperatures is preferable.

Journal

Industrial Lubrication and TribologyEmerald Publishing

Published: May 1, 1949

There are no references for this article.