Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Kinematic modeling of a motorcycle rider for design of functional clothing

Kinematic modeling of a motorcycle rider for design of functional clothing Whilst motorcycling is an activity of pleasure in most parts of the world, in India, it is a regular mode of commuting. The number of registered motorized two wheelers increased at the rate of 14.7 percent during the year 2016-2017 to reach the figure of 20.19m in 2018. But, with this increase, the number of motorcycle road accidents is also increasing. Uncomfortable riding clothing is one of the major factors for motorcycle rider’s muscular fatigue, which might at times lead to serious accidents. No kinematic human models have been, so far, used for the design of protective, functional and aesthetic looking products, and the result is, hence, a compromised fit that is not protective or comfortable. The purpose of this paper is to develop virtual 3D human body models for specific postures of a motorcycle rider.Design/methodology/approachKinematic analysis of a motorcycle rider was conducted to identify typical body postures obtained by the motorcycle rider while mounting and riding a motorcycle. The identified body postures were mapped on a virtual parametric human model to obtain digital model of a motorcycle rider. 3D garment patterns for jacket and trouser were developed on all the four body postures. 3D patterns were flattened out to get 2D flat patterns that were compared and analyzed, and appropriate pattern shapes from each of the four postures were selected. Virtual fit analysis was conducted for the finally garment.FindingsIt is well established that a static 2D anthropometry fails to accurately capture the dimensions of complex 3D human form, yielding poor garment fit. Therefore, in this study, virtual, 3D human body models were developed in selected dynamic poses. Garment patterns developed in 3D have the typical movement inbuilt in them; hence, they offer more comfort and ease of motion to the wearer.Originality/valueThe identification of typical body postures of motorcycle rider has not been done before. The CAD models developed in the study can be used for the generation of ergonomic garment patterns for the motorcycle riders. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png International Journal of Clothing Science and Technology Emerald Publishing

Kinematic modeling of a motorcycle rider for design of functional clothing

Download PDF
18 pages

Loading next page...
 
/lp/emerald-publishing/kinematic-modeling-of-a-motorcycle-rider-for-design-of-functional-uNsXfZYrOS

References (31)

Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
0955-6222
DOI
10.1108/ijcst-02-2019-0020
Publisher site
See Article on Publisher Site

Abstract

Whilst motorcycling is an activity of pleasure in most parts of the world, in India, it is a regular mode of commuting. The number of registered motorized two wheelers increased at the rate of 14.7 percent during the year 2016-2017 to reach the figure of 20.19m in 2018. But, with this increase, the number of motorcycle road accidents is also increasing. Uncomfortable riding clothing is one of the major factors for motorcycle rider’s muscular fatigue, which might at times lead to serious accidents. No kinematic human models have been, so far, used for the design of protective, functional and aesthetic looking products, and the result is, hence, a compromised fit that is not protective or comfortable. The purpose of this paper is to develop virtual 3D human body models for specific postures of a motorcycle rider.Design/methodology/approachKinematic analysis of a motorcycle rider was conducted to identify typical body postures obtained by the motorcycle rider while mounting and riding a motorcycle. The identified body postures were mapped on a virtual parametric human model to obtain digital model of a motorcycle rider. 3D garment patterns for jacket and trouser were developed on all the four body postures. 3D patterns were flattened out to get 2D flat patterns that were compared and analyzed, and appropriate pattern shapes from each of the four postures were selected. Virtual fit analysis was conducted for the finally garment.FindingsIt is well established that a static 2D anthropometry fails to accurately capture the dimensions of complex 3D human form, yielding poor garment fit. Therefore, in this study, virtual, 3D human body models were developed in selected dynamic poses. Garment patterns developed in 3D have the typical movement inbuilt in them; hence, they offer more comfort and ease of motion to the wearer.Originality/valueThe identification of typical body postures of motorcycle rider has not been done before. The CAD models developed in the study can be used for the generation of ergonomic garment patterns for the motorcycle riders.

Journal

International Journal of Clothing Science and Technology – Emerald Publishing

Published: Oct 21, 2019

Keywords: Computer-aided design; Pattern making; 3D human body modelling; Functional clothing; Kinematic analysis

There are no references for this article.