Access the full text.
Sign up today, get DeepDyve free for 14 days.
M. Sajid, H. Ali (2019)
Recent advances in application of nanofluids in heat transfer devices: A critical reviewRenewable and Sustainable Energy Reviews
M. Ismael, T. Armaghani, Ali Chamkha (2016)
Conjugate heat transfer and entropy generation in a cavity filled with a nanofluid-saturated porous media and heated by a triangular solidJournal of The Taiwan Institute of Chemical Engineers, 59
Y. Konuklu, M. Ostrý, H. Paksoy, P. Charvát (2015)
Review on using microencapsulated phase change materials (PCM) in building applicationsEnergy and Buildings, 106
F. Selimefendigil, Ali Chamkha (2019)
MHD mixed convection of nanofluid in a three-dimensional vented cavity with surface corrugation and inner rotating cylinderInternational Journal of Numerical Methods for Heat & Fluid Flow
M. Khan, Nasiru Ibrahim, I. Mahbubul, H. Ali, R. Saidur, F. Al-Sulaiman (2018)
Evaluation of solar collector designs with integrated latent heat thermal energy storage: A reviewSolar Energy, 166
A. Mehrizi, M. Farhadi, H. Afroozi, K. Sedighi, A. Darz (2012)
Mixed convection heat transfer in a ventilated cavity with hot obstacle: Effect of nanofluid and outlet port locationInternational Communications in Heat and Mass Transfer, 39
N. Bondareva, M. Sheremet (2018)
Conjugate heat transfer in the PCM-based heat storage system with finned copper profile: Application in electronics coolingInternational Journal of Heat and Mass Transfer
S. Shalaby, M. Bek, A. El-sebaii (2014)
Solar dryers with PCM as energy storage medium: A reviewRenewable & Sustainable Energy Reviews, 33
Ridouane Ezzouhri, P. Joubert, F. Penot, S. Mergui (2009)
Large Eddy simulation of turbulent mixed convection in a 3D ventilated cavity: Comparison with existing dataInternational Journal of Thermal Sciences, 48
S. Kakaç, A. Pramuanjaroenkij (2009)
Review of convective heat transfer enhancement with nanofluidsInternational Journal of Heat and Mass Transfer, 52
K. Kalidasan, P. Kanna (2016)
Effective utilization of MWCNT–water nanofluid for the enhancement of laminar natural convection inside the open square enclosureJournal of The Taiwan Institute of Chemical Engineers, 65
N. Abu‐Hamdeh, Ömer Akbal, H. Oztop, A. Abusorrah, Mohannad Bayoumi (2020)
A three-dimensional computational analysis of ellipsoidal radiator with phase changeInternational Journal of Numerical Methods for Heat & Fluid Flow
A. Lariani, H. Nesreddine, N. Galanis (2009)
Numerical and Experimental Study of 3D Turbulent Airflow in a Full Scale Heated Ventilated RoomEngineering Applications of Computational Fluid Mechanics, 3
Changying Zhao, W. Lu, Yuan Tian (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)Solar Energy, 84
N. Nallusamy, S. Sampath, R. Velraj (2007)
Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sourcesRenewable Energy, 32
D. Cîmpean, M. Sheremet, I. Pop (2020)
Mixed convection of hybrid nanofluid in a porous trapezoidal chamberInternational Communications in Heat and Mass Transfer, 116
M. Esfe, M. Bahiraei, Hamid Hajbarati, Majid Valadkhani (2020)
A comprehensive review on convective heat transfer of nanofluids in porous media: Energy-related and thermohydraulic characteristicsApplied Thermal Engineering, 178
A. Usmani, R. Lewis, K. Seetharamu (1992)
Finite element modelling of natural convection controlled change of phaseInternational Journal for Numerical Methods in Fluids, 14
J. Shon, Hyungik Kim, Kihyung Lee (2014)
Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchangerApplied Energy, 113
Z. Raizah, A. Aly (2021)
A rotating superellipse inside a hexagonalshaped cavity suspended by nano-encapsulated phase change materials based on the ISPH methodInternational Journal of Numerical Methods for Heat & Fluid Flow
J. Batina, S. Blancher, Tarik Kouskou (2014)
Modelling of a Phase Change Material melting process heated from below using spectral collocation methodsInternational Journal of Numerical Methods for Heat & Fluid Flow, 24
S. Saeidi, J. Khodadadi (2006)
Forced Convection in a Square Cavity With Inlet and Outlet Ports
(2018)
Comsol user’s guide
F. Selimefendigil, H. Oztop (2021)
Analysis of hybrid nanofluid and surface corrugation in the laminar convective flow through an encapsulated PCM filled vertical cylinder and POD-based modelingInternational Journal of Heat and Mass Transfer, 178
S. Mehryan, F. Kashkooli, M. Ghalambaz, Ali Chamkha (2017)
Free convection of hybrid Al2O3-Cu water nanofluid in a differentially heated porous cavityAdvanced Powder Technology, 28
M. Ghalambaz, Ali Chamkha, D. Wen (2019)
Natural convective flow and heat transfer of Nano-Encapsulated Phase Change Materials (NEPCMs) in a cavityInternational Journal of Heat and Mass Transfer
A. Gracia, L. Cabeza (2017)
Numerical simulation of a PCM packed bed system: A reviewRenewable & Sustainable Energy Reviews, 69
S. Mat, Abduljalil Al-abidi, K. Sopian, M. Sulaiman, A. Mohammad (2013)
Enhance heat transfer for PCM melting in triplex tube with internal-external finsEnergy Conversion and Management, 74
Pushpendra Rathore, S. Shukla, N. Gupta (2020)
Potential of microencapsulated PCM for energy savings in buildings: A critical reviewSustainable Cities and Society, 53
S. Rostami, M. Afrand, A. Shahsavar, M. Sheikholeslami, Rasool Kalbasi, Saeed Aghakhani, M. Shadloo, H. Oztop (2020)
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storageEnergy, 211
S. Mehryan, M. Ghalambaz, Ali Chamkha, M. Izadi (2020)
Numerical study on natural convection of Ag–MgO hybrid/water nanofluid inside a porous enclosure: A local thermal non-equilibrium modelPowder Technology, 367
F. Selimefendigil, H. Oztop (2019)
Effects of an inner stationary cylinder having an elastic rod-like extension on the mixed convection of CNT-water nanofluid in a three dimensional vented cavityInternational Journal of Heat and Mass Transfer
R. Lewis, H. Huang, A. Usmani, M. Tadayon (1990)
Solidification in castings by finite element methodMaterials Science and Technology, 6
A. Kasaeipoor, B. Ghasemi, S. Aminossadati (2015)
Convection of Cu-water nanofluid in a vented T-shaped cavity in the presence of magnetic fieldInternational Journal of Thermal Sciences, 94
H. Sadeghi, M. Babayan, Ali Chamkha (2020)
Investigation of using multi-layer PCMs in the tubular heat exchanger with periodic heat transfer boundary conditionInternational Journal of Heat and Mass Transfer, 147
M. Pomianowski, P. Heiselberg, Yin-ping Zhang (2013)
Review of thermal energy storage technologies based on PCM application in buildingsEnergy and Buildings, 67
T. Radhakrishnan, A. Verma, C. Balaji, S. Venkateshan (2007)
An experimental and numerical investigation of mixed convection from a heat generating element in a ventilated cavityExperimental Thermal and Fluid Science, 32
Mahdi Benzema, Y. Benkahla, A. Boudiaf, S. Ouyahia, M. Ganaoui (2019)
Magnetic field impact on nanofluid convective flow in a vented trapezoidal cavity using Buongiorno's mathematical modelThe European Physical Journal Applied Physics
W. Urmi, M. Rahman, W. Hamzah (2020)
An experimental investigation on the thermophysical properties of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluidsInternational Communications in Heat and Mass Transfer, 116
K. Shirvan, M. Mamourian, R. Ellahi (2017)
Numerical investigation and optimization of mixed convection in ventilated square cavity filled with nanofluid of different inlet and outlet portInternational Journal of Numerical Methods for Heat & Fluid Flow, 27
M. Kohyani, B. Ghasemi, A. Raisi, S. Aminossadati (2017)
Melting of cyclohexane–Cu nano-phase change material (nano-PCM) in porous medium under magnetic fieldJournal of The Taiwan Institute of Chemical Engineers, 77
Ali Chamkha, A. Doostanidezfuli, E. Izadpanahi, M. Ghalambaz (2017)
Phase-change heat transfer of single/hybrid nanoparticles-enhanced phase-change materials over a heated horizontal cylinder confined in a square cavityAdvanced Powder Technology, 28
F. Javadi, H. Metselaar, P. Ganesan (2020)
Performance improvement of solar thermal systems integrated with phase change materials (PCM), a reviewSolar Energy
F. Wolff, R. Viskanta (1988)
Solidification of a pure metal at a vertical wall in the presence of liquid superheatInternational Journal of Heat and Mass Transfer, 31
Ali Chamkha, S. Jena, S. Mahapatra (2015)
MHD Convection of Nanofluids: A Review
V. Shatikian, G. Ziskind, R. Letan (2005)
Numerical investigation of a PCM-based heat sink with internal finsInternational Journal of Heat and Mass Transfer, 48
Ghofrane Sekrani, Sébastien Poncet (2018)
Ethylene- and Propylene-Glycol Based Nanofluids: A Litterature Review on Their Thermophysical Properties and Thermal PerformancesApplied Sciences
A. Dogonchi, S. Mishra, N. Karimi, Ali Chamkha, H. Alhumade (2021)
Interaction of fusion temperature on the magnetic free convection of nano-encapsulated phase change materials within two rectangular fins-equipped porous enclosureJournal of the Taiwan Institute of Chemical Engineers
F. Selimefendigil, H. Oztop (2021)
Modeling and identification of combined effects of pulsating inlet temperature and use of hybrid nanofluid on the forced convection in phase change material filled cylinderJournal of The Taiwan Institute of Chemical Engineers, 119
Sameh Ahmed (2020)
Caputo fractional convective flow in an inclined wavy vented cavity filled with a porous medium using Al2O3 - Cu hybrid nanofluidsInternational Communications in Heat and Mass Transfer, 116
Y. Khetib, Abdulataif Gari, Rasool Kalbasi (2021)
Introducing two scenarios to reduce building energy usage: PCM installation and integrating nanofluid solar collectors with DHW systemJournal of the Taiwan Institute of Chemical Engineers
Bijan Darbari, S. Rashidi (2021)
Thermal efficiency of flat plate thermosyphon solar water heater with nanofluidsJournal of the Taiwan Institute of Chemical Engineers
O. Mahian, Sahar Ghafarian, H. Sarrafha, A. Kasaeian, H. Yousefi, Wei‐Mon Yan (2021)
Phase change materials in solar photovoltaics applied in buildings: An overviewSolar Energy
S. Kherroubi, Y. Benkahla, A. Boutra, Abdelghani Bensaci (2020)
Two- and three-dimensional comparative study of heat transfer and pressure drop characteristics of nanofluids flow through a ventilated cubic cavity (part II: non-Newtonian nanofluids under the influence of a magnetic field)Journal of Thermal Analysis and Calorimetry, 147
M. Hajizadeh, F. Selimefendigil, T. Muhammad, M. Ramzan, Houman Babazadeh, Zhixiong Li (2020)
Solidification of PCM with nano powders inside a heat exchangerJournal of Molecular Liquids, 306
Soroush Ebadi, S. Tasnim, A. Aliabadi, S. Mahmud (2018)
Melting of nano-PCM inside a cylindrical thermal energy storage system: Numerical study with experimental verificationEnergy Conversion and Management
N. Wakao, T. Funazkri (1978)
EFFECT OF FLUID DISPERSION COEFFICIENTS ON PARTICLE-TO-FLUID MASS TRANSFER COEFFICIENTS IN PACKED BEDS. CORRELATION OF SHERWOOD NUMBERSChemical Engineering Science, 34
M. Ghalambaz, Ali Doostani, E. Izadpanahi, Ali Chamkha (2017)
Phase-change heat transfer in a cavity heated from below: The effect of utilizing single or hybrid nanoparticles as additivesJournal of The Taiwan Institute of Chemical Engineers, 72
E. Sourtiji, M. Gorji-Bandpy, D. Ganji, S. Hosseinizadeh (2014)
Numerical analysis of mixed convection heat transfer of Al2O3-water nanofluid in a ventilated cavity considering different positions of the outlet portPowder Technology, 262
N. Amin, M. Belusko, F. Bruno (2014)
An effectiveness-NTU model of a packed bed PCM thermal storage systemApplied Energy, 134
Laith Jasim, Hudhaifa Hamzah, Cetin Canpolat, B. Şahin (2021)
Mixed convection flow of hybrid nanofluid through a vented enclosure with an inner rotating cylinderInternational Communications in Heat and Mass Transfer
S. Karthikeyan, R. Velraj (2012)
Numerical investigation of packed bed storage unit filled with PCM encapsulated spherical containers – A comparison between various mathematical modelsInternational Journal of Thermal Sciences, 60
(2017)
Comsol multiphysics-CFD module, user’s guide
W. Alshaer, S. Nada, M. Rady, C. Bot, E. Barrio (2015)
Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipmentEnergy Conversion and Management, 89
A. Regin, S. Solanki, J. Saini (2009)
An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigationRenewable Energy, 34
Shu-Rong Yan, M. Fazilati, N. Samani, H. Ghasemi, D. Toghraie, Q. Nguyen, A. Karimipour (2020)
Energy efficiency optimization of the waste heat recovery system with embedded phase change materials in greenhouses: A thermo-economic-environmental studyJournal of energy storage, 30
A. Regin, S. Solanki, J. Saini (2008)
Heat transfer characteristics of thermal energy storage system using PCM capsules: A reviewRenewable & Sustainable Energy Reviews, 12
A. Castell, C. Sole, M. Medrano, J. Roca, L. Cabeza, Daniel Garcia (2008)
Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical finsApplied Thermal Engineering, 28
R. Mohebbi, Mohammad Rashidi (2017)
Numerical simulation of natural convection heat transfer of a nanofluid in an L-shaped enclosure with a heating obstacleJournal of The Taiwan Institute of Chemical Engineers, 72
B. Kok (2020)
Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCMApplied Thermal Engineering, 170
Chunrong Zhao, M. Opolot, Ming Liu, F. Bruno, S. Mancin, K. Hooman (2020)
Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foamsInternational Journal of Heat and Mass Transfer, 150
B. Nedjar (2002)
An enthalpy-based finite element method for nonlinear heat problems involving phase changeComputers & Structures, 80
A. Alquaity, S. Al-Dini, B. Yilbas (2013)
Investigation into thermal performance of nanosized phase change material (PCM) in microchannel flowInternational Journal of Numerical Methods for Heat & Fluid Flow, 23
Harmeet Singh, R. Saini, J. Saini (2010)
A review on packed bed solar energy storage systemsRenewable & Sustainable Energy Reviews, 14
F. Selimefendigil, H. Oztop (2020)
Impacts of magnetic field and hybrid nanoparticles in the heat transfer fluid on the thermal performance of phase change material installed energy storage system and predictive modeling with artificial neural networksJournal of energy storage, 32
M. Safaei, H. Goshayeshi, I. Chaer (2019)
Solar Still Efficiency Enhancement by Using Graphene Oxide/Paraffin Nano-PCMEnergies
G. Comini, S. Guidice, R. Lewis, O. Zienkiewicz (1974)
Finite element solution of non‐linear heat conduction problems with special reference to phase changeInternational Journal for Numerical Methods in Engineering, 8
The purpose of this study is to explore the phase change (PC) dynamics in a T-shaped ventilated cavity having multiple inlet and outlet ports during nanofluid convection with phase change material (PCM) packed bed-installed system.Design/Methodology/ApproachFinite element method was used to analyze the PC dynamics and phase completion time for encapsulated PCM within a vented cavity during the convection of nanoparticle loaded fluid. The study is performed for different Reynolds number of flow streams (Re1 and Re2 between 300 and 900), temperature difference (ΔT1 and ΔT2 between −5 and 10), aspect ratio of the cavity (between 0.5 and 1.5) and nanoparticle loading (between 0.02% and 0.1%).FindingsIt is observed that phase transition can be controlled by assigning different velocities and temperatures at the inlet ports of the T-shaped cavity. The PC becomes fast especially when the Re number and temperature of fluid in the port vary closer to the wall (second port). When the configurations with the lowest and highest Re number of the second port are considered up to 54.7% in reduction of complete phase transition time is obtained, while this amount is 78% when considering the lowest and highest inlet temperatures. The geometric factor which is the aspect ratio has also affected the flow field and PC dynamics. Up to 78% reduction in the phase transition time is obtained at the highest aspect ratio. Further improvements in the performance are achieved by using nanoparticles in the base fluid. The amounts in the phase transition time reduction are 8% and 10.5% at aspect ratio of 0.5 and 1.5 at the highest nanoparticle concentration.Originality/ValueThe thermofluid system and offered control mechanism for PC dynamics control can be considered for the design, optimization, further modeling and performance improvements of applications with PCM installed systems.
International Journal of Numerical Methods for Heat and Fluid Flow – Emerald Publishing
Published: Oct 14, 2022
Keywords: T-shaped cavity; Ventilation ports; Phase change dynamics; CFD; Hybrid nanofluid
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.