Access the full text.
Sign up today, get DeepDyve free for 14 days.
P. Gning, M. Tarfaoui, F. Collombet, L. Riou, P. Davies (2005)
Damage development in thick composite tubes under impact loading and influence on implosion pressure: experimental observationsComposites Part B-engineering, 36
Fabio Barcia, B. Soares, Marianna Gorelova, J. Cid (1999)
The effect of hydroxyl‐terminated polybutadiene‐grafted carbon fiber on the impact performance of carbon fiber–epoxy resin compositesJournal of Applied Polymer Science, 74
C. Kaynak, Aslıhan Arikan, T. Tinçer (2003)
Flexibility improvement of short glass fiber reinforced epoxy by using a liquid elastomerPolymer, 44
M. Matheswaran, K. Padmanabhan, Kishore (1995)
Static and impact behaviour of thermoplastic modified glass fabric/epoxy compositesJournal of Materials Science Letters, 14
J. Tong, Ruke Bai, Ying-fang Zou, C. Pan, S. Ichimura (1994)
Flexibility improvement of epoxy resin by using polysiloxanes and their derivativesJournal of Applied Polymer Science, 52
A. Ozturk, C. Kaynak, T. Tinçer (2001)
Effects of liquid rubber modification on the behaviour of epoxy resinEuropean Polymer Journal, 37
L. Sutherland, C. Soares (2004)
Effect of laminate thickness and of matrix resin on the impact of low fibre-volume, woven roving E-glass compositesComposites Science and Technology, 64
M. Kashtalyan, Constantinos Soutis (2007)
Stiffness and fracture analysis of laminated composites with off-axis ply matrix crackingComposites Part A-applied Science and Manufacturing, 38
A. Taşdemirci, I. Hall (2006)
Numerical and experimental studies of damage generation in a polymer composite material at high strain ratesPolymer Testing, 25
Aslıhan Arikan, C. Kaynak, T. Tinçer (2002)
Influences of liquid elastomer additive on the behavior of short glass fiber reinforced epoxyPolymer Composites, 23
P. Davies, P. Casari, L. Carlsson (2005)
Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimenComposites Science and Technology, 65
R.B. Seymour
Reinforced Plastics: Properties and Applications
S. Teh, Tianxi Liu, Lei Wang, Chaobin He (2005)
Fracture behaviour of poly(ethylene terephthalate) fiber toughened epoxy compositesComposites Part A-applied Science and Manufacturing, 36
B. Samanta, T. Maity, S. Dalai, A. Banthia (2006)
Mechanical properties of modified epoxy: effect of chain lengthPigment & Resin Technology, 35
F. Fereshteh-Saniee, G. Majzoobi, M. Bahrami (2005)
An experimental study on the behavior of glass–epoxy composite at low strain ratesJournal of Materials Processing Technology, 162
S. Kaushal, Kishore (1992)
Analysis of deformation behaviour and fracture features in glass-epoxy composites toughened by rubber and carbon additionsJournal of Materials Science Letters, 11
D. Laura, H. Keskkula, J. Barlow, D. Paul (2002)
Effect of glass fiber surface chemistry on the mechanical properties of glass fiber reinforced, rubber-toughened nylon 6Polymer, 43
Henry Lee, Kristoffer Neville (1967)
Handbook of Epoxy Resins
Purpose – The purpose of this paper is to evaluate the mechanical properties of glass fibre reinforced epoxy composites modified with amine‐terminated poly (ethylene glycol) benzoate (ATPEGB) along with their thermal stability. Design/methodology/approach – ATPEGB prepared from poly (ethylene glycol) (PEG) of different molecular weights (200, 400, 600, 4,000 and 20,000) were used as modifiers for glass fibre epoxy composite here. For toughening, 12.5 parts per hundred grams (phr) of epoxy resin of each ATPEGB was added to epoxy and pre‐reacted with it. The impact, tensile and flexural strengths of modified and unmodified composite were characterised and compared for each ATPEGB. Findings – Modified resin displayed a significant improvement in fracture toughness with glass fibre over unmodified epoxy. The modification caused the formation of oligomer domains having relatively round shapes in the matrix. These oligomer domains led to improved strength and toughness due mainly to the “rubber toughening” effect in the brittle epoxy matrix. The optimum results were obtained for composite modified with ATPEGB‐2 prepared from PEG of molecular weight 400. Research limitations/implications – In the present context, only 12.5 phr concentration of each ATPEGB was used to modify composite and the composites were made sing three layers of glass fibre. Besides, modification could also be done using other concentrations and more layers of glass fibre could also be used to make composite. Originality/value – The method for enhancing toughness of epoxy glass fibre composite was novel and finds numerous applications as surface coatings, casting and adhesive onto an intricate structure, etc.
Pigment & Resin Technology – Emerald Publishing
Published: Jan 11, 2008
Keywords: Epoxy resins; Glass; Reinforcement; Composite materials
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.