Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

High Temperature Combustion

High Temperature Combustion EXACT methods for thermodynamic calculations of high temperature combustion processes at equilibrium are very involved and timeconsuming because of the increasing influence of dissociation with increasing temperatures above 1800dcg. K. Many simplified methods have been proposed, but most of them are still rather complicated or approximate and are cither suitable for a special type of application only or based on assumptions valid within conditional limits. From the research engineer's point of view Molliercharts total heatentropy diagrams would be most useful, but for general use too many charts would be required. For every possible reaction as many charts as there are mixture ratios have to be considered. Professor Lutz of Braunschweig proposed in 1947 a new type of enthalpychart, which enables a wide range of applications to be covered by a reasonable number of charts. A number of such charts have been constructed by the Ministry of Supply. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

High Temperature Combustion

Download PDF
3 pages

Loading next page...
 
/lp/emerald-publishing/high-temperature-combustion-MBbce4svbM
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb032311
Publisher site
See Article on Publisher Site

Abstract

EXACT methods for thermodynamic calculations of high temperature combustion processes at equilibrium are very involved and timeconsuming because of the increasing influence of dissociation with increasing temperatures above 1800dcg. K. Many simplified methods have been proposed, but most of them are still rather complicated or approximate and are cither suitable for a special type of application only or based on assumptions valid within conditional limits. From the research engineer's point of view Molliercharts total heatentropy diagrams would be most useful, but for general use too many charts would be required. For every possible reaction as many charts as there are mixture ratios have to be considered. Professor Lutz of Braunschweig proposed in 1947 a new type of enthalpychart, which enables a wide range of applications to be covered by a reasonable number of charts. A number of such charts have been constructed by the Ministry of Supply.

Journal

Aircraft Engineering and Aerospace Technology – Emerald Publishing

Published: Jul 1, 1953

There are no references for this article.