Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Heat generation ability in AC magnetic field of needle‐type Ti‐coated mild steel for ablation cancer therapy

Heat generation ability in AC magnetic field of needle‐type Ti‐coated mild steel for ablation... Purpose – The purpose of this paper is to develop a ferromagnetic needle adaptable for a novel ablation cancer therapy; the heat generation ability of the mild steel rod embedded into the Ti‐tube having a different thickness was investigated in a high‐frequency output at 300 kHz. Design/methodology/approach – The outer diameter and length of the Ti‐tubes were 1.8 and 20 mm, respectively, while the inner diameter was varied from 1.6 to 0 mm. The mild steel rod was embedded in a Ti‐tube for preparing the needle‐type specimen. Their heat generation ability was examined by changing the inclination angle to the magnetic flux direction in a high‐frequency coil. Findings – When the thickness of the Ti surrounding the mild steel rod was as low as 0.1 mm, the heat generation ability was drastically different among the three inclination angles (&thetas;=0°, 45°, and 90°) to the magnetic flux direction due to the effect of the shape‐induced magnetic anisotropy. However, the effect of the inclination angle was almost eliminated in the specimen surrounded by the 0.4 mm thick Ti, suggesting that the non‐oriented heat generation property is achieved for the needle‐type mild steel rod coated with Ti having the optimum thickness. Originality/value – The prototype ablation needle having a complete non‐oriented heat generation ability was fabricated to use in subsequent animal experiments. It is considered that the newly designed Ti‐coated device is useful in ablation treatments using a high‐frequency induction heating. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering Emerald Publishing

Heat generation ability in AC magnetic field of needle‐type Ti‐coated mild steel for ablation cancer therapy

Loading next page...
 
/lp/emerald-publishing/heat-generation-ability-in-ac-magnetic-field-of-needle-type-ti-coated-89LOQGWFeT

References (11)

Publisher
Emerald Publishing
Copyright
Copyright © 2011 Emerald Group Publishing Limited. All rights reserved.
ISSN
0332-1649
DOI
10.1108/03321641111152739
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this paper is to develop a ferromagnetic needle adaptable for a novel ablation cancer therapy; the heat generation ability of the mild steel rod embedded into the Ti‐tube having a different thickness was investigated in a high‐frequency output at 300 kHz. Design/methodology/approach – The outer diameter and length of the Ti‐tubes were 1.8 and 20 mm, respectively, while the inner diameter was varied from 1.6 to 0 mm. The mild steel rod was embedded in a Ti‐tube for preparing the needle‐type specimen. Their heat generation ability was examined by changing the inclination angle to the magnetic flux direction in a high‐frequency coil. Findings – When the thickness of the Ti surrounding the mild steel rod was as low as 0.1 mm, the heat generation ability was drastically different among the three inclination angles (&thetas;=0°, 45°, and 90°) to the magnetic flux direction due to the effect of the shape‐induced magnetic anisotropy. However, the effect of the inclination angle was almost eliminated in the specimen surrounded by the 0.4 mm thick Ti, suggesting that the non‐oriented heat generation property is achieved for the needle‐type mild steel rod coated with Ti having the optimum thickness. Originality/value – The prototype ablation needle having a complete non‐oriented heat generation ability was fabricated to use in subsequent animal experiments. It is considered that the newly designed Ti‐coated device is useful in ablation treatments using a high‐frequency induction heating.

Journal

COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic EngineeringEmerald Publishing

Published: Sep 13, 2011

Keywords: High‐frequency induction heating; Hyperthermia; Shape‐induced magnetic anisotropy; Hysteresis loss; Eddy current loss; Magnetic penetration depth; Heat transfer; Steels

There are no references for this article.