Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Harmonic Torque Exciters

Harmonic Torque Exciters IN a paper on airscrewblade vibration, published in the Journal of the Royal Aeronautical Society lor September, 1937, the author gave brief descriptions of different designs of the same general typo of mechanism for exciting harmonic torques in airscrew drives for experimental purposes. 1n these exciters, harmonic inertia torque is produced by rotating a set of identical unbalanced pinions mounted in a Gage and arranged symmetrically about a shaft axis. The pinion axes are parallel to the shaft axis and the pinions are driven either by a sun gear or by an annulus gear. The gear meshing is such that the direction of unbalance for all the pinions of the set is radially outwards at the same instant when the unbalance is radially outwards or inwards there is momentarily no torque effect. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

Loading next page...
 
/lp/emerald-publishing/harmonic-torque-exciters-3P1Q0dYesB

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb030525
Publisher site
See Article on Publisher Site

Abstract

IN a paper on airscrewblade vibration, published in the Journal of the Royal Aeronautical Society lor September, 1937, the author gave brief descriptions of different designs of the same general typo of mechanism for exciting harmonic torques in airscrew drives for experimental purposes. 1n these exciters, harmonic inertia torque is produced by rotating a set of identical unbalanced pinions mounted in a Gage and arranged symmetrically about a shaft axis. The pinion axes are parallel to the shaft axis and the pinions are driven either by a sun gear or by an annulus gear. The gear meshing is such that the direction of unbalance for all the pinions of the set is radially outwards at the same instant when the unbalance is radially outwards or inwards there is momentarily no torque effect.

Journal

Aircraft Engineering and Aerospace TechnologyEmerald Publishing

Published: Aug 1, 1939

There are no references for this article.