Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

HANDLING, STORING & DISPENSING LUBRICANTS

HANDLING, STORING & DISPENSING LUBRICANTS A very wide range of equipment is today available for assisting clean and efficient methods of storing and dispensing lubricants. Whether your works uses only two grades or twenty, and whether you order in five gallon drums or 1,000 gallons in bulk, unless your handling and dispensation is clean and labour saving, there is room for improvement. It is a constant source of amazement to us to note the very lackadaisical methods employed in some of our biggest factories for storing and handling lubricants, in spite of the fact that dispensing the incorrect grade, contamination of a lubricant, or even leaky containers, can cost a lot of money in repairs, loss of production, breakdowns, etc. In this article, only fundamentals have been touched upon, but it is believed that so many works would do well to give more attention to these matters. The illustrations show only a very small proportion of the equipment available but every piece is a sound investment and an insurance against trouble. Involved and intricate systems of storekeeping are all very well in their way, but these have been seen operating in works where the cleanliness and correct handling of the lubricants have been ignored. Put first things first in the oil stores, save labour, keep the place clean and avoid waste. The best way to do this is to use suitable equipment whose first cost will be paid for by the first breakdown that it prevents. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Lubrication and Tribology Emerald Publishing

HANDLING, STORING & DISPENSING LUBRICANTS

Industrial Lubrication and Tribology , Volume 5 (7): 5 – Jul 1, 1953

Loading next page...
 
/lp/emerald-publishing/handling-storing-dispensing-lubricants-Z05sfA75s1

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0036-8792
DOI
10.1108/eb052239
Publisher site
See Article on Publisher Site

Abstract

A very wide range of equipment is today available for assisting clean and efficient methods of storing and dispensing lubricants. Whether your works uses only two grades or twenty, and whether you order in five gallon drums or 1,000 gallons in bulk, unless your handling and dispensation is clean and labour saving, there is room for improvement. It is a constant source of amazement to us to note the very lackadaisical methods employed in some of our biggest factories for storing and handling lubricants, in spite of the fact that dispensing the incorrect grade, contamination of a lubricant, or even leaky containers, can cost a lot of money in repairs, loss of production, breakdowns, etc. In this article, only fundamentals have been touched upon, but it is believed that so many works would do well to give more attention to these matters. The illustrations show only a very small proportion of the equipment available but every piece is a sound investment and an insurance against trouble. Involved and intricate systems of storekeeping are all very well in their way, but these have been seen operating in works where the cleanliness and correct handling of the lubricants have been ignored. Put first things first in the oil stores, save labour, keep the place clean and avoid waste. The best way to do this is to use suitable equipment whose first cost will be paid for by the first breakdown that it prevents.

Journal

Industrial Lubrication and TribologyEmerald Publishing

Published: Jul 1, 1953

There are no references for this article.