Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

FORGING OF A CONNECTING ROD 3D FINITE ELEMENT CALCULATIONS

FORGING OF A CONNECTING ROD 3D FINITE ELEMENT CALCULATIONS This paper presents the results of the simulation of the forging of a connecting rod. The calculation has been carried out by the code FORGE3 developed at the CEMEF laboratory. FORGE3 is a threedimensional finite element computer program that can simulate hot forging of industrial parts. The flow problem is solved using a thermomechanical analysis. The mechanical resolution and the thermal one are coupled by the way of the consistency K which is thermodependent, the plastic deformation in the volume of the material and the friction heat flux on the surface. The material behaviour is assumed to be incompressible and viscoplastic NortonHoff law with the associated friction law. The thermal resolution includes the case of nonlinear physical properties and boundary conditions. An explicit Euler scheme is used for the mechanical resolution and twostep schemes for the thermal one. For the computation of other parameters, it is necessary to have a good approximation for the strain rate tensor. The Orkisz method has been used to determine the deviatoric stress tensor and p is calculated by an original smoothing method. The results show that it is possible to get good information on the flow and on the physical properties during forging of automotive parts. Comparisons have been made with experimental measurements with a reasonably good agreement. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Engineering Computations: International Journal for Computer-Aided Engineering and Software Emerald Publishing

FORGING OF A CONNECTING ROD 3D FINITE ELEMENT CALCULATIONS

Download PDF
18 pages

Loading next page...
 
/lp/emerald-publishing/forging-of-a-connecting-rod-3d-finite-element-calculations-7j9ShjsA8p

References (18)

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0264-4401
DOI
10.1108/eb023849
Publisher site
See Article on Publisher Site

Abstract

This paper presents the results of the simulation of the forging of a connecting rod. The calculation has been carried out by the code FORGE3 developed at the CEMEF laboratory. FORGE3 is a threedimensional finite element computer program that can simulate hot forging of industrial parts. The flow problem is solved using a thermomechanical analysis. The mechanical resolution and the thermal one are coupled by the way of the consistency K which is thermodependent, the plastic deformation in the volume of the material and the friction heat flux on the surface. The material behaviour is assumed to be incompressible and viscoplastic NortonHoff law with the associated friction law. The thermal resolution includes the case of nonlinear physical properties and boundary conditions. An explicit Euler scheme is used for the mechanical resolution and twostep schemes for the thermal one. For the computation of other parameters, it is necessary to have a good approximation for the strain rate tensor. The Orkisz method has been used to determine the deviatoric stress tensor and p is calculated by an original smoothing method. The results show that it is possible to get good information on the flow and on the physical properties during forging of automotive parts. Comparisons have been made with experimental measurements with a reasonably good agreement.

Journal

Engineering Computations: International Journal for Computer-Aided Engineering and Software – Emerald Publishing

Published: Jan 1, 1992

There are no references for this article.