Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Finite element modeling and identification of metallic materials step responses

Finite element modeling and identification of metallic materials step responses Purpose – The purpose of this paper is to study the optimization of a pulsed-excitation gradiometric inductive sensing system. Design/methodology/approach – The authors applied numerical finite-element modeling for the simulation of the step responses of different target materials to identify the particular contribution of the magnetic permeability and the electric conductivity. Four materials of technical importance (aluminum, copper, constructional steel and stainless steel) and four fictive test materials were modeled for the comparison of different materials possessing a wide range of combinations of material parameters. A microcontroller-based measurement setup was implemented for the qualitative validation of the simulation results. A simple signal processing chain was also applied for the time-domain conversion of the direct step response signals to increase the time scale of the signals to be processed by common mixed-signal components. Findings – The step response signals contain relevant information of the target material quality and the sensor-to-target distance. The target materials can be distinguished and the sensor-target distance can be determined by the evaluation of the step response signals with an appropriate algorithm based on the measurement of the time and voltage of an extreme of the time dependent measurement signals. Both direct and time-domain converted signals can be used for material independent proximity sensing. Originality/value – In order to design an inductive proximity switch, an evaluation method of the response signals has been proposed by using an analog RLC circuit. With the presented method, a target material invariant inductive proximity switch can be realized. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering Emerald Publishing

Finite element modeling and identification of metallic materials step responses

Download PDF
15 pages

Loading next page...
 
/lp/emerald-publishing/finite-element-modeling-and-identification-of-metallic-materials-step-5A7eW6tRjy
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0332-1649
DOI
10.1108/COMPEL-11-2013-0349
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this paper is to study the optimization of a pulsed-excitation gradiometric inductive sensing system. Design/methodology/approach – The authors applied numerical finite-element modeling for the simulation of the step responses of different target materials to identify the particular contribution of the magnetic permeability and the electric conductivity. Four materials of technical importance (aluminum, copper, constructional steel and stainless steel) and four fictive test materials were modeled for the comparison of different materials possessing a wide range of combinations of material parameters. A microcontroller-based measurement setup was implemented for the qualitative validation of the simulation results. A simple signal processing chain was also applied for the time-domain conversion of the direct step response signals to increase the time scale of the signals to be processed by common mixed-signal components. Findings – The step response signals contain relevant information of the target material quality and the sensor-to-target distance. The target materials can be distinguished and the sensor-target distance can be determined by the evaluation of the step response signals with an appropriate algorithm based on the measurement of the time and voltage of an extreme of the time dependent measurement signals. Both direct and time-domain converted signals can be used for material independent proximity sensing. Originality/value – In order to design an inductive proximity switch, an evaluation method of the response signals has been proposed by using an analog RLC circuit. With the presented method, a target material invariant inductive proximity switch can be realized.

Journal

COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering – Emerald Publishing

Published: Oct 28, 2014

There are no references for this article.