Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You and Your Team.

Learn More →

Feasibility of Glutaraldehyde as a Non-formaldehyde Durable Press Finish for Cotton Fabrics

Feasibility of Glutaraldehyde as a Non-formaldehyde Durable Press Finish for Cotton Fabrics Glutaraldehyde is chosen as a novel non-formaldehyde durable press finish for cotton fabrics in this investigation. The optimum technique conditions and influences of glutaraldehyde concentration and catalysts, pH value, and curing conditions for the properties of the finished fabric have been investigated in detail. The finished fabric achieves the best performance with a pH value in the range of 4 to 4.5 for the glutaraldehyde finishing bath, magnesium chloride as the catalyst, and curing conditions of 160oC for 3 minutes. In addition, in contrast to low formaldehyde resin and non-formaldehyde finishers sold in the market, the wrinkle recovery angle of the fabric finished with glutaraldehyde is better than that finished with FREEREZ NFR (DHDMI), but not as satisfactory as that finished with FREEREZ 880 (low formaldehyde 2D). However, its strength is greater than the fabric finished with FREEREZ 880, but less so than that finished with FREEREZ NFR. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Research Journal of Textile and Apparel Emerald Publishing

Feasibility of Glutaraldehyde as a Non-formaldehyde Durable Press Finish for Cotton Fabrics

Loading next page...
 
/lp/emerald-publishing/feasibility-of-glutaraldehyde-as-a-non-formaldehyde-durable-press-MrzCT0tbPE
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
1560-6074
DOI
10.1108/RJTA-15-03-2011-B014
Publisher site
See Article on Publisher Site

Abstract

Glutaraldehyde is chosen as a novel non-formaldehyde durable press finish for cotton fabrics in this investigation. The optimum technique conditions and influences of glutaraldehyde concentration and catalysts, pH value, and curing conditions for the properties of the finished fabric have been investigated in detail. The finished fabric achieves the best performance with a pH value in the range of 4 to 4.5 for the glutaraldehyde finishing bath, magnesium chloride as the catalyst, and curing conditions of 160oC for 3 minutes. In addition, in contrast to low formaldehyde resin and non-formaldehyde finishers sold in the market, the wrinkle recovery angle of the fabric finished with glutaraldehyde is better than that finished with FREEREZ NFR (DHDMI), but not as satisfactory as that finished with FREEREZ 880 (low formaldehyde 2D). However, its strength is greater than the fabric finished with FREEREZ 880, but less so than that finished with FREEREZ NFR.

Journal

Research Journal of Textile and ApparelEmerald Publishing

Published: Aug 1, 2011

There are no references for this article.