Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Experience with Trimming of Chip Resistors and how to Improve Trimming Results with CAD Simulation and Thick Film Process Control

Experience with Trimming of Chip Resistors and how to Improve Trimming Results with CAD... High speed chip resistor trimming requires a more advanced technology than just passive networktrimming. Some guidelines have to be observed to obtain a good approach to the desired goal. One fast and inexpensive way of finding the best parameters for a trim cut, i.e., maximum speed and best accuracy, is CADnetwork simulation. Last but not least several parameters should be checked and controlled continuously to optimise yield. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Microelectronics International Emerald Publishing

Experience with Trimming of Chip Resistors and how to Improve Trimming Results with CAD Simulation and Thick Film Process Control

Ronniger, R.
Microelectronics International , Volume 3 (1): 4 – Jan 1, 1986
Download PDF
4 pages

Loading next page...
 
/lp/emerald-publishing/experience-with-trimming-of-chip-resistors-and-how-to-improve-trimming-cfUgNc2evL
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
1356-5362
DOI
10.1108/eb044214
Publisher site
See Article on Publisher Site

Abstract

High speed chip resistor trimming requires a more advanced technology than just passive networktrimming. Some guidelines have to be observed to obtain a good approach to the desired goal. One fast and inexpensive way of finding the best parameters for a trim cut, i.e., maximum speed and best accuracy, is CADnetwork simulation. Last but not least several parameters should be checked and controlled continuously to optimise yield.

Journal

Microelectronics International – Emerald Publishing

Published: Jan 1, 1986

There are no references for this article.