Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/emerald-publishing/empirical-modelling-of-surface-mount-solder-joints-from-132-pin-quad-IfzuXRrKR1
References (0)
References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.
- Publisher
- Emerald Publishing
- Copyright
- Copyright © Emerald Group Publishing Limited
- ISSN
- 0954-0911
- DOI
- 10.1108/eb037772
- Publisher site
- See Article on Publisher Site
Abstract
Tensile pull strength tests were used to study the strength of solder joints of 25 mil gull wing leads on 132 pin quad flat pack components. The authors generated quadratic and linear models which can be used to predict the pull strength of a solder joint given its geometry. The shape parameters studied were standoff height between the lead and substrate, height of heel fillet, radius of curvature of heel fillet, length of heel fillet, height of solder at toe region, and thickness of solder on the lead. The most significant parameters in determining the tensile pull strength of the solder joint are the height and length of the heel fillet. A study was performed to quantify the effect of lead finish on the accuracy of these models. The lead finish was found to have a significant effect on the solder joint strength. The effect of lateral misregistration on the tensile pull strength of solder joints was also investigated. No correlation between the extent of lateral misregistration and joint pull strength has been found.
Journal
Soldering & Surface Mount Technology – Emerald Publishing
Published: Jan 1, 1992