Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Developments in Explosive Welding

Developments in Explosive Welding THE possibility of explosive cladding was first recognised in 1957, when it was noted in explosive forming that if a metal die was employed and an excessive charge was used then the metal sheet which was being formed became welded to the die. Since that time numerous papers have been published, for instance Davenport and Duvall Ref. 1, Pearson Ref. 2, Holtzman and Ruderhausen Ref. 3, Boes Ref. 4, and Bahrani and Crossland Ref. 5 to mention but a few. All the early work was devoted to the application of cladding, and it is only during the last two or three years that the applicability of the process to tube welding, lap welding, welding of tees has been mentioned. At the present time the main potential fields of application are to the cladding of dissimilar metals over large areas and the welding of tubes to tube plates. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

Developments in Explosive Welding

Download PDF
3 pages

Loading next page...
 
/lp/emerald-publishing/developments-in-explosive-welding-u06gZjqxyZ

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb034451
Publisher site
See Article on Publisher Site

Abstract

THE possibility of explosive cladding was first recognised in 1957, when it was noted in explosive forming that if a metal die was employed and an excessive charge was used then the metal sheet which was being formed became welded to the die. Since that time numerous papers have been published, for instance Davenport and Duvall Ref. 1, Pearson Ref. 2, Holtzman and Ruderhausen Ref. 3, Boes Ref. 4, and Bahrani and Crossland Ref. 5 to mention but a few. All the early work was devoted to the application of cladding, and it is only during the last two or three years that the applicability of the process to tube welding, lap welding, welding of tees has been mentioned. At the present time the main potential fields of application are to the cladding of dissimilar metals over large areas and the welding of tubes to tube plates.

Journal

Aircraft Engineering and Aerospace Technology – Emerald Publishing

Published: Dec 1, 1968

There are no references for this article.