Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Development of planar electromagnetic sensor array for nitrate and sulphate detection in natural water sources

Development of planar electromagnetic sensor array for nitrate and sulphate detection in natural... Purpose – The purpose of this study is to determine the contamination level in natural water resources because the tremendous development in the agriculture sector has increased the amount of contamination in natural water sources. Hence, the water is polluted and unsafe to drink. Design/methodology/approach – Three types of sensor arrays were suggested: parallel, star and delta. The simulation of all types of sensor array was carried out to calculate the sensors’ impedance value, capacitance and inductance during their operation to determine the best sensor array. The contamination state was simulated by altering the electrical properties values of the environmental domain of the model to represent water contamination. Findings – The simulation results show that all types of sensor array are sensitive to conductivity, σ, and permittivity, ɛ (i.e. contaminated water). Furthermore, a set of experiments was conducted to determine the relationship between the sensor’s impedance and the water’s nitrate and sulphate contamination. The performance of the system was observed where the sensors were tested, with the addition of distilled water with different concentrations of potassium nitrate and potassium sulphate. The sensitivity of the developed sensors was evaluated and the best sensor was selected. Practical implications – Based on the outcomes of the experiments, the star sensor array has the highest sensitivity and can be used to measure nitrate and sulphate contaminations in water. Originality/value – The star sensor array presented in this paper has the potential to be used as a useful low-cost tool for water source monitoring. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Sensor Review Emerald Publishing

Development of planar electromagnetic sensor array for nitrate and sulphate detection in natural water sources

Download PDF
10 pages

Loading next page...
 
/lp/emerald-publishing/development-of-planar-electromagnetic-sensor-array-for-nitrate-and-vDivN0Z3tT
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0260-2288
DOI
10.1108/SR-04-2014-633
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this study is to determine the contamination level in natural water resources because the tremendous development in the agriculture sector has increased the amount of contamination in natural water sources. Hence, the water is polluted and unsafe to drink. Design/methodology/approach – Three types of sensor arrays were suggested: parallel, star and delta. The simulation of all types of sensor array was carried out to calculate the sensors’ impedance value, capacitance and inductance during their operation to determine the best sensor array. The contamination state was simulated by altering the electrical properties values of the environmental domain of the model to represent water contamination. Findings – The simulation results show that all types of sensor array are sensitive to conductivity, σ, and permittivity, ɛ (i.e. contaminated water). Furthermore, a set of experiments was conducted to determine the relationship between the sensor’s impedance and the water’s nitrate and sulphate contamination. The performance of the system was observed where the sensors were tested, with the addition of distilled water with different concentrations of potassium nitrate and potassium sulphate. The sensitivity of the developed sensors was evaluated and the best sensor was selected. Practical implications – Based on the outcomes of the experiments, the star sensor array has the highest sensitivity and can be used to measure nitrate and sulphate contaminations in water. Originality/value – The star sensor array presented in this paper has the potential to be used as a useful low-cost tool for water source monitoring.

Journal

Sensor Review – Emerald Publishing

Published: Jan 19, 2015

There are no references for this article.