Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Corrosion in the Petroleum Industry PART 1

Corrosion in the Petroleum Industry PART 1 For economic reasons it is most essential that oil refineries should remain on stream for as long a period as possible. However, shutdowns for inspection purposes are nevertheless imperative, but it is again necessary that these be kept to a minimum. One of the most important factors in postponing shutdowns is the elimination of corrosion and erosion. In this series of articles the whole question of corrosioti in the oil industry is discussed by two authorities. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Anti-Corrosion Methods and Materials Emerald Publishing

Corrosion in the Petroleum Industry PART 1

Anti-Corrosion Methods and Materials , Volume 2 (5): 4 – May 1, 1955

Loading next page...
 
/lp/emerald-publishing/corrosion-in-the-petroleum-industry-part-1-nVsAuZKT3q

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0003-5599
DOI
10.1108/eb019055
Publisher site
See Article on Publisher Site

Abstract

For economic reasons it is most essential that oil refineries should remain on stream for as long a period as possible. However, shutdowns for inspection purposes are nevertheless imperative, but it is again necessary that these be kept to a minimum. One of the most important factors in postponing shutdowns is the elimination of corrosion and erosion. In this series of articles the whole question of corrosioti in the oil industry is discussed by two authorities.

Journal

Anti-Corrosion Methods and MaterialsEmerald Publishing

Published: May 1, 1955

There are no references for this article.