Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Computer‐aided fixture design verification

Computer‐aided fixture design verification Computer‐aided fixture design (CAFD) techniques have been advanced so rapidly that computers can now generate fixture configurations automatically, for both modular fixtures and dedicated fixtures. Computer‐aided fixture design verification (CAFDV) is the techniques for verifying and improving existing fixture designs. It verifies the followings: geometric constraining ability, achieved tolerance, fixturing stability, and fixturing accessibility. Two models – one geometric and one kinematic – are created for the verification. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Assembly Automation Emerald Publishing

Computer‐aided fixture design verification

Y. Kang; Y. Rong; J. Yang; W. Ma
Assembly Automation , Volume 22 (4): 10 – Dec 1, 2002
Download PDF
10 pages

Loading next page...
 
/lp/emerald-publishing/computer-aided-fixture-design-verification-Ft8nsNbms9
Publisher
Emerald Publishing
Copyright
Copyright © 2002 MCB UP Ltd. All rights reserved.
ISSN
0144-5154
DOI
10.1108/01445150210446229
Publisher site
See Article on Publisher Site

Abstract

Computer‐aided fixture design (CAFD) techniques have been advanced so rapidly that computers can now generate fixture configurations automatically, for both modular fixtures and dedicated fixtures. Computer‐aided fixture design verification (CAFDV) is the techniques for verifying and improving existing fixture designs. It verifies the followings: geometric constraining ability, achieved tolerance, fixturing stability, and fixturing accessibility. Two models – one geometric and one kinematic – are created for the verification.

Journal

Assembly Automation – Emerald Publishing

Published: Dec 1, 2002

Keywords: Design; Parts feeding; Computer aided engineering

References

  • Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures
    Asada, H.; By, A.
  • On the closure properties of robotic grasping
    Bicchi, A.
  • Fixturing surface accessibility analysis for automated fixture design
    Li, J.; Ma, W.; Rong, Y.
  • Stability index and contact configuration planning for multifingered grasp
    Xiong, C.; Xiong, Y.