Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You and Your Team.

Learn More →

Collision detection method for industrial robot based on envelope-like lines

Collision detection method for industrial robot based on envelope-like lines Successful sensorless collision detection by a robot depends on the accuracy with which the external force/torque can be estimated. Compared with collaborative robots, industrial robots often have larger parameter values of their dynamic models and larger errors in parameter identification. In addition, the friction inside a reducer affects the accuracy of external force estimation. The purpose of this paper is to propose a collision detection method for industrial robots. The proposed method does not require additional equipment, such as sensors, and enables highly sensitive collision detection while guaranteeing a zero false alarm rate.Design/methodology/approachThe error on the calculated torque for a robot in stable motion is analyzed, and a typical torque error curve is presented. The variational characteristics of the joint torque error during a collision are analyzed, and collisions are classified into two types: hard and soft. A pair of envelope-like lines with an effect similar to that of the true envelope lines is designed. By using these envelope-like lines, some components of the torque calculation error can be eliminated, and the sensitivity of collision detection can be improved.FindingsThe proposed collision detection method based on envelope-like lines can detect hard and soft collisions during the motion of industrial robots. In repeated experiments without collisions, the false alarm rate was 0 per cent, and in repeated experiments with collisions, the rate of successful detection was 100 per cent. Compared with collision detection method based on symmetric thresholds, the proposed method has a smaller detection delay and the same detection sensitivity for different joint rotation directions.Originality/valueA collision detection method for industrial robots based on envelope-like lines is proposed in this paper. The proposed method does not require additional equipment or complex algorithms, and highly sensitive collision detection can be achieved with zero false alarms. The proposed method is low in cost and highly practical and can be widely used in applications involving industrial robots. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Robot: The International Journal of Robotics Research and Application Emerald Publishing

Collision detection method for industrial robot based on envelope-like lines

Loading next page...
 
/lp/emerald-publishing/collision-detection-method-for-industrial-robot-based-on-envelope-like-KfDOoM3KRc
Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
0143-991X
DOI
10.1108/ir-12-2018-0261
Publisher site
See Article on Publisher Site

Abstract

Successful sensorless collision detection by a robot depends on the accuracy with which the external force/torque can be estimated. Compared with collaborative robots, industrial robots often have larger parameter values of their dynamic models and larger errors in parameter identification. In addition, the friction inside a reducer affects the accuracy of external force estimation. The purpose of this paper is to propose a collision detection method for industrial robots. The proposed method does not require additional equipment, such as sensors, and enables highly sensitive collision detection while guaranteeing a zero false alarm rate.Design/methodology/approachThe error on the calculated torque for a robot in stable motion is analyzed, and a typical torque error curve is presented. The variational characteristics of the joint torque error during a collision are analyzed, and collisions are classified into two types: hard and soft. A pair of envelope-like lines with an effect similar to that of the true envelope lines is designed. By using these envelope-like lines, some components of the torque calculation error can be eliminated, and the sensitivity of collision detection can be improved.FindingsThe proposed collision detection method based on envelope-like lines can detect hard and soft collisions during the motion of industrial robots. In repeated experiments without collisions, the false alarm rate was 0 per cent, and in repeated experiments with collisions, the rate of successful detection was 100 per cent. Compared with collision detection method based on symmetric thresholds, the proposed method has a smaller detection delay and the same detection sensitivity for different joint rotation directions.Originality/valueA collision detection method for industrial robots based on envelope-like lines is proposed in this paper. The proposed method does not require additional equipment or complex algorithms, and highly sensitive collision detection can be achieved with zero false alarms. The proposed method is low in cost and highly practical and can be widely used in applications involving industrial robots.

Journal

Industrial Robot: The International Journal of Robotics Research and ApplicationEmerald Publishing

Published: Aug 5, 2019

Keywords: Industrial robot; Collision detection; Envelope; Torque error

References