Access the full text.
Sign up today, get DeepDyve free for 14 days.
F. Krause, W. Bach, J. Koomey (1992)
Energy Policy in the Greenhouse: From Warming Fate to Warming Limit
R. Lowe (2000)
Defining and meeting the carbon constraints of the 21st centuryBuilding Research & Information, 28
BRECSU
The Government’s Standard Assessment Procedure for Energy rating of Dwellings
prEN ISO 10077‐2
Thermal Performance of Windows, Doors and Shutters – Calculation of Thermal Transmittance – Part 2: Numerical Method for Frames
CD/ISO 15099
Windows and Doors – Thermal Transmission Properties – Detailed Calculations
R. Lowe, D. Johnston, M. Bell (2000)
Review of possible implications of an airtightness standard for new dwellings in the UKBuilding Services Engineering Research & Technology, 21
E. Perera, L Parkins
Airtightness of UK buildings: status and future possibilities
J.B. Siviour (1994)
Experimental U-values of some house wallsBuilding Services Engineering Research & Technology, 15
DoE and Welsh Office
The Building Regulations; 1991 Approved Document L (1995): Conservation of Fuel and Power
Building and Planning Swedish Board for Housing
Värmeisolering: Värmegenomgångskoefficenter för Byggnadsdelar och Kölbryggor, Tjälfri Nivå, (Thermal Insulation: Heat Transfer Coefficients for Building Elements and Cold Bridges)
R.J. Lowe, T. Oreszczyn, Robinson P
Review of existing window energy rating systems and outline of a possible system for the UK
G. Hauser, H. Stiegel (1990)
Wärmebrücken-Atlas für den Mauerwerksbau
G. Hauser, H. Stiegel (1992)
Wärmebrücken-Atlas für den Holzbau
prEN ISO 10077‐1
Thermal Performance of Windows, Doors and Shutters – Calculation of Thermal Transmittance – Part 1: Simplified Calculation Method for Windows
B. Carlsson, A. Elmroth, P. Engvall (1980)
Airtightness and thermal insulation : building design solutions
BS EN ISO 6946
Building Elements and Building Elements – Thermal Resistance and Thermal Transmittance (U Value) – Calculation Method
CSA
CSA Standards: A440‐M98 Windows and A440.2 Energy Performance Evaluation of Windows and Sliding Glass Doors
BS EN 410
Glass in Building: Determination of Total Solar Energy Transmittance: Calculation Method
M. Bell, R. Lowe (2000)
Building regulation and sustainable housing. Part 1: a critique of Part L of the Building Regulations 1995 for England and WalesStructural Survey, 18
ASHRAE
ASHRAE Handbook 1993: Fundamentals
Anon
The Development of a UK Domestic Window Energy Rating System
J. Houghton, L. Filho, B. Callander, N. Harris, A. Kattenberg, K. Maskell (1996)
Climate change 1995: the science of climate change.
DoE and Welsh Office
The Building Regulations 1991; Approved Document F (1995): Ventilation
CANMET
Advanced House Technical Requirement
R.J Lowe, M. Bell
Towards Sustainable Housing: Building Regulation for the 21st Century
R.K Stephen
Airtightness in UK Dwellings: BRE’s Test Results and their Significance
R.K Stephen
Airtightness in UK Dwellings
E. Walke, A. Hay (1999)
Carbon monoxide poisoningBMJ, 319
R.J Lowe, D.K Johnston
Mechanical Ventilation with Heat Recovery in Local Authority, Low Rise Housing: Final Report on the Derwentside Field Trial
C.G Bankvall
Påtvingad konvektion. Praktisk värmeisoleringsförmåga under inverkan av vind och arbetsudförande (Forced Convection. Thermal Insulation Influenced by Wind and Workmanship)
DoE and Welsh Office
The Building Regulations 1985; Approved Document J (1990): Heat Producing Appliances
S.M Doran, M.C Phillipson, B.R. Anderson
Review of the Operation of the 1995 Edition of the Regulations for the Conservation of Fuel and Power (England and Wales)
BS EN ISO 10211‐1
Thermal Bridges in Building Construction – Heat Flows and Surface Temperatures – Part 1: General Calculation Methods
ISO 9972
Thermal Insulation – Determination of Building Airtightness – Fan Pressurisation Method
If the building control system is to deliver housing which achieves major reductions in carbon dioxide emissions, it is important to ensure not only that energy efficiency standards are set at an appropriate level but also that the specification of standards takes into account realised performance. It is argued in this paper that, in many cases, there is a large gap between notional performance, as defined by the calculation methods embodied in the Building Regulations, and performance achieved in practice. Although it is accepted that some variation in performance is to be expected, there are a number of areas where closer attention to the methods used to estimate thermal performance, and the inclusion of hitherto unregulated aspects, could help to achieve a much closer match between what is expected and what is achieved. In particular, the paper discusses ways in which the Regulations could be improved so that the impact of thermal bridging, construction quality, window performance and airtightness are more closely controlled.
Structural Survey – Emerald Publishing
Published: May 1, 2000
Keywords: Building regulations; Energy; Efficiency; Housing
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.