Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Back‐reflector design in thin‐film silicon solar cells by rigorous 3D light propagation modeling

Back‐reflector design in thin‐film silicon solar cells by rigorous 3D light propagation modeling Purpose – The purpose of this paper is to find an optimized thin‐film amorphous silicon solar cell design by numerically optimizing the light trapping efficiency of a pyramid‐structured back‐reflector using a frequency‐domain finite element Maxwell solver. For this purpose short circuit current densities and absorption spectra within the investigated solar cell model are systematically analyzed. Furthermore, the authors employ a topology simulation method to accurately predict the material layer interfaces within the investigated solar cell model. The method simulates the chemical vapor deposition (CVD) process that is typically used to fabricate thin‐film solar cells by combining a ballistic transport and reaction model (BTRM) with a level‐set method in an iterative approach. Predicted solar cell models are far more realistic compared to solar cell models created assuming conformal material growth. The purpose of the topology simulation method is to increase the accuracy of thin‐film solar cell models in order to facilitate highly accurate simulation results in solar cell design optimizations. Design/methodology/approach – The authors perform numeric optimizations using a frequency domain finite element Maxwell solver. Topology simulations are carried out using a BTRM combined with a level‐set method in an iterative fashion. Findings – The simulation results reveal that the employed pyramid structured back‐reflectors effectively increase the light path in the absorber mainly by exciting photonic waveguide modes. In using the optimization approach, the authors have identified solar cell models with cell periodicities around 480 nm and pyramid base widths around 450 nm to yield the highest short circuit current densities. Compared to equivalent solar cell models with flat back‐reflectors, computed short circuit current densities are significantly increased. Furthermore, the paper finds that the solar cell models computed using the topology simulation approach represent a far more realistic approximation to a real solar cell stack compared to solar cell models computed by a conformal material growth assumption. Research limitations/implications – So far in the topology simulation approach the authors assume CVD as the material deposition process for all material layers. However, during the fabrication process sputtering (i.e. physical vapor deposition) will be employed for the Al:ZnO and ITO layers. In the framework of this ongoing research project the authors will extend the topology simulation approach to take the different material deposition processes into account. The differences in predicted material interfaces will presumably be only minor compared to the results shown here and certainly be insignificant relative to the differences the authors observe for solar cell models computed assuming conformal material growth. Originality/value – The authors systematically investigate and optimize the light trapping efficiency of a pyramid nano‐structured back‐reflector using rigorous electromagnetic field computations with a 3D finite element Maxwell solver. To the authors’ knowledge such an investigation has not been carried out yet in the solar cell research literature. The topology simulation approach (to the best of the authors’ knowledge) has previously not been applied to the modelling of solar cells. Typically a conformal layer growth assumption is used instead. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering Emerald Publishing

Back‐reflector design in thin‐film silicon solar cells by rigorous 3D light propagation modeling

Download PDF
14 pages

Loading next page...
 
/lp/emerald-publishing/back-reflector-design-in-thin-film-silicon-solar-cells-by-rigorous-3d-IDC0arVgtL
Publisher
Emerald Publishing
Copyright
Copyright © 2014 Emerald Group Publishing Limited. All rights reserved.
ISSN
0332-1649
DOI
10.1108/COMPEL-12-2012-0367
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this paper is to find an optimized thin‐film amorphous silicon solar cell design by numerically optimizing the light trapping efficiency of a pyramid‐structured back‐reflector using a frequency‐domain finite element Maxwell solver. For this purpose short circuit current densities and absorption spectra within the investigated solar cell model are systematically analyzed. Furthermore, the authors employ a topology simulation method to accurately predict the material layer interfaces within the investigated solar cell model. The method simulates the chemical vapor deposition (CVD) process that is typically used to fabricate thin‐film solar cells by combining a ballistic transport and reaction model (BTRM) with a level‐set method in an iterative approach. Predicted solar cell models are far more realistic compared to solar cell models created assuming conformal material growth. The purpose of the topology simulation method is to increase the accuracy of thin‐film solar cell models in order to facilitate highly accurate simulation results in solar cell design optimizations. Design/methodology/approach – The authors perform numeric optimizations using a frequency domain finite element Maxwell solver. Topology simulations are carried out using a BTRM combined with a level‐set method in an iterative fashion. Findings – The simulation results reveal that the employed pyramid structured back‐reflectors effectively increase the light path in the absorber mainly by exciting photonic waveguide modes. In using the optimization approach, the authors have identified solar cell models with cell periodicities around 480 nm and pyramid base widths around 450 nm to yield the highest short circuit current densities. Compared to equivalent solar cell models with flat back‐reflectors, computed short circuit current densities are significantly increased. Furthermore, the paper finds that the solar cell models computed using the topology simulation approach represent a far more realistic approximation to a real solar cell stack compared to solar cell models computed by a conformal material growth assumption. Research limitations/implications – So far in the topology simulation approach the authors assume CVD as the material deposition process for all material layers. However, during the fabrication process sputtering (i.e. physical vapor deposition) will be employed for the Al:ZnO and ITO layers. In the framework of this ongoing research project the authors will extend the topology simulation approach to take the different material deposition processes into account. The differences in predicted material interfaces will presumably be only minor compared to the results shown here and certainly be insignificant relative to the differences the authors observe for solar cell models computed assuming conformal material growth. Originality/value – The authors systematically investigate and optimize the light trapping efficiency of a pyramid nano‐structured back‐reflector using rigorous electromagnetic field computations with a 3D finite element Maxwell solver. To the authors’ knowledge such an investigation has not been carried out yet in the solar cell research literature. The topology simulation approach (to the best of the authors’ knowledge) has previously not been applied to the modelling of solar cells. Typically a conformal layer growth assumption is used instead.

Journal

COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering – Emerald Publishing

Published: Jul 1, 2014

Keywords: 3D FEM; Applied electromagnetics; Optimal design; CAD

References

  • Limitations of ray tracing techniques in optical modeling of silicon solar cells and photodiodes
    Abouelsaood, A.A.; Ghannam, M.Y.; Omar, A.S.A.
  • Plasmonics for improved photovoltaic devices
    Atwater, H.A.; Polman, A.
  • Flux distributions in low pressure deposition and etch models
    Cale, T.
  • Thin Films: Modeling of Film Deposition for Microelectronic Applications
    Cale, T.S.; Mahadev, V.
  • Optical enhancement and losses of pyramid textured thin‐film silicon solar cells
    Dewan, R.; Vasilev, I.; Jovanov, V.; Knipp, D.
  • Improved red response in thin film a‐si:h solar cells with soft‐imprinted plasmonic back reflectors
    Ferry, V.E.; Verschuuren, M.A.; Li, H.B.T.; Schropp, R.E.I.; Atwater, H.A.; Polman, A.
  • Recent progress in nanoimprint technology and its applications
    Guo, L.
  • Thin‐film silicon solar cells with efficient periodic light trapping texture
    Haase, C.; Stiebig, H.
  • Comparison of electromagnetic field solvers for the 3d analysis of plasmonic nano antennas
    Hoffmann, J.; Hafner, C.; Leidenberger, P.; Hesselbarth, J.; Burger, S.
  • 3‐d optical modeling of thin‐film silicon solar cells on diffraction gratings
    Isabella, O.; Solntsev, S.; Caratelli, D.; Zeman, M.
  • Optical constants of the noble metals
    Johnson, P.B.; Christy, R.W.
  • Optical modeling of thin film silicon solar cells with random and periodic light management textures
    Lockau, D.
  • Rigorous optical simulation of light management in crystalline silicon thin film solar cells with rough interface textures
    Lockau, D.; Zschiedrich, L.; Burger, S.; Schmidt, F.; Ruske, F.; Rech, B.
  • Feature length‐scale modeling of LPCVD and PECVD MEMS fabrication processes
    Musson, L.C.; Ho, P.; Plimpton, S.J.; Schmidt, R.C.
  • Design of nanostructured plasmonic back contacts for thin‐film silicon solar cells
    Paetzold, U.W.; Moulin, E.; Pieters, B.E.; Carius, R.; Rau, U.
  • Adaptive finite element method for simulation of optical nano structures
    Pomplun, J.; Burger, S.; Zschiedrich, L.; Schmidt, F.
  • A Lagrangian approach to dynamic interfaces through kinetic triangulation of the ambient space
    Pons, J.‐P.; Boissonnat, J.‐D.
  • NETGEN – an advancing front 2D/3D‐mesh generator based on abstract rules
    Schöberl, J.
  • Level Set Methods and Fast Marching Methods
    Sethian, J.A.
  • Optimization‐based design of surface textures for thin‐film si solar cells
    Sheng, X.; Johnson, S.G.; Michel, J.; Kimerling, L.C.
  • Three dimensional boundary conforming Delaunay mesh generation
    Si, H.
  • Plasmonic light trapping in thin‐film si solar cells
    Spinelli, P.; Ferry, V.E.; van de Groep, J.; van Lare, M.; Verschuuren, M.A.; Schropp, R.E.I.; Atwater, H.A.; Polman, A.
  • Contributions to spatial and temporal 3‐D reconstruction from multiple cameras
    Zaharescu, A.
  • Two‐ and three‐dimensional optical carrier generation determination in crystalline silicon solar cells
    Zechner, C.; Fath, P.; Willeke, G.; Bucher, E.
  • Light‐trapping enhancement in thin film solar cells with photonic crystals
    Zhou, D.
  • Nanostructured photon management for high performance solar cells
    Zhu, J.; Yu, Z.; Fan, S.; Cui, Y.