AUTHORISED BOTTLERS AND CANNERS OF COCACOLA PLACE FLOORING CONTRACTS WITH ACALOR

AUTHORISED BOTTLERS AND CANNERS OF COCACOLA PLACE FLOORING CONTRACTS WITH ACALOR 10 ANTI-CORROSION March 1974 AUTHORISED BOTTLERS AND CANNERS OF COCA-COLA PLACE FLOORING CONTRACTS WITH ACALOR ning area, an area of approximately 500 sq. yds. has been laid with Hasle buff tiles to floating floor technique with Acalor No . 6 epoxy resin bonding cement. I n addition to the work at this plant in England, Acalor has laid floor tiles at Saccone Speed Ltd., the bottlers of Coca- Cola in Gibralter. It was here that the contract was for laying in the syrup room, bottling areas, laboratories and staircases Hoganas Model 500 yellow floor tiles, to floating floor tech­ nique and Acalor No. 8 plastic adhesive, which is an imper­ meable bedding cement for bricks and tiles. Pointing was in Acalor No. 6 bonding cement. In Jersey at Les Riches, rue des Pres Estate, who are auth­ orised bottlers of Coca-Cola, two floors were laid by Acalor. I n the bottling hall, an area of 216 sq. yds. was laid with Hasle buff floor tiles laid in granite dust and cement and pointed with Acalor No. 6. In the syrup room, Wheatly red quarry tiles were laid in an area of 73 sq. yds. Th e Acalor 'Floating Floor Technique' referred to involves the laying of two layers of Visqueen to the sub-floor, including the falls to drains. The tiles are then laid on a thick semi- dry sand and cement bed topped with Acalor No. 8 plastic adhesive, and the joints are filled by pressure gun with Acalor No . 6 impervious chemical resisting cement. This resinous- based cement, which produces a high bond strength to ceramic tiles and other building materials, does not contract on setting and eliminates the possibility of hair cracking in the cement which could allow liquid sugar, glucose and other products which form crystals on cooling, to cause the floor finish rapidly to disintegrate. Sugar, salt and many chemicals when they are hot or in solution are in a liquid state. On cooling they T o achieve the hygiene standards demanded by the modern solidify forming crystals which, because of their rapid growth, food processing the soft drinks bottling industry, floor finishes will cause a floor to lift. It is therefore essential that there are must be impervious to the spillage of corrosive solutions, but no hair cracks or voids in the floor or jointing cement into easy to clean and still possess non-slip properities. Th e necess­ which liquors can perculate. Expansion joints are incorporated ity for achieving and maintaining these standards by the Bott­ in the perimeter of the room and around all fixed points, lers of Coca-Cola in their bottling plants resulted in the plac­ i.e., stanchions, machine bases, etc. This system allows the ing of flooring contracts with Acalor (1948) Ltd., of Crawley, Acalor tiled floor to move independently of the main struc­ Sussex. ture or sub-floor should there be a building movement or Thi s company, with over 25 years of experience in laying thermal shock. This technique allows the Acalor floor to be brick, tile and monolithic flooring, employ only craftsmen laid within 24 hours of the sub-floor being laid as it is not specially selected for their skill in this type of construction necessary to wait for the sub-floor to cure. Any shrinkage of work to produce floors which give complete protection from the sub-floor has no effect on the Acalor floor, the two be­ spillage of corrosive solutions including liquid sugar, glucose, coming completely bonded. fruit juices, syrups and other acidic ingredients used in the bottling industry. Tha t authorised bottlers and canners of Coca-Cola have Flooring at the following plants producing Coca-Cola has awarded flooring contracts in many of their plants to Acalor recently been completed:— (1948) Ltd., of Crawley, Sussex, provides positive proof of their claim to be specialists in the field of anti-corrosive floor­ At Solent Canners, Ltd., Western Docks, Southampton, ing specifications. authorised canners of Coca-Cola, in the syrup room and can­ http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Anti-Corrosion Methods and Materials Emerald Publishing

AUTHORISED BOTTLERS AND CANNERS OF COCACOLA PLACE FLOORING CONTRACTS WITH ACALOR

Anti-Corrosion Methods and Materials, Volume 21 (3): 1 – Mar 1, 1974

Loading next page...
 
/lp/emerald-publishing/authorised-bottlers-and-canners-of-cocacola-place-flooring-contracts-8lhtAw84cI
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0003-5599
DOI
10.1108/eb006942
Publisher site
See Article on Publisher Site

Abstract

10 ANTI-CORROSION March 1974 AUTHORISED BOTTLERS AND CANNERS OF COCA-COLA PLACE FLOORING CONTRACTS WITH ACALOR ning area, an area of approximately 500 sq. yds. has been laid with Hasle buff tiles to floating floor technique with Acalor No . 6 epoxy resin bonding cement. I n addition to the work at this plant in England, Acalor has laid floor tiles at Saccone Speed Ltd., the bottlers of Coca- Cola in Gibralter. It was here that the contract was for laying in the syrup room, bottling areas, laboratories and staircases Hoganas Model 500 yellow floor tiles, to floating floor tech­ nique and Acalor No. 8 plastic adhesive, which is an imper­ meable bedding cement for bricks and tiles. Pointing was in Acalor No. 6 bonding cement. In Jersey at Les Riches, rue des Pres Estate, who are auth­ orised bottlers of Coca-Cola, two floors were laid by Acalor. I n the bottling hall, an area of 216 sq. yds. was laid with Hasle buff floor tiles laid in granite dust and cement and pointed with Acalor No. 6. In the syrup room, Wheatly red quarry tiles were laid in an area of 73 sq. yds. Th e Acalor 'Floating Floor Technique' referred to involves the laying of two layers of Visqueen to the sub-floor, including the falls to drains. The tiles are then laid on a thick semi- dry sand and cement bed topped with Acalor No. 8 plastic adhesive, and the joints are filled by pressure gun with Acalor No . 6 impervious chemical resisting cement. This resinous- based cement, which produces a high bond strength to ceramic tiles and other building materials, does not contract on setting and eliminates the possibility of hair cracking in the cement which could allow liquid sugar, glucose and other products which form crystals on cooling, to cause the floor finish rapidly to disintegrate. Sugar, salt and many chemicals when they are hot or in solution are in a liquid state. On cooling they T o achieve the hygiene standards demanded by the modern solidify forming crystals which, because of their rapid growth, food processing the soft drinks bottling industry, floor finishes will cause a floor to lift. It is therefore essential that there are must be impervious to the spillage of corrosive solutions, but no hair cracks or voids in the floor or jointing cement into easy to clean and still possess non-slip properities. Th e necess­ which liquors can perculate. Expansion joints are incorporated ity for achieving and maintaining these standards by the Bott­ in the perimeter of the room and around all fixed points, lers of Coca-Cola in their bottling plants resulted in the plac­ i.e., stanchions, machine bases, etc. This system allows the ing of flooring contracts with Acalor (1948) Ltd., of Crawley, Acalor tiled floor to move independently of the main struc­ Sussex. ture or sub-floor should there be a building movement or Thi s company, with over 25 years of experience in laying thermal shock. This technique allows the Acalor floor to be brick, tile and monolithic flooring, employ only craftsmen laid within 24 hours of the sub-floor being laid as it is not specially selected for their skill in this type of construction necessary to wait for the sub-floor to cure. Any shrinkage of work to produce floors which give complete protection from the sub-floor has no effect on the Acalor floor, the two be­ spillage of corrosive solutions including liquid sugar, glucose, coming completely bonded. fruit juices, syrups and other acidic ingredients used in the bottling industry. Tha t authorised bottlers and canners of Coca-Cola have Flooring at the following plants producing Coca-Cola has awarded flooring contracts in many of their plants to Acalor recently been completed:— (1948) Ltd., of Crawley, Sussex, provides positive proof of their claim to be specialists in the field of anti-corrosive floor­ At Solent Canners, Ltd., Western Docks, Southampton, ing specifications. authorised canners of Coca-Cola, in the syrup room and can­

Journal

Anti-Corrosion Methods and MaterialsEmerald Publishing

Published: Mar 1, 1974

There are no references for this article.

You’re reading a free preview. Subscribe to read the entire article.


DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create folders to
organize your research

Export folders, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off