Access the full text.
Sign up today, get DeepDyve free for 14 days.
G. Luth (2000)
Chronology and Context of the Hyatt Regency CollapseJournal of Performance of Constructed Facilities, 14
R. Venturi, V. Scully (1977)
Complexity and Contradiction in Architecture
H. Petroski, W. Hall, O. Holmes (1985)
To Engineer is HumanJournal of Vibration and Acoustics-transactions of The Asme, 109
B.D. Ilozor, M.I. Okoroh, V. Hardy
Facilities management: the interface with built environment design and construction
D. Kaminetzky, K. Carper (1991)
Design and Construction Failures: Lessons from Forensic Investigations
B. Ilozor, M. Okoroh, C. Egbu, Archicentre (2004)
Understanding residential house defects in Australia from the State of VictoriaBuilding and Environment, 39
Per-Erik Josephson, Yngve Hammarlund (1999)
The causes and costs of defects in construction. A study of seven building projectsAutomation in Construction, 8
Jim Georgiou (2000)
Comparison of defects in houses constructed by owners and registered builders in Victoria 1988-1996
W. Porteous (1985)
Perceived Characteristics of Building FailureA Survey of the Recent LiteratureArchitectural Science Review
Jon Robinson (1987)
The incidence and rectification of faults in residential buildings in Melbourne
W. Ransom (1981)
Building Failures: Diagnosis and avoidance
D.G. Cotts
The Facility Management Handbook
Darren Dalcher, Colin Tully (2002)
Learning from FailuresSoftw. Process. Improv. Pract., 7
A. Leaman, B. Bordass (1993)
Building Design, Complexity and ManageabilityFacilities, 11
J. Wood (1999)
Applying lessons from failures to management and design
J. Rousseau, D. Hazleden
Survey of Building Envelope Failures in the Coastal Climate of British Columbia
H. Andersen (1998)
Motives for Investments in Housing Rehabilitation among Private Landlords under Rent ControlHousing Studies, 13
W. Porteous (1992)
Identification, Evaluation, and Classification of Building Failures
P. Moncarz, Robert Taylor (2000)
Engineering Process Failure—Hyatt Walkway CollapseJournal of Performance of Constructed Facilities, 14
Jim Georgiou, P. Love, Jim Smith (1999)
A comparison of defects in houses constructed by owners and registered builders in the Australian State of VictoriaStructural Survey, 17
B. Ilozor (2003)
Exploring Facilities ManagementJournal of Performance of Constructed Facilities, 17
David Cotts, Kathy Roper, Richard Payant (1992)
ファシリティマネジメントハンドブック = The facility management handbook
B. Ilozor, M. Okoroh, C. Egbu (2003)
Australia's residential building faults : a view from the state of Victoria
S. Pfatteicher (2000)
“The Hyatt Horror”: Failure and Responsibility in American EngineeringJournal of Performance of Constructed Facilities, 14
Jack Gillum (2000)
The Engineer of Record and Design ResponsibilityJournal of Performance of Constructed Facilities, 14
D. Nicastro (1997)
Failure Mechanisms in Building Construction
Purpose – This paper aims to identify and discuss those architectural and building features associated with certain faults and defects, and by implication, impact preservation of buildings' structural and fabrics integrity. Design/methodology/approach – Building condition survey and analysis was conducted. Findings – It was observed that the differing structural and fabrics integrity of these buildings overtime was connected most significantly to their different roofing styles and features. Research limitations/implications – Investigation was limited to two distinct buildings located on the same block at Hampton University, Virginia, USA. Practical implications – This finding underscores the importance of choosing and designing features of buildings with their operation, maintainability, and life‐cycle preservation in mind, if structural and fabrics integrity must be maintained, and sustainability achieved, while restoration dollars are saved. Originality/value – Ilozor et al. 's building defects cause‐effects model was applied in understanding the contributions of various architectural and building features to certain faults, defects or failures that impact the preservation of buildings' structural and fabrics integrity.
Journal of Engineering Design and Technology – Emerald Publishing
Published: Mar 28, 2008
Keywords: Design; Buildings; Construction works; Maintenance
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.