Access the full text.
Sign up today, get DeepDyve free for 14 days.
(2007)
A computational analysis of mine blast survivability of a commercial vehicle structure
(2008)
User documentation
H. Pacejka (1982)
Tire and Vehicle Dynamics
Gary Walker, Anne Kubisch (2020)
A Work in ProgressLet the People Rule
(2006)
Finite element modeling of tires on snow
D. Goldberg (1988)
Genetic Algorithms in Search Optimization and Machine Learning
(1984)
Vehicle terrain mechanics
(2008)
Magic formula tire model with transient properties. Supplement to Vehicle System Dynamics
M. Bekker (1956)
Theory of land locomotion
(2002)
Tire and vehicle dynamics, Butterworth-Heinemann
E. Arons, S. Colbeck (1995)
Geometry of heat and mass transfer in dry snow: A review of theory and experimentReviews of Geophysics, 33
M. Grujicic, W. Bell, G. Arakere, I. Haque (2009)
Finite element analysis of the effect of up-armouring on the off-road braking and sharp-turn performance of a high-mobility multi-purpose wheeled vehicleProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 223
H. Pacejka, Ijm Besselink (1997)
Magic Formula Tyre Model with Transient PropertiesVehicle System Dynamics, 27
(1960)
Off-road locomotion. The University of
(1992)
Society of Automotive Engineers
M. Grujicic, G. Arakere, W.C. Bell, I. Haque
Computational investigation of the effect of up‐armoring on occupant injury/fatality reduction of a prototypical high‐mobility multi‐purpose wheeled vehicle subjected to mine‐blast
M. Bekker (1969)
Introduction to Terrain-Vehicle Systems
M. Grujicic, W. Bell (2011)
A computational analysis of survivability of a pick‐up truck subjected to mine detonation loadsMultidiscipline Modeling in Materials and Structures, 7
H. Pacejka (1966)
The wheel shimmy phenomenon: a theoretical and experimental investigation with particular reference to the non-linear problem
SAE
SAE Glossary of Automotive Terms
S. Clark (1971)
MECHANICS OF PNEUMATIC TIRES
T. Neff, B. Beard, H. Kiem (1997)
Survival of the Fittest
(2008)
ABAQUS Version 6.8.1, User Documentation
M. Grujicic, B. Pandurangan, I. Haque, B. Cheeseman, W. Roy, R. Skaggs (2007)
Computational Analysis of Mine Blast on a Commercial Vehicle StructureMultidiscipline Modeling in Materials and Structures, 3
(1981)
Mechanics of Pneumatic Tires, US Department of Transportation
S. Shoop (2001)
FINITE ELEMENT MODELING OF TIRE-TERRAIN INTERACTION
M. Grujicic, G. Arakere, W. Bell, I. Haque (2009)
Computational investigation of the effect of up-armouring on the reduction in occupant injury or fatality in a prototypical high-mobility multi-purpose wheeled vehicle subjected to mine blastProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 223
D. Goldberg (1989)
Genetic Algorithms in Search
(2001)
Finite element modeling of tire-terrain interaction”, CRREL Technical Report, ERDC/CRREL TR-01-16
(1989)
Terramechanics and off-road vehicles. Elsevier
(2007)
Modeling and simulation of in-plane and out-of-plane forces of pneumatic tires on fresh snow based on the finite element method
(1969)
Introduction to terrain-vehicle systems. The University of
Intec
SIMPACK Version 8900, User Documentation
S. Shoop, K. Kestler, R. Haehnel (2006)
Finite Element Modeling of Tires on Snow2Tire Science and Technology, 34
M. Bekker (1960)
Off-the-road locomotion
(1956)
Theory of land locomotion. The University of
H.B. Pacejka
The wheel shimmy phenomenom: a theoretical and experimental investigation with particular reference to the nonlinear problem (analysis of shimmy in pneumatic tires due to lateral flexibility for stationary and non‐stationary conditions)
G. Bekker
Off‐road Locomotion
J. Wong (1989)
Terramechanics and off-road vehicles
Purpose – The purpose of this paper is to carry out a series of transient, non‐linear dynamics finite element analyses in order to investigate the interactions between a stereotypical pneumatic tire and sand during off‐road vehicle travel. Design/methodology/approach – The interactions were considered under different combined conditions of the longitudinal and lateral slip as encountered during “brake‐and‐turn” and “drive‐and‐turn” vehicle maneuvers. Different components of the pneumatic tire were modeled using elastic, hyper‐ and visco‐elastic material models (with rebar reinforcements), while sand was modeled using the CU‐ARL sand models developed by Grujicic et al. The analyses were used to obtain functional relations between the wheel vertical load, wheel sinkage, tire deflection, (gross) traction, motion resistance and the (net) drawbar pull. These relations were next combined with Pacejka magic formula for a pneumatic tire/non‐deformable road interaction to construct a tire/sand interaction model suitable for use in multi‐body dynamics analysis of the off‐road vehicle performance. Findings – To rationalize the observed traction and motion resistance relations, a close examination of the distribution of the normal and shear contact stresses within the tire/sand contact patch is carried out and the results were found to be consistent with the experimental counter parts. Originality/value – The paper offers insights into the interactions between a stereotypical pneumatic tire and sand during off‐road vehicle travel.
Multidiscipline Modeling in Materials and Structures – Emerald Publishing
Published: Aug 6, 2010
Keywords: Finite element analysis; Road vehicles
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.