Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A chunk-based slicer for cooperative 3D printing

A chunk-based slicer for cooperative 3D printing The purpose of this research is to develop a new slicing scheme for the emerging cooperative three-dimensional (3D) printing platform that has multiple mobile 3D printers working together on one print job.Design/methodology/approachBecause the traditional lay-based slicing scheme does not work for cooperative 3D printing, a chunk-based slicing scheme is proposed to split the print job into chunks so that different mobile printers can print different chunks simultaneously without interfering with each other.FindingsA chunk-based slicer is developed for two mobile 3D printers to work together cooperatively. A simulator environment is developed to validate the developed slicer, which shows the chunk-based slicer working effectively, and demonstrates the promise of cooperative 3D printing.Research limitations/implicationsFor simplicity, this research only considered the case of two mobile 3D printers working together. Future research is needed for a slicing and scheduling scheme that can work with thousands of mobile 3D printers.Practical implicationsThe research findings in this work demonstrate a new approach to 3D printing. By enabling multiple mobile 3D printers working together, the printing speed can be significantly increased and the printing capability (for multiple materials and multiple components) can be greatly enhanced.Social implicationsThe chunk-based slicing algorithm is critical to the success of cooperative 3D printing, which may enable an autonomous factory equipped with a swarm of autonomous mobile 3D printers and mobile robots for autonomous manufacturing and assembly.Originality/valueThis work presents a new approach to 3D printing. Instead of printing layer by layer, each mobile 3D printer will print one chunk at a time, which provides the much-needed scalability for 3D printing to print large-sized object and increase the printing speed. The chunk-based approach keeps the 3D printing local and avoids the large temperature gradient and associated internal stress as the size of the print increases. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Rapid Prototyping Journal Emerald Publishing

A chunk-based slicer for cooperative 3D printing

McPherson, Jace; Zhou, Wenchao
Rapid Prototyping Journal , Volume 24 (9): 11 – Nov 21, 2018
Download PDF
11 pages

Loading next page...
 
/lp/emerald-publishing/a-chunk-based-slicer-for-cooperative-3d-printing-RZXQMFuedG
Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
1355-2546
DOI
10.1108/rpj-07-2017-0150
Publisher site
See Article on Publisher Site

Abstract

The purpose of this research is to develop a new slicing scheme for the emerging cooperative three-dimensional (3D) printing platform that has multiple mobile 3D printers working together on one print job.Design/methodology/approachBecause the traditional lay-based slicing scheme does not work for cooperative 3D printing, a chunk-based slicing scheme is proposed to split the print job into chunks so that different mobile printers can print different chunks simultaneously without interfering with each other.FindingsA chunk-based slicer is developed for two mobile 3D printers to work together cooperatively. A simulator environment is developed to validate the developed slicer, which shows the chunk-based slicer working effectively, and demonstrates the promise of cooperative 3D printing.Research limitations/implicationsFor simplicity, this research only considered the case of two mobile 3D printers working together. Future research is needed for a slicing and scheduling scheme that can work with thousands of mobile 3D printers.Practical implicationsThe research findings in this work demonstrate a new approach to 3D printing. By enabling multiple mobile 3D printers working together, the printing speed can be significantly increased and the printing capability (for multiple materials and multiple components) can be greatly enhanced.Social implicationsThe chunk-based slicing algorithm is critical to the success of cooperative 3D printing, which may enable an autonomous factory equipped with a swarm of autonomous mobile 3D printers and mobile robots for autonomous manufacturing and assembly.Originality/valueThis work presents a new approach to 3D printing. Instead of printing layer by layer, each mobile 3D printer will print one chunk at a time, which provides the much-needed scalability for 3D printing to print large-sized object and increase the printing speed. The chunk-based approach keeps the 3D printing local and avoids the large temperature gradient and associated internal stress as the size of the print increases.

Journal

Rapid Prototyping Journal – Emerald Publishing

Published: Nov 21, 2018

Keywords: Chunk-based slicing; Cooperative 3D printing; Mobile 3D printing; Swarm 3D printing

References

  • Standard terminology for additive manufacturing technologies
  • Cura (software)
    Braam, D.
  • Ubersim: a realistic simulation engine for robot soccer
    Browning, B.; Tryzelaar, E.
  • An efficient curvature-based partitioning of large-scale STL models
    Hao, J.; Fang, L.; Williams, R.E.
  • Simbad: an autonomous robot simulation package for education and research
    Hugues, L.; Bredeche, N.
  • A parallel slicing algorithm for solid freeform fabrication processes
    Kirschman, C.; Jara-Almonte, C.
  • Design and use paradigms for gazebo, an open-source multi-robot simulator
    Koenig, N.; Howard, A.
  • IceSL: a GPU accelerated CSG modeler and slicer
    Lefebvre, S.; Grand-Est, L.I.N.
  • Chopper: partitioning models into 3D-printable parts
    Linjie, L.; Ilya, B.; Szymon, R.; Wojciech, M.
  • Slic3r: G-code generator for 3D printers
    Ranellucci, A.
  • Repetier-Host
  • Adaptive slicing using stepwise uniform refinement
    Sabourin, E.; Houser, S.A.; Helge Bøhn, J.
  • Skeleton-sectional structural analysis for 3D printing
    Xu, W.P.; Li, W.; Liu, L.G.