International Journal of Fatigue 110 (2018) 10–21 Contents lists available at ScienceDirect International Journal of Fatigue journal homepage: www.elsevier.com/locate/ijfatigue a, a,b b a a T. Klotz , D. Delbergue , P. Bocher , M. Lévesque , M. Brochu Département de génie mécanique, École Polytechnique de Montréal, Qc H3T 1J4 Montréal, Canada Département de génie mécanique, École de Technologie Supérieure, Qc H3C 1K3 Montréal, Canada ARTICLE I NFO ABSTRACT Keywords: Shot peening is commonly used in the aerospace industry to improve mechanical components fatigue life. It Inconel 718 introduces compressive residual stresses and cold work at the surface which tend to close short fatigue cracks Fatigue and delay their propagation, respectively. However, shot peening also creates surface irregularities that can be Crack initiation detrimental to fatigue. The eﬀect of diﬀerent shot peening conditions on Inconel 718 tested in low and high cycle Shot peening fatigue is presented in this study. An analysis of the fatigue life, crack initiation mechanisms, residual stress Residual stresses relaxation relaxation, process induced strain hardening and surface roughness showed that, in high cycle fatigue, shot peening can increase Inconel 718 fatigue life from 2 to 20 times, depending on the shot peening conditions. This observation suggests
International Journal of Fatigue – Elsevier
Published: May 1, 2018
It’s your single place to instantly
discover and read the research
that matters to you.
Enjoy affordable access to
over 12 million articles from more than
10,000 peer-reviewed journals.
All for just $49/month
It’s easy to organize your research with our built-in tools.
All the latest content is available, no embargo periods.
“Whoa! It’s like Spotify but for academic articles.”@Phil_Robichaud