Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!
Flash sintering has recently been used to sinter various bulk ceramics under reduced sintering temperatures and sintering time by applying an electric field across the sample. In this work, we have ...
single‐phase bulk ceramic with a homemade flash sintering setup. A constant DC electrical field of ∼80 V/cm and pressure of ∼14 MPa at room temperature triggered flash sintering without pre‐heating ...
a viewpoint of sintering temperature , soaking time and further the physical phenomena. The flash -sintering is a technique that green compacts were heating under application of high electric field . When furnace ...
and evolution of this storm. The first six observed lightning flashes were all negative cloud-to-ground (CG) flashes , after which intracloud (IC) flashes also occurred between middle and upper levels of the storm ...
detection network (Zeus) in Europe, is presented. Cloud systems are defined in the IR temperature array by the 255 K isotherm. Bulk parametrizations that relate cloud top IR temperature , morphological ...
, showing that the sample flash sintered at 800 °C/5 min had lower bulk resistivity than the sample conventionally sintered at 800 °C/8 h. The surfaces of the sintered pellets were observed ...
took place outside the field of view of this instrument. So, we could not derive the temperature of the impact flash by comparing the energy flux density measured in the luminous and the I ranges ...
, thereby improving the understanding of patterns of climate dynamics. In this context the paper presents the numerical and field experimental results of temperature and moisture evolution, which were ...
Abstract Light-induced damage to photosystem I (PSI) was studied during low-light illumination of barley (Hordeum vulgare L.) at chilling temperatures . A 4-h illumination period induced a significant ...
; flash -freeze in liquid nitrogen after blotting and rinsing in PBS Store at 77 K (−196 °C) No 77 K (−196 °C) Tissue at room temperature changes rapidly; freezing should be done in the ORc as soon ...
Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!