Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

The ability of debris, heavily freighted with coarse clastic materials, to flow on gentle slopes

The ability of debris, heavily freighted with coarse clastic materials, to flow on gentle slopes ABSTRACT Observations of many debris‐flow deposits on gently‐sloping alluvial fans have disclosed that debris commonly is heavily loaded with coarse clastic material and contains large isolated blocks. The paper describes how debris charged with coarse granular material can transport large blocks, yet flow on gentle slopes. Experimental results of mixing sand‐sized particles with a slurry of clay plus water indicate that 45–55 vol. % of a single size, and up to 64% of two selected sizes, can be added before interlocking occurs. Theoretical analysis of multi‐size classes suggest that 89 to more than 95 vol. % debris can be clastic materials without significant particle interlocking. The clay fraction, even if minor, plays a critical role in determining strength properties of debris. The mixture of clay plus water provides a cohesive slurry that supports fine‐grained particles within the debris, as well as reduces the effective normal stresses between the particles. The increased unit weight of the clay plus water plus fine‐grained particles allows the support of coarser grained particles. The pyramiding upon the clay‐water slurry continues until the entire debris mass is supported in a virtually frictionless position because of the reduced effective normal stress and the lack of particle interlocking. Thus, the ability of debris flows to support large blocks can be understood in terms of the high unit weight of the displaced debris plus the strength of the fluid phase; that is, the blocks float in the debris as a result of a small density difference between the blocks and the debris, plus the cohesive strength of the clay‐water slurry. Also, the ability of coarse clastic debris to flow on gentle slopes probably is a result of poor sorting of debris‐flow materials which contain minor amounts of clay. The poor sorting allows the debris to have a high density yet have essentially no interlocking of clasts. The high density of the debris reduces effective normal stresses between clasts, thereby reducing apparent friction of the mixture. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Sedimentology Wiley

The ability of debris, heavily freighted with coarse clastic materials, to flow on gentle slopes

Sedimentology , Volume 23 (2) – Apr 1, 1976

Loading next page...
 
/lp/wiley/the-ability-of-debris-heavily-freighted-with-coarse-clastic-materials-zOgw0K6XtP

References (31)

Publisher
Wiley
Copyright
Copyright © 1976 Wiley Subscription Services, Inc., A Wiley Company
ISSN
0037-0746
eISSN
1365-3091
DOI
10.1111/j.1365-3091.1976.tb00047.x
Publisher site
See Article on Publisher Site

Abstract

ABSTRACT Observations of many debris‐flow deposits on gently‐sloping alluvial fans have disclosed that debris commonly is heavily loaded with coarse clastic material and contains large isolated blocks. The paper describes how debris charged with coarse granular material can transport large blocks, yet flow on gentle slopes. Experimental results of mixing sand‐sized particles with a slurry of clay plus water indicate that 45–55 vol. % of a single size, and up to 64% of two selected sizes, can be added before interlocking occurs. Theoretical analysis of multi‐size classes suggest that 89 to more than 95 vol. % debris can be clastic materials without significant particle interlocking. The clay fraction, even if minor, plays a critical role in determining strength properties of debris. The mixture of clay plus water provides a cohesive slurry that supports fine‐grained particles within the debris, as well as reduces the effective normal stresses between the particles. The increased unit weight of the clay plus water plus fine‐grained particles allows the support of coarser grained particles. The pyramiding upon the clay‐water slurry continues until the entire debris mass is supported in a virtually frictionless position because of the reduced effective normal stress and the lack of particle interlocking. Thus, the ability of debris flows to support large blocks can be understood in terms of the high unit weight of the displaced debris plus the strength of the fluid phase; that is, the blocks float in the debris as a result of a small density difference between the blocks and the debris, plus the cohesive strength of the clay‐water slurry. Also, the ability of coarse clastic debris to flow on gentle slopes probably is a result of poor sorting of debris‐flow materials which contain minor amounts of clay. The poor sorting allows the debris to have a high density yet have essentially no interlocking of clasts. The high density of the debris reduces effective normal stresses between clasts, thereby reducing apparent friction of the mixture.

Journal

SedimentologyWiley

Published: Apr 1, 1976

There are no references for this article.