Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Time‐domain simulation of power transients in Raman fibre amplifiers

Time‐domain simulation of power transients in Raman fibre amplifiers We study power transients in Raman fibre amplifiers (RFA). Transients are defined as the output signal power response to abrupt change in the number of signal channels at the input to the RFA (channel addition/removal). The simulations are based on application of a large signal numerical model which incorporates time variation effects, downstream propagation of multiple signals, upstream propagation of pump and both downstream and upstream propagation of amplified spontaneous emission (ASE). System of coupled non‐linear differential equations describing the propagation of the signal, pump and ASE waves along the RFA and their evolution in time represents a two‐boundary value problem. Due to the backward propagating ASE and counter‐directional pumping, an iterative forward and backward solution of propagation equations must be used in order to achieve a steady‐state distribution of signals, pumps, and ASE powers along the RFA. We have used either the fourth‐order Runge–Kutta routine, or an alternative average power analysis (APA) approach to obtain the steady‐state optical power distribution along the fibre. Direct integration is used to obtain time evolution of optical powers as a response to channel addition/removal. Stability of the numerical solution depends on the relation of discretization steps in space and time. Gain locking of the RFA via electronic feedforward pump control derived from a monitoring channel output power has been introduced in the model to study the possibility of suppressing the surviving channel power fluctuations. Copyright © 2004 John Wiley & Sons, Ltd. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png International Journal of Numerical Modelling: Electronic Networks, Devices and Fields Wiley

Loading next page...
 
/lp/wiley/time-domain-simulation-of-power-transients-in-raman-fibre-amplifiers-oI9h4VxHVE

References (12)

Publisher
Wiley
Copyright
Copyright © 2004 John Wiley & Sons, Ltd.
ISSN
0894-3370
eISSN
1099-1204
DOI
10.1002/jnm.531
Publisher site
See Article on Publisher Site

Abstract

We study power transients in Raman fibre amplifiers (RFA). Transients are defined as the output signal power response to abrupt change in the number of signal channels at the input to the RFA (channel addition/removal). The simulations are based on application of a large signal numerical model which incorporates time variation effects, downstream propagation of multiple signals, upstream propagation of pump and both downstream and upstream propagation of amplified spontaneous emission (ASE). System of coupled non‐linear differential equations describing the propagation of the signal, pump and ASE waves along the RFA and their evolution in time represents a two‐boundary value problem. Due to the backward propagating ASE and counter‐directional pumping, an iterative forward and backward solution of propagation equations must be used in order to achieve a steady‐state distribution of signals, pumps, and ASE powers along the RFA. We have used either the fourth‐order Runge–Kutta routine, or an alternative average power analysis (APA) approach to obtain the steady‐state optical power distribution along the fibre. Direct integration is used to obtain time evolution of optical powers as a response to channel addition/removal. Stability of the numerical solution depends on the relation of discretization steps in space and time. Gain locking of the RFA via electronic feedforward pump control derived from a monitoring channel output power has been introduced in the model to study the possibility of suppressing the surviving channel power fluctuations. Copyright © 2004 John Wiley & Sons, Ltd.

Journal

International Journal of Numerical Modelling: Electronic Networks, Devices and FieldsWiley

Published: Mar 1, 2004

There are no references for this article.