Access the full text.
Sign up today, get DeepDyve free for 14 days.
P. Dickens, R. Stangroom, M. Greul, B. Holmer, K. Hon, R. Hovtun, R. Neumann, S. Noeken, D. Wimpenny (1995)
Conversion of RP models to investment castingsRapid Prototyping Journal, 1
J. Singh, Ravendra Singh (2009)
Investigations for a statistically controlled rapid casting solution of lead alloys using three-dimensional printingProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223
K. Dotchev, S. Soe (2006)
Rapid manufacturing of patterns for investment casting: improvement of quality and success rateRapid Prototyping Journal, 12
Rupinder Singh, M. Verma, Guru Nānak (2008)
Investigations for deducing wall thickness of aluminium shell casting using three dimensional printingJournal of achievements in materials and manufacturing engineering, 31
J. Ferreira, A. Mateus, N. Alves (2007)
Rapid tooling aided by reverse engineering to manufacture EDM electrodesThe International Journal of Advanced Manufacturing Technology, 34
D. Dimitrov, K. Schreve, N. Beer (2006)
Advances in three dimensional printing – state of the art and future perspectivesRapid Prototyping Journal, 12
Steve Upcraft, Richard Fletcher (2003)
The rapid prototyping technologiesAssembly Automation, 23
D. Dutta, F. Prinz, D. Rosen, L. Weiss (2001)
Layered Manufacturing: Current Status and Future TrendsJ. Comput. Inf. Sci. Eng., 1
M. Kaplas, Ravendra Singh (2008)
Experimental investigations for reducing wall thickness in zinc shell casting using three-dimensional printingProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222
Jianli Song, Yongtang Li, Q. Deng, D. Hu (2007)
Rapid prototyping manufacturing of silica sand patterns based on selective laser sinteringJournal of Materials Processing Technology, 187
Ravendra Singh, J. Singh (2009)
Comparison of rapid casting solutions for lead and brass alloys using three-dimensional printingProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223
J. Stampfl, R. Liska (2005)
New Materials for Rapid Prototyping ApplicationsMacromolecular Chemistry and Physics, 206
Dongxing Wang, H. Leng, S. Chen (2007)
Recent advances in colour rapid prototypingInternational Journal of Precision Technology, 1
M. Violante, L. Iuliano, P. Minetola (2007)
Design and production of fixtures for free‐form components using selective laser sinteringRapid Prototyping Journal, 13
K. Chockalingam, N. Jawahar, K. Ramanathan, P. Banerjee (2006)
Optimization of stereolithography process parameters for part strength using design of experimentsThe International Journal of Advanced Manufacturing Technology, 29
E. Bassoli, A. Gatto, L. Iuliano, M. Violante (2007)
3D Printing technique applied to Rapid CastingRapid Prototyping Journal, 13
J. Ferreira (2004)
Manufacturing core-boxes for foundry with rapid tooling technologyJournal of Materials Processing Technology, 155
Jack Zhou, Daniel Herscovici, Calvin Chen (2000)
PARAMETRIC PROCESS OPTIMIZATION TO IMPROVE THE ACCURACY OF RAPID PROTOTYPED STEREOLITHOGRAPHY PARTSInternational Journal of Machine Tools & Manufacture, 40
N. Karapatis, J. Griethuysen, R. Glardon (1998)
Direct rapid tooling: a review of current researchRapid Prototyping Journal, 4
T. Wohlers (1995)
Future potential of rapid prototyping and manufacturing around the worldRapid Prototyping Journal, 1
Kevin Jurrens (1999)
Standards for the rapid prototyping industryRapid Prototyping Journal, 5
J. Barlow, J. Beaman, Badrinarayan Balasubramanian (1996)
A rapid mould‐making system: material properties and design considerationsRapid Prototyping Journal, 2
Rapid prototyping (RP) has been in evidence for the past 20 years and is being widely used in diverse areas, from the building of aesthetic and functional prototypes to the production of tools and moulds for technological prototypes. Among various RP techniques, three dimensional printing (3DP) is a relatively new form of RP. The present research paper provides an overview of RP process and specifically 3DP for shell patterns obtained from ceramic shells that can be built and then joined (as in the conventional process) to obtain the cavity for pouring metal for generation of cost effective prototypes for casting applications.
International Journal of Precision Technology – Inderscience Publishers
Published: Jan 1, 2011
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.