Access the full text.
Sign up today, get DeepDyve free for 14 days.
P. John, S. Prasad, A. Voevodin, J. Zabinski (1998)
Calcium sulfate as a high temperature solid lubricantWear, 219
S. Gupta, D. Filimonov, T. Palanisamy, T. El-Raghy, M. Barsoum (2007)
Ta2AlC and Cr2AlC Ag-based composites—New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and aluminaWear, 262
M. Hilton, P. Fleischauer (1992)
Applications of solid lubricant films in spacecraftSurface & Coatings Technology
M. Gardos, H. Hong, W. Winer (1990)
The Effect of Anion Vacancies on the Tribological Properties of Rutile (TiO2-x), Part II: Experimental EvidenceTribology Transactions, 33
P. Mayrhofer, P. Hovsepian, C. Mitterer, W. Münz (2004)
Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatingsSurface & Coatings Technology, 177
S. Vepřek, A. Argon (2001)
Mechanical properties of superhard nanocompositesSurface & Coatings Technology, 146
B. Yen, B. Schwickert, M. Toney (2004)
Origin of low-friction behavior in graphite investigated by surface x-ray diffractionApplied Physics Letters, 84
M.B.Peterson (2009)
Wear-resisting Oxide Films for 900℃Journal of Materials Science & Technology, 13
Hirano, Shinjo, Kaneko, Murata (1991)
Anisotropy of frictional forces in muscovite mica.Physical review letters, 67 19
L. Gschwender, C. Snyder, L. Nelson, G. Fultz, C. Saba (2001)
Advanced High-Temperature Air Force Turbine Engine Oil Program
M. Hamilton, Luis Alvarez, Nathan Mauntler, N. Argibay, R. Colbert, D. Burris, C. Muratore, A. Voevodin, S. Perry, W. Sawyer (2008)
A Possible Link Between Macroscopic Wear and Temperature Dependent Friction Behaviors of MoS2 CoatingsTribology Letters, 32
J. Spirko, M. Neiman, A. Oelker, K. Klier (2003)
Electronic structure and reactivity of defect MoS2: I. Relative stabilities of clusters and edges, and electronic surface statesSurface Science, 542
H. Köstenbauer, G. Fontalvo, C. Mitterer, J. Keckes (2008)
Tribological Properties of TiN/Ag Nanocomposite CoatingsTribology Letters, 30
K. Wahl, I. Singer (1995)
Quantification of a lubricant transfer process that enhances the sliding life of a MoS2 coatingTribology Letters, 1
C. Muratore, A. Voevodin, Jianjun Hu, J. Zabinski (2006)
Tribology of adaptive nanocomposite yttria-stabilized zirconia coatings containing silver and molybdenum from 25 to 700 °CWear, 261
P. Mayrhofer, A. Hörling, L. Karlsson, J. Sjoelen, T. Larsson, C. Mitterer, L. Hultman (2003)
Self-organized nanostructures in the Ti–Al–N systemApplied Physics Letters, 83
M. Dienwiebel, G. Verhoeven, N. Pradeep, J. Frenken, J. Heimberg, H. Zandbergen (2004)
Superlubricity of graphite.Physical review letters, 92 12
Jianjun Hu, R. Wheeler, J. Zabinski, Paul Shade, A. Shiveley, A. Voevodin (2008)
Transmission Electron Microscopy Analysis of Mo–W–S–Se Film Sliding Contact Obtained by Using Focused Ion Beam Microscope and In Situ MicrotribometerTribology Letters, 32
W. Clark, J. Lancaster (1963)
Breakdown and surface fatigue of carbons during repeated slidingWear, 6
A. Voevodin, J. Zabinski, C. Muratore (2005)
Recent Advances in Hard, Tough, and Low Friction Nanocomposite CoatingsTsinghua Science & Technology, 10
S. Miyake, Sadao Takahashi, I. Watanabe, H. Yoshihara (1987)
Friction and Wear Behavior of Hard Carbon FilmsTribology Transactions, 30
H. Sliney, T. Strom, G. Allen (1965)
Fluoride Solid Lubricants for Extreme Temperatures and Corrosive EnvironmentsTribology Transactions, 8
I. Singer, S. Dvorak, K. Wahl, T. Scharf (2003)
Role of third bodies in friction and wear of protective coatingsJournal of Vacuum Science and Technology, 21
P. Niederhäuser, H. Hintermann, M. Maillat (1983)
Moisture-resistant MoS2-based composite lubricant films☆Thin Solid Films, 108
B. Stupp (1981)
Synergistic effects of metals co-sputtered with MoS2Thin Solid Films, 84
J. Wu, D. Rigney, M. Falk, J. Sanders, A. Voevodin, J. Zabinski (2004)
Tribological behavior of WC/DLC/WS2 nanocomposite coatingsSurface & Coatings Technology, 188
W. Sproul (1994)
Multilayer, multicomponent, and multiphase physical vapor deposition coatings for enhanced performanceJournal of Vacuum Science and Technology, 12
P. Fleischauer (1983)
Effects of Crystallite Orientation on Environmental Stability and Lubrication Properties of Sputtered MoS2 Thin FilmsTribology Transactions, 27
A. Voevodin, J. Zabinski (2006)
Laser surface texturing for adaptive solid lubricationWear, 261
H. Sliney (1982)
Solid lubricant materials for high temperatures: A reviewTribology International, 15
J. Zabinski, M. Donley, V. Dyhouse, N. McDevitt (1992)
Chemical and tribological characterization of PbOMoS2 films grown by pulsed laser depositionThin Solid Films, 214
J. Skinner, N. Gane, D. Tabor (1971)
Micro-friction of GraphiteNature, 232
Y. Liu, A. Erdemir, E. Meletis (1996)
An investigation of the relationship between graphitization and frictional behavior of DLC coatingsSurface & Coatings Technology
S. Vepřek (1999)
The search for novel, superhard materialsJournal of Vacuum Science and Technology, 17
J. Martín, H. Pascal, C. Donnet, T. Mogne, J. Loubet, T. Epicier (1994)
Superlubricity of MoS2: crystal orientation mechanismsSurface & Coatings Technology
A. Voevodin, S. Prasad, J. Zabinski (1997)
Nanocrystalline carbide/amorphous carbon compositesJournal of Applied Physics, 82
T. Huu, H. Zaidi, D. Paulmier (1995)
Lubricating properties of diamond-like coatingWear
W. Rüdorff (1941)
Über die Lösung von Brom im Kristallgitter des Graphits, BromgraphitZeitschrift für anorganische und allgemeine Chemie, 245
A. Kolmogorov, V. Crespi (2000)
Smoothest bearings: interlayer sliding in multiwalled carbon nanotubesPhysical review letters, 85 22
F. Bowden, D. Tabor (1964)
The Friction and Lubrication of Solids
A. Erdemir, O. Eryilmaz, G. Fenske (2000)
Synthesis of diamondlike carbon films with superlow friction and wear propertiesJournal of Vacuum Science and Technology, 18
C. Muratore, Jianjun Hu, A. Voevodin (2007)
Adaptive Nanocomposite Coatings with a Titanium Nitride Diffusion Barrier Mask for High-Temperature Tribological ApplicationsThin Solid Films, 515
J. Wu, M. Sanghavi, J. Sanders, A. Voevodin, J. Zabinski, D. Rigney (2003)
Sliding behavior of multifunctional composite coatings based on diamond-like carbonWear, 255
C. Dellacorte (1996)
The effect of counterface on the tribological performance of a high temperature solid lubricant composite from 25 to 650°CSurface & Coatings Technology
K. Wahl, L. Seitzman, R. Bolster, I. Singer (1995)
Low-friction, high-endurance, ion-beam-deposited Pb-Mo-S coatingsSurface & Coatings Technology, 73
M. Chhowalla, G. Amaratunga (2000)
Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wearNature, 407
S. Vepřek, A. Niederhofer, K. Moto, T. Bolom, H.-D. Männling, P. Nesládek, G. Dollinger, A. Bergmaier (2000)
Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV= 80 to ≥ 105 GPaSurface & Coatings Technology, 133134
T. Spalvins (1987)
A review of recent advances in solid film lubricationJournal of Vacuum Science and Technology, 5
C. Mulligan, D. Gall (2005)
CrN-Ag self-lubricating hard coatingsSurface & Coatings Technology, 200
A. Voevodin, A. Phelps, J. Zabinski, M. Donley (1996)
Friction induced phase transformation of pulsed laser deposited diamond-like carbonDiamond and Related Materials, 5
D. Grierson, R. Carpick (2007)
Nanotribology of carbon-based materialsNano Today, 2
C. Mate, G. McClelland, R. Erlandsson, S. Chiang (1987)
Atomic-scale friction of a tungsten tip on a graphite surface.Physical review letters, 59 17
J. Zabinski, M. Donley, S. Walck, T. Schneider, N. McDevitt (1995)
The Effects of Dopants on the Chemistry and Tribology of Sputter-Deposited MoS2 FilmsTribology Transactions, 38
A. Erdemir, C. Donnet (2000)
Tribology of Diamond, Diamond-like Carbon and Related Films
T. Spalvins (1980)
Tribological properties of sputtered MoS2 films in relation to film morphologyThin Solid Films, 73
X. Chu, S. Barnett (1995)
A Model of Superlattice Yield Stress and Hardness EnhancementsMRS Proceedings, 382
S. Walck, J. Zabinski, N. McDevitt, J. Bultman (1997)
Characterization of air-annealed, pulsed laser deposited ZnO-WS2 solid film lubricants by transmission electron microscopyThin Solid Films, 305
C. Collins, F. Davanloo, T. Lee, H. Park, J. You (1993)
Noncrystalline films with the chemistry, bonding, and properties of diamondJournal of Vacuum Science & Technology B, 11
S. Murray, S. Calabrese (1993)
Effect of solid lubricants on low speed sliding behavior of silicon nitride at temperatures to 800°CLubrication Engineering, 49
A. Voevodin, J. Zabinski (2005)
Nanocomposite and nanostructured tribological materials for space applicationsComposites Science and Technology, 65
A. Voevodin, John Jones, J. Zabinski, Z. Czigány, L. Hultman (2002)
Growth and structure of fullerene-like CNx thin films produced by pulsed laser ablation of graphite in nitrogenJournal of Applied Physics, 92
I. Singer, S. Fayeulle, P. Ehni (1996)
Wear behavior of triode-sputtered MoS2 coatings in dry sliding contact with steel and ceramicsWear, 195
G. Rowe (1960)
Some observations on the frictional behaviour of boron nitride and of graphiteWear, 3
T. Scharf, I. Singer (2003)
Thickness of diamond-like carbon coatings quantified with Raman spectroscopyThin Solid Films, 440
A. Voevodin, Jianjun Hu, John Jones, Todd Fitz, J. Zabinski (2001)
Growth and structural characterization of yttria-stabilized zirconia–gold nanocomposite films with improved toughnessThin Solid Films, 401
J. Cuomo, J. Doyle, J. Bruley, Joyce Liu (1991)
Sputter deposition of dense diamond-like carbon films at low temperatureApplied Physics Letters, 58
T. Spalvins (1984)
Frictional and morphological properties of Au-MoS2 films sputtered from a compact targetThin Solid Films, 118
H. Sliney (1986)
The Use of Silver in Self-Lubricating Coatings for Extreme TemperaturesTribology Transactions, 29
O. Eryilmaz, A. Erdemir (2007)
Surface analytical investigation of nearly-frictionless carbon films after tests in dry and humid nitrogenSurface & Coatings Technology, 201
J. Zabinski, J. Bultman, J. Sanders, J. Hu (2006)
Multi-environmental lubrication performance and lubrication mechanism of MoS2/Sb2O3/C composite filmsTribology Letters, 23
V. Buck (1983)
Morphological properties of sputtered MoS2 filmsWear, 91
S. Ghosh, I. Calizo, D. Teweldebrhan, E. Pokatilov, D. Nika, A. Balandin, W. Bao, F. Miao, C. Lau (2008)
PROOF COPY 020815APL Extremely high thermal conductivity of graphene: Prospects for thermal management applications in nanoelectronic circuits
H. Zaidi, T. Huu, D. Paulmier (1994)
Influence of hydrogen contained in hard carbon coatings on their tribological behaviourDiamond and Related Materials, 3
H. Ronkainen, Simo Varjus, J. Koskinen, K. Holmberg (2001)
Differentiating the tribological performance of hydrogenated and hydrogen-free DLC coatingsWear, 249
J. Cuomo, D. Pappas, J. Bruley, J. Doyle, K. Saenger (1991)
Vapor deposition processes for amorphous carbon films with sp3 fractions approaching diamondJournal of Applied Physics, 70
G. Gassner, P. Mayrhofer, K. Kutschej, C. Mitterer, M. Kathrein (2006)
Magnéli phase formation of PVD Mo–N and W–N coatingsSurface & Coatings Technology, 201
M. Peterson, S. Murray, J. Florek (1959)
Consideration of Lubricants for Temperatures above 1000 FTribology Transactions, 2
M. Kato, T. Mori, L. Schwartz (1980)
Hardening by spinodal modulated structureActa Metallurgica, 28
A. Voevodin, Jianjun Hu, Todd Fitz, J. Zabinski (2001)
Tribological properties of adaptive nanocomposite coatings made of yttria stabilized zirconia and goldSurface & Coatings Technology, 146
M. Treacy, T. Ebbesen, J. Gibson (1996)
Exceptionally high Young's modulus observed for individual carbon nanotubesNature, 381
T. Huu, H. Néry, H. Zaidi, D. Paulmier (1994)
Tribological behaviour of hard carbon coatings deposited on steel substrates by plasma-assisted chemical vapour depositionDiamond and Related Materials, 3
A. Cao, P. Dickrell, W. Sawyer, M. Ghasemi-Nejhad, P. Ajayan (2005)
Super-Compressible Foamlike Carbon Nanotube FilmsScience, 310
A. Magnéli (1953)
Structures of the ReO3‐type with recurrent dislocations of atoms: `homologous series' of molybdenum and tungsten oxidesActa Crystallographica, 6
Jianjun Hu, C. Muratore, A. Voevodin (2007)
Silver Diffusion and High-Temperature Lubrication Mechanisms of YSZ–Ag–Mo Based Nanocomposite CoatingsComposites Science and Technology, 67
K. Miyoshi, D. Wheeler, J. Zabinski (1996)
Surface Chemistry, Friction, and Wear Properties of Untreated and Laser-Annealed Surfaces of Pulsed-Laser-Deposited WS(sub 2) Coatings
A. Voevodin, T. Fitz, J. Hu, J. Zabinski (2002)
Nanocomposite tribological coatings with “chameleon” surface adaptationJournal of Vacuum Science and Technology, 20
J. Neidhardt, L. Hultman (2007)
Beyond ?- C3 N4 -Fullerene-like carbon nitride : A promising coating materialJournal of Vacuum Science and Technology, 25
D. Pappas, K. Saenger, J. Bruley, W. Krakow, J. Cuomo, T. Gu, R. Collins (1992)
Pulsed laser deposition of diamond‐like carbon filmsJournal of Applied Physics, 71
A. Voevodin, M. Capano, S. Laube, M. Donley, J. Zabinski (1997)
Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural transitions in Ti–C thin filmsThin Solid Films, 298
R. Arnell, F. Soliman (1978)
The effects of speed, film thickness and substrate surface roughness on the friction and wear of soft metal films in ultrahigh vacuumThin Solid Films, 53
J. Johnson, J. Woodford, D. Rajput, A. Kolesnikov, J. Schleuter, O. Eryilmaz, A. Erdemir (2008)
Carbon-hydrogen bonding in near-frictionless carbonApplied Physics Letters, 93
D. Ramadanoff, Samuel Glass (1944)
High-altitude brush problemElectrical Engineering, 63
M. Todd (1982)
Solid lubrication of ball bearings for spacecraft mechanismsTribology International, 15
C. Muratore, A. Voevodin (2006)
Molybdenum disulfide as a lubricant and catalyst in adaptive nanocomposite coatingsSurface & Coatings Technology, 201
A. Ferrari, J. Robertson (2000)
Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 61
C. Muratore, D. Clarke, John Jones, A. Voevodin (2008)
Smart tribological coatings with wear sensing capabilityWear, 265
O. Knotek, M. Böhmer, T. Leyendecker (1986)
On structure and properties of sputtered Ti and Al based hard compound filmsJournal of Vacuum Science and Technology, 4
K. Kutschej, C. Mitterer, C. Mulligan, D. Gall (2006)
High‐Temperature Tribological Behavior of CrN‐Ag Self‐lubricating CoatingsAdvanced Engineering Materials, 8
E. Roberts, W. Price (1995)
Advances in molybdenum disulphide film technology for space applications
J. Moser, F. Lévy (1993)
Crystal reorientation and wear mechanisms in MoS_2 lubricating thin films investigated by TEMJournal of Materials Research, 8
D. Morelli, C. Beetz, T. Perry (1988)
Thermal conductivity of synthetic diamond filmsJournal of Applied Physics, 64
C. Baker, Jianjun Hu, A. Voevodin (2006)
Preparation of Al2O3/DLC/Au/MoS2 chameleon coatings for space and ambient environmentsSurface & Coatings Technology, 201
H. Holleck, V. Schier (1995)
Multilayer PVD coatings for wear protectionSurface & Coatings Technology
M. Gardos (1988)
The Synergistic Effects of Graphite on the Friction and Wear of MoS2 Films in AirTribology Transactions, 31
V. Lyubimov, A. Voevodin, A. Yerokhin, Y. Timofeev, I. Arkhipov (1992)
Development and testing of multilayer physically vapour deposited coatings for piston ringsSurface & Coatings Technology, 52
A. Jankowski (1988)
Modelling the supermodulus effect in metallic multilayersJournal of Physics F: Metal Physics, 18
J. Mucha, D. Flamm, D. Ibbotson (1989)
On the role of oxygen and hydrogen in diamond-forming dischargesJournal of Applied Physics, 65
R. Fella, H. Holleck, H. Schulz (1988)
Preparation and properties of WC−TiC−TiN gradient coatingsSurface & Coatings Technology, 36
R. Grubbs, S. Prasad, M. Dugger, T. Scharf, R. Goeke, P. Kotula (2006)
Growth, structure, and tribological behavior of atomic layer-deposited tungsten disulphide solid lubricant coatings with applications to MEMSActa Materialia, 54
M. Hilton, R. Bauer, P. Fleischauer (1990)
Tribological performance and deformation of sputter-deposited MoS2 solid lubricant films during sliding wear and indentation contact. Technical report
J. Hu, J. Zabinski, J. Bultman, J. Sanders, A. Voevodin (2006)
Structure characterization of pulsed laser deposited MoSx–WSey composite films of tribological interestsTribology Letters, 24
M. Gardos (1988)
The Effect of Anion Vacancies on the Tribological Properties of Rutile (TiO2–x)Tribology Transactions, 31
S. Berber, Young-Kyun Kwon, D. Tománek (2000)
Unusually high thermal conductivity of carbon nanotubesPhysical review letters, 84 20
M. Gardos (1999)
Tribological fundamentals of polycrystalline diamond filmsSurface & Coatings Technology, 113
A. Merkle, L. Marks (2007)
Friction in full viewApplied Physics Letters, 90
J. Endrino, J. Nainaparampil, J. Krzanowski (2002)
Microstructure and vacuum tribology of TiC–Ag composite coatings deposited by magnetron sputtering-pulsed laser depositionSurface & Coatings Technology, 157
W. Jamison, S. Cosgrove (1971)
Friction Characteristics of Transition-Metal Disulfides and DiselenidesTribology Transactions, 14
A. Voevodin, S. Walck, J. Zabinski (1997)
Architecture of multilayer nanocomposite coatings with super-hard diamond-like carbon layers for wear protection at high contact loadsWear
A. Voevodin, J. O’Neill, J. Zabinski (1999)
WC/DLC/WS2 nanocomposite coatings for aerospace tribologyTribology Letters, 6
J. Koehler (1970)
Attempt to Design a Strong SolidPhysical Review B, 2
S. Vepřek, S. Reiprich (1995)
A concept for the design of novel superhard coatingsThin Solid Films, 268
K. Wahl, L. Seitzman, R. Bolster, I. Singer, M. Peterson (1997)
Ion-beam deposited Cu-Mo coatings as high temperature solid lubricantsSurface & Coatings Technology, 89
H. Sliney, W. Waters, R. Soltis (1997)
MS212--A Homogeneous Sputtered Solid Lubricant Coating for Use to 800 C
A. Erdemir (2000)
A crystal-chemical approach to lubrication by solid oxidesTribology Letters, 8
A. Erdemir (2001)
Solid Lubricants and Self-Lubricating Films
A. Erdemir (2004)
Design criteria for superlubricity in carbon films and related microstructuresTribology International, 37
M. Delplancke-Ogletree, O. Monteiro (1997)
Deposition of titanium carbide films from mixed carbon and titanium plasma streamsJournal of Vacuum Science and Technology, 15
R. Deacon, J. Goodman (1958)
Lubrication by lamellar solidsProceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 243
X. Yun, D. Bogy, C. Bhatia (1997)
Tribochemical Study of Hydrogenated Carbon Coatings With Different Hydrogen Content Levels in Ultra High VacuumJournal of Tribology-transactions of The Asme, 119
A. Voevodin, J. Zabinski (2000)
Supertough wear-resistant coatings with ‘chameleon’ surface adaptationThin Solid Films, 370
Y. Pauleau, P. Juliet, R. Gras (1997)
Friction coefficient and wear rate of sputter-deposited thin films and plasma-sprayed thick coatings at high temperatures in room airWear, 210
A. Voevodin, J. O’Neill, J. Zabinski (1999)
Nanocomposite tribological coatings for aerospace applicationsSurface & Coatings Technology, 116
H. Holleck, H. Schulz (1987)
Advanced layer material constitutionThin Solid Films, 153
S. Aouadi, Y. Paudel, Brandon Luster, S. Stadler, P. Kohli, C. Muratore, C. Hager, A. Voevodin (2008)
Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace ApplicationsTribology Letters, 29
C. Muratore, A. Voevodin (2009)
Control of molybdenum disulfide basal plane orientation during coating growth in pulsed magnetron sputtering dischargesThin Solid Films, 517
L. Palatnik, A. Il’inskii (1964)
Stabilization of High-Strength Vacuum-Deposited Films, 9
W. Gulbiński, T. Suszko (2006)
Thin films of MoO3–Ag2 O binary oxides – the high temperature lubricantsWear, 261
W. Lauwerens, Jihui Wang, J. Navrátil, E. Wieers, J. D’Haen, L. Stals, J. Celis, Y. Bruynseraede (2000)
Humidity resistant MoSx films prepared by pulsed magnetron sputteringSurface & Coatings Technology, 131
C. Donnet, T. Mogne, J. Martín (1993)
Superlow friction of oxygen-free MoS2 coatings in ultrahigh vacuumSurface & Coatings Technology, 62
J. Angus, C. Hayman (1988)
Low-Pressure, Metastable Growth of Diamond and "Diamondlike" PhasesScience, 241
W. Bragg (1928)
An Introduction to Crystal AnalysisNature, 122
C. Muratore, Jianjun Hu, A. Voevodin (2009)
Tribological coatings for lubrication over multiple thermal cyclesSurface & Coatings Technology, 203
I. Singer (1988)
Solid Lubricating Films for Extreme EnvironmentsMRS Proceedings, 140
J. Zabinski, A. Day, M. Donley, C. Dellacorte, N. McDevitt (1994)
Synthesis and characterization of a high-temperature oxide lubricantJournal of Materials Science, 29
H. Sliney (1979)
Wide temperature spectrum self-lubricating coatings prepared by plasma sprayingThin Solid Films, 64
Motohisa Hirano, K. Shinjo (1990)
Atomistic locking and friction.Physical review. B, Condensed matter, 41 17
R. Chromik, C. Baker, A. Voevodin, K. Wahl (2007)
In situ tribometry of solid lubricant nanocomposite coatingsWear, 262
Adaptive nanocomposite coating materials that automatically and reversibly adjust their surface composition and morphology via multiple mechanisms are a promising development for the reduction of friction and wear over broad ranges of ambient conditions encountered in aerospace applications, such as cycling of temperature and atmospheric composition. Materials selection for these composites is based on extensive study of interactions occurring between solid lubricants and their surroundings, especially with novel in situ surface characterization techniques used to identify adaptive behavior on size scales ranging from 10 −10 to 10 −4 m. Recent insights on operative solid-lubricant mechanisms and their dependency upon the ambient environment are reviewed as a basis for a discussion of the state of the art in solid-lubricant materials.
Annual Review of Materials Research – Annual Reviews
Published: Aug 4, 2009
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.