Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A peak in the hydration reaction at the end of the cement induction period

A peak in the hydration reaction at the end of the cement induction period J Mater Sci (2007) 42:1388–1392 DOI 10.1007/s10853-006-1427-3 LETTER A peak in the hydration reaction at the end of the cement induction period J. M. Makar Æ G. W. Chan Æ K. Y. Esseghaier Received: 14 July 2006 / Accepted: 11 December 2006 / Published online: 23 January 2007 Springer Science+Business Media, LLC 2007 Although the hydration of ordinary Portland cement derivative differential thermal analysis [10], while (OPC) and its main constituent, tricalcium silicate derivative methods are also used in other forms of (3CaOSiO or C S), have been studied for many thermal analysis. 2 3 decades [1], some aspects of the hydration process Both pure C S (surface area 0.32 m /g) and OPC remain poorly understood. In particular, there is little samples were hydrated in a Thermometric Tam Air consensus on the mechanisms related to the dormant Isothermal Calorimeter (model 3114) using Accusolv or induction period [2, 3]. The induction period is a (Anachemia, Inc.) water with a maximum impurity time of minimal hydration activity between the initial level of 1 ppm at a water/cement (w/c) ratio of 0.5 hydration reactions upon wetting and the later by mass. All measurements were conducted at a primary tricalcium silicate reaction http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Materials Science Springer Journals

A peak in the hydration reaction at the end of the cement induction period

Makar, J.; Chan, G.; Esseghaier, K.
Journal of Materials Science , Volume 42 (4) – Jan 23, 2007
Download PDF
5 pages

Loading next page...
 
/lp/springer-journals/a-peak-in-the-hydration-reaction-at-the-end-of-the-cement-induction-bIyHQOK0ZV

References (12)

Publisher
Springer Journals
Copyright
Copyright © 2007 by Springer Science+Business Media, LLC
Subject
Materials Science; Materials Science, general; Characterization and Evaluation of Materials; Polymer Sciences; Continuum Mechanics and Mechanics of Materials; Crystallography and Scattering Methods; Classical Mechanics
ISSN
0022-2461
eISSN
1573-4803
DOI
10.1007/s10853-006-1427-3
Publisher site
See Article on Publisher Site

Abstract

J Mater Sci (2007) 42:1388–1392 DOI 10.1007/s10853-006-1427-3 LETTER A peak in the hydration reaction at the end of the cement induction period J. M. Makar Æ G. W. Chan Æ K. Y. Esseghaier Received: 14 July 2006 / Accepted: 11 December 2006 / Published online: 23 January 2007 Springer Science+Business Media, LLC 2007 Although the hydration of ordinary Portland cement derivative differential thermal analysis [10], while (OPC) and its main constituent, tricalcium silicate derivative methods are also used in other forms of (3CaOSiO or C S), have been studied for many thermal analysis. 2 3 decades [1], some aspects of the hydration process Both pure C S (surface area 0.32 m /g) and OPC remain poorly understood. In particular, there is little samples were hydrated in a Thermometric Tam Air consensus on the mechanisms related to the dormant Isothermal Calorimeter (model 3114) using Accusolv or induction period [2, 3]. The induction period is a (Anachemia, Inc.) water with a maximum impurity time of minimal hydration activity between the initial level of 1 ppm at a water/cement (w/c) ratio of 0.5 hydration reactions upon wetting and the later by mass. All measurements were conducted at a primary tricalcium silicate reaction

Journal

Journal of Materials Science – Springer Journals

Published: Jan 23, 2007

There are no references for this article.