Access the full text.
Sign up today, get DeepDyve free for 14 days.
S. Fierro, T. Nagel, H. Baltruschat, C. Comninellis (2007)
Investigation of the oxygen evolution reaction on Ti/IrO2 electrodes using isotope labelling and on-line mass spectrometryElectrochemistry Communications, 9
G. Saracco, L. Solarino, V. Specchia, M. Maja (2001)
Electrolytic abatement of biorefractory organics by combining bulk and electrode oxidation processesChemical Engineering Science, 56
E. Kotta, N. Kalogerakis, D. Mantzavinos (2007)
The effect of solids on the electrochemical treatment of olive mill effluentsJournal of Chemical Technology & Biotechnology, 82
H. Inan, A. Dimoglo, H. Simsek, M. Karpuzcu (2004)
Olive oil mill wastewater treatment by means of electro-coagulationSeparation and Purification Technology, 36
C. Comninellis, A. Nerini (1995)
Anodic oxidation of phenol in the presence of NaCl for wastewater treatmentJournal of Applied Electrochemistry, 25
S. Trasatti (2000)
Electrocatalysis: understanding the success of DSA®Electrochimica Acta, 45
S. Khoufi, H. Aouissaoui, M. Penninckx, S. Sayadi (2004)
Application of electro-Fenton oxidation for the detoxification of olive mill wastewater phenolic compounds.Water science and technology : a journal of the International Association on Water Pollution Research, 49 4
C. Comninellis, C. Pulgarin (1993)
Electrochemical oxidation of phenol for wastewater treatment using SnO2, anodesJournal of Applied Electrochemistry, 23
E. Chatzisymeon, N. Xekoukoulotakis, A. Coz, N. Kalogerakis, D. Mantzavinos (2006)
Electrochemical treatment of textile dyes and dyehouse effluents.Journal of hazardous materials, 137 2
C. Israilides, A. Vlyssides, V. Mourafeti, G. Karvouni (1997)
Olive oil wastewater treatment with the use of an electrolysis systemBioresource Technology, 61
D. Galizzioli, F. Tantardini, S. Trasatti (1974)
Ruthenium dioxide: a new electrode material. I. Behaviour in acid solutions of inert electrolytesJournal of Applied Electrochemistry, 4
M. Panizza, G. Cerisola (2006)
Olive mill wastewater treatment by anodic oxidation with parallel plate electrodes.Water research, 40 6
V. Panić, A. Dekanski, T. Vidaković, V. Mišković‐Stanković, B. Javanović, B. Nikolić (2005)
Oxidation of phenol on RuO2–TiO2/Ti anodesJournal of Solid State Electrochemistry, 9
Marina Gotsi, N. Kalogerakis, E. Psillakis, P. Samaras, D. Mantzavinos (2005)
Electrochemical oxidation of olive oil mill wastewaters.Water research, 39 17
D. Galizzioli, F. Tantardini, S. Trasatti (1975)
Ruthenium dioxide: a new electrode material. II. Non-stoichiometry and energetics of electrode reactions in acid solutionsJournal of Applied Electrochemistry, 5
E. Chatzisymeon, A. Dimou, D. Mantzavinos, A. Katsaounis (2009)
Electrochemical oxidation of model compounds and olive mill wastewater over DSA electrodes: 1. The case of Ti/IrO(2) anode.Journal of hazardous materials, 167 1-3
G. Fóti, C. Comninellis (2004)
Electrochemical Oxidation of Organics on Iridium Oxide and Synthetic Diamond Based Electrodes, 37
Agnieszka Kapałka, G. Fóti, C. Comninellis (2008)
Determination of the Tafel slope for oxygen evolution on boron-doped diamond electrodesElectrochemistry Communications, 10
C. Comninellis, G. Vercesi (1991)
Characterization of DSA®-type oxygen evolving electrodes: Choice of a coatingJournal of Applied Electrochemistry, 21
D. Mantzavinos, Erik Lauer, M. Sahibzada, A. Livingston, I. Metcalfe (2000)
Assessment of partial treatment of polyethylene glycol wastewaters by wet air oxidationWater Research, 34
Agnieszka Kapałka, B. Lanova, H. Baltruschat, G. Fóti, C. Comninellis (2008)
Electrochemically induced mineralization of organics by molecular oxygen on boron-doped diamond electrodeElectrochemistry Communications, 10
Y. Takasu, Norihiro Yoshinaga, W. Sugimoto (2008)
Oxygen reduction behavior of RuO2/Ti, IrO2/Ti and IrM (M : Ru, Mo, W, V) O-x/Ti binary oxide electrodes in a sulfuric acid solutionElectrochemistry Communications, 10
U. Un, S. Ugur, A. Koparal, U. Ogutveren (2006)
Electrocoagulation of olive mill wastewatersSeparation and Purification Technology, 52
G. Saracco, L. Solarino, R. Aigotti, V. Specchia, M. Maja (2000)
Electrochemical oxidation of organic pollutants at low electrolyte concentrationsElectrochimica Acta, 46
V. Singleton, R. Orthofer, R. Lamuela-Raventós (1999)
Analysis of total phenols and other oxidation substrates and antioxidants by means of Folin-Ciocalteu reagentMethods in Enzymology, 299
Yujie Feng, Xiao-yan Li (2003)
Electro-catalytic oxidation of phenol on several metal-oxide electrodes in aqueous solution.Water research, 37 10
A. Giannis, Michael Kalaitzakis, E. Diamadopoulos (2007)
Electrochemical treatment of olive mill wastewaterJournal of Chemical Technology & Biotechnology, 82
G. Vercesi, J. Rolewicz, C. Comninellis, J. Hinder (1991)
Characterization of DSA-type oxygen evolving electrodes. Choice of base metalThermochimica Acta, 176
C. Comninellis, C. Pulgarin (1991)
Anodic oxidation of phenol for waste water treatmentJournal of Applied Electrochemistry, 21
U. Un, Umit Altay, A. Koparal, U. Ogutveren (2008)
Complete treatment of olive mill wastewaters by electrooxidationChemical Engineering Journal, 139
The electrochemical oxidation of olive mill wastewater (OMW) over a Ti/RuO2 anode was studied by means of cyclic voltammetry and bulk electrolysis and compared with previous results over a Ti/IrO2 anode. Experiments were conducted at 300–1,220 mg L−1 initial chemical oxygen demand (COD) concentrations, 0.05–1.35 V versus SHE and 1.39–1.48 V versus SHE potential windows, 15–50 mA cm−2 current densities, 0–20 mM NaCl, Na2SO4, or FeCl3 concentrations, 80 °C temperature, and acidic conditions. Partial and total oxidation reactions occur with the overall rate being near first-order kinetics with respect to COD. Oxidation at 28 Ah L−1 and 50 mA cm−2 leads to quite high color and phenols removal (86 and 84%, respectively), elimination of ecotoxicity, and a satisfactory COD and total organic carbon reduction (52 and 38%, respectively). Similar performance can be achieved at the same charge (28 Ah L−1) using lower current densities (15 mA cm−2) but in the presence of various salts. For example, COD removal is less than 7% at 28 Ah L−1 in a salt-free sample, while addition of 20 mM NaCl results in 54% COD reduction. Decolorization of OMW using Ti/RuO2 anode seems to be independent of the presence of salts in contrast with Ti/IrO2 where addition of NaCl has a beneficial effect on decolorization.
Journal of Applied Electrochemistry – Springer Journals
Published: Dec 18, 2009
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.