Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

First tests of hybrid acoustic/archival tags on squid and cuttlefish

First tests of hybrid acoustic/archival tags on squid and cuttlefish This study demonstrates the simultaneous use of acoustic and archival tags for obtaining data for near-shore species. Australian giant cuttlefish Sepia apama (off Whyalla, South Australia) and the tropical squid Sepioteuthis lessoniana (off Magnetic Island, Queensland, Australia) were tagged using a ‘hybrid’ tag consisting of a Vemco V8 acoustic tag potted with a Vemco minilog temperature–depth archival tag. Four of these animals were released and monitored inside radio-acoustic-positioning-telemetry (RAPT) buoy-system arrays that included bottom-mounted sensors that transmitted independent temperature records and a reference standard for sound conductivity and position. All were subsequently located out of RAPT range and two of the four archival tags were recovered. Tags were located using a boat-mounted hydrophone and VR60 receiver and recovery was aided by a diver operating a hand-held VUR96 receiver. This technology provides a cost-effective alternative to expensive satellite pop-up tags and is suitable for much smaller species that return to near-shore environments. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Marine & Freshwater Research CSIRO Publishing

First tests of hybrid acoustic/archival tags on squid and cuttlefish

Loading next page...
 
/lp/csiro-publishing/first-tests-of-hybrid-acoustic-archival-tags-on-squid-and-cuttlefish-L0zkAG3d1r

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CSIRO Publishing
Copyright
CSIRO
ISSN
1323-1650
eISSN
1323-1650
DOI
10.1071/MF04248
Publisher site
See Article on Publisher Site

Abstract

This study demonstrates the simultaneous use of acoustic and archival tags for obtaining data for near-shore species. Australian giant cuttlefish Sepia apama (off Whyalla, South Australia) and the tropical squid Sepioteuthis lessoniana (off Magnetic Island, Queensland, Australia) were tagged using a ‘hybrid’ tag consisting of a Vemco V8 acoustic tag potted with a Vemco minilog temperature–depth archival tag. Four of these animals were released and monitored inside radio-acoustic-positioning-telemetry (RAPT) buoy-system arrays that included bottom-mounted sensors that transmitted independent temperature records and a reference standard for sound conductivity and position. All were subsequently located out of RAPT range and two of the four archival tags were recovered. Tags were located using a boat-mounted hydrophone and VR60 receiver and recovery was aided by a diver operating a hand-held VUR96 receiver. This technology provides a cost-effective alternative to expensive satellite pop-up tags and is suitable for much smaller species that return to near-shore environments.

Journal

Marine & Freshwater ResearchCSIRO Publishing

Published: Jun 27, 2005

Keywords: acoustic telemetry, archival tags, data loggers, RAPT.

References