Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging

Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using... AISI 1024 steel was severely deformed by using warm (500 °C) multiaxial forging (MAF) technique using up to nine forging passes in order obtain a composite ultrafine grained (UFG) microstructure consisting of fragmented cementite particles. Microstructural evolution is studied using optical and electron microscopy. After warm MAF, the hardness and strength properties improved significantly, although total elongation values decreased. The tribological properties of UFG low carbon steel produced by MAF have been investigated. Dry sliding was carried out using constant sliding speed. The wear test results showed that the strengthening of AISI 1024 steel by warm MAF processing did not lead to improvement of wear resistance. The results are explained on the basis of its microstructural features and lower pull-off work. Higher grain boundary density, presence of submicron-sized cementite particles, and lower pull-off work are found to be responsible for lower sliding wear resistance of UFG steel. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Materials Science Springer Journals

Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging

Padap, A.; Chaudhari, G.; Nath, S.
Journal of Materials Science , Volume 45 (17) – Apr 2, 2010
Download PDF
9 pages

Loading next page...
 
/lp/springer-journals/mechanical-and-dry-sliding-wear-behavior-of-ultrafine-grained-aisi-KtO0jWZpeL

References (17)

Publisher
Springer Journals
Copyright
Copyright © 2010 by Springer Science+Business Media, LLC
Subject
Materials Science; Materials Science, general; Characterization and Evaluation of Materials; Polymer Sciences; Continuum Mechanics and Mechanics of Materials; Crystallography and Scattering Methods; Classical Mechanics
ISSN
0022-2461
eISSN
1573-4803
DOI
10.1007/s10853-010-4430-7
Publisher site
See Article on Publisher Site

Abstract

AISI 1024 steel was severely deformed by using warm (500 °C) multiaxial forging (MAF) technique using up to nine forging passes in order obtain a composite ultrafine grained (UFG) microstructure consisting of fragmented cementite particles. Microstructural evolution is studied using optical and electron microscopy. After warm MAF, the hardness and strength properties improved significantly, although total elongation values decreased. The tribological properties of UFG low carbon steel produced by MAF have been investigated. Dry sliding was carried out using constant sliding speed. The wear test results showed that the strengthening of AISI 1024 steel by warm MAF processing did not lead to improvement of wear resistance. The results are explained on the basis of its microstructural features and lower pull-off work. Higher grain boundary density, presence of submicron-sized cementite particles, and lower pull-off work are found to be responsible for lower sliding wear resistance of UFG steel.

Journal

Journal of Materials Science – Springer Journals

Published: Apr 2, 2010

There are no references for this article.