Access the full text.
Sign up today, get DeepDyve free for 14 days.
(1985)
The Dispersion of Gases in Liquids with Turbines
(1994)
Particle – Liquid Mass Transfer in Mechanically Agitated Three Phase Reactors ”
(1990)
Estimation of Gas Hold up and Impeller Power in a Stirred Vessel Reactor”, in “Fluid Mixing III
Bakker (1994)
Gas-Liquid Contacting with Axial Flow ImpellersTrans. Inst. Chem. Eng., 72
(1959)
Physical Rate Process in Industrial Fermentation. Part II: Mass Transfer Coefficients in Gas–Liquid Contacting with and without Mechanical Agitation
K. Kushalkar, V. Pangarkar (1994)
Particle-liquid mass transfer in three-phase mechanically agitated contactorsIndustrial & Engineering Chemistry Research, 33
G. Hughmark (1980)
Power Requirements and Interfacial Area in Gas-Liquid Turbine Agitated SystemsIndustrial & Engineering Chemistry Process Design and Development, 19
V. Rewatkar, A. Deshpande, A. Pandit, J. Joshi (1993)
Gas hold-up behavior of mechanically agitated gas-liquid reactors using pitched blade downflow turbinesCanadian Journal of Chemical Engineering, 71
N. Datta, V. Pangarkar (1994)
PARTICLE-LIQUID MASS TRANSFER IN MULTIIMPELLER MECHANICALLY AGITATED CONTACTORSChemical Engineering Communications, 129
K. Chandrasekharan, P. Calderbank (1981)
Further observations on the scale-up of aerated mixing vesselsChemical Engineering Science, 36
M. Figueiredo, P. Calderbank (1979)
The scale-up of aerated mixing vessels for specified oxygen dissolution ratesChemical Engineering Science, 34
(1993)
Effect of Sparger Design on Gas Dispersion in Mechanically Agitated Gas / Lquid Reactors ”
(1991)
Gas Holdup in Stirred Vessels: Bubble Size and Power Input Effects
Oto Sitnal, D. McCarthy (1980)
Oxidative Rapid Pyrolysis of Coal in a Dilute Phase Transport ReactorIndustrial & Engineering Chemistry Process Design and Development, 19
S. Jadhav, V. Pangarkar (1991)
Particle-liquid mass transfer in mechanically agitated contactorsIndustrial & Engineering Chemistry Research, 30
(1990)
Estimation of Gas Hold up and Impeller Power in a Stirred Vessel Reactor
G. Hughmark (1974)
Hydrodynamics and mass transfer for suspended solid particles in a turbulent liquidAiche Journal, 20
A. Yawalkar, V. Pangarkar, A. Beenackers (2002)
Gas hold-up in stirred tank reactorsCanadian Journal of Chemical Engineering, 80
(1958)
Physical Rate Processes in Industrial Fermentation. Part I: The Interfacial Area in Gas–Liquid Contacting with Mechanical Agitation
(1988)
Gas–Liquid Oxygen Transfer and Scale-up. A Novel Experimental Technique with Results for Mass Transfer in Aerated Agitated Vessels
J. Walter, H. Blanch (1986)
Bubble break-up in gas—liquid bioreactors: Break-up in turbulent flowsChemical Engineering Journal, 32
K. Riet, J. Tramper (1991)
Basic Bioreactor Design
(1983)
Particle–Gas–Liquid Mixing in Stirred Vessels. Part II: Gas–Liquid Mixing
Yonggang Zhu, P. Bandopadhayay, Jie Wu (2001)
Measurement of gas-liquid mass transfer in an agitated vessel -A comparison between different impellersJournal of Chemical Engineering of Japan, 34
D. Miller (1974)
Scale‐up of agitated vessels gas‐liquid mass transferAiche Journal, 20
(1994)
Pangarkar, “Particle–Liquid Mass Transfer in Mechanically Agitated Three Phase Reactors
(1977)
Effect of Scale and Geometry on Flooding, Recirculation and Power in Gassed Stirred Vessels
(1993)
Scale up Correlations for Gas Hold up and Mass Transfer Coefficients in Stirred Tank Reactors
(1993)
Nienow, “Scale up Correlations for Gas Hold up and Mass Transfer Coefficients in Stirred Tank Reactors
V. Linek, V. Vacek, P. Benes (1987)
A critical review and experimental verification of the correct use of the dynamic method for the determination of oxygen transfer in aerated agitated vessels to water, electrolyte solutions and viscous liquidsChemical Engineering Journal, 34
V. Rewatkar, J. Joshi (1993)
Role of sparger design on gas dispersion in mechanically agitated gas-liquid contactorsCanadian Journal of Chemical Engineering, 71
(2002)
Pangarkar and A.A.C.M. Beenackers, “Gas Hold-up in Stirred Tank Reactors”, Can
(1994)
Pangarkar, “Particle–Liquid Mass Transfer in Multi-impeller Agitated Contactors
J. Smith (1992)
Simple Performance Correlations for Agitated Vessels
K. Riet (1979)
Review of Measuring Methods and Results in Nonviscous Gas-Liquid Mass Transfer in Stirred VesselsIndustrial & Engineering Chemistry Process Design and Development, 18
(1988)
Fluid Mechanics in Mechanically Agitated Contactors
(1988)
Particle – Liquid Mass Transfer in Multi - impeller Agitated Contactors ”
J. Hinze (1955)
Fundamentals of the hydrodynamic mechanism of splitting in dispersion processesAiche Journal, 1
A. Bakker, H. Akker (1994)
Gas-liquid contacting with axial flow impellersChemical Engineering Research & Design, 72
Scale - up of Agitated Gas – Liquid Reactors for Mass Transfer ”
Volumetric gas—liquid mass transfer coefficient (kLa) data available in the literature for larger tanks (T = 0.39 m to 2.7 m) have been analyzed on the basis of relative dispersion parameter, N/Ncd. It was observed that at a given superficial gas velocity (VG), kLa values were approximately the same irrespective of geometric configuration (size of the tank, type and size of the impellers, type of the sparger, etc.) at a particular N/Ncd. A single correlation based on N/Ncd is presented which shows satisfactory agreement with the kLa data of different workers.
The Canadian Journal of Chemical Engineering – Wiley
Published: Oct 1, 2002
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.