Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/wiley/fetal-biomodelling-9vzt041m0a
References (8)
-
Abbot Abbot, Netherway Netherway, Wingate Wingate, Abbot Abbot, David David (1994)
Craniofacial imaging, models and prosthesesAust J Otolaryng, 1
-
N. Stoker, N. Mankovich, D. Valentino (1992)
Stereolithographic models for surgical planning: preliminary report.Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons, 50 5
-
J. Bill, J. Reuther, Werner Dittmann, N. Kübler, J. Meier, H. Pistner, G. Wittenberg (1995)
Stereolithography in oral and maxillofacial operation planning.International journal of oral and maxillofacial surgery, 24 1 Pt 2
-
Klein Klein, Schneider Schneider, Alzen Alzen, Voy Voy, Gunther Gunther (1992)
Pediatric craniofacial surgery: comparison of milling and stereolithography for 3D model manufacturingPodiatr Radiol, 22
-
N. Mankovich, Andrew Cheeseman, N. Stoker (1990)
The display of three-dimensional anatomy with stereolithographic modelsJournal of Digital Imaging, 3
-
Y. Yau, J. Arvier, T. Barker (1995)
Technical note: maxillofacial biomodelling--preliminary result.The British journal of radiology, 68 809
-
Andrea Lee, Joshp Deutinger, G. Bernaschek (1995)
Three dimensional ultrasound: abnormalities of the fetal face in surface and volume rendering modeBJOG: An International Journal of Obstetrics & Gynaecology, 102
-
E. Merz, F. Bahlmann, G. Weber (1995)
Volume scanning in the evaluation of fetal malformations: a new dimension in prenatal diagnosisUltrasound in Obstetrics and Gynecology, 5
- Publisher
- Wiley
- Copyright
- Copyright © 1998 Wiley Subscription Services, Inc., A Wiley Company
- ISSN
- 0004-8666
- eISSN
- 1479-828X
- DOI
- 10.1111/j.1479-828X.1998.tb03003.x
- Publisher site
- See Article on Publisher Site
Abstract
Summary: A study has been performed to determine if a stereolithographic (SL) biomodel of a fetal face could be created from 3 dimensional (3D) ultrasound (US). 3D ultrasound images were acquired by Diasonics Gateway 2D Array ultrasound systems (Diasonics Ultrasound, San Jose, CA, USA) using an electromagnetic localizer (Tomtec Free Hand Scanning Device, Tomtec Imaging Systems, Middle Cove, Australia). 3D volumetric reconstruction of the fetal face was performed and the data was prepared to guide the construction of an exact solid biomodel by stereolithography (SLA 250 3D Systems, Valencia, CA, USA). A faithful solid representation of the fetal face was produced within 12 hours of the US scan. The fetal biomodel seemed to improve the display of the 3D data. The user‐friendly nature of biomodelling may have clinical utility for fetal morphological assessment and as an aid when counselling parents.
Journal
Australian and New Zealand Journal of Obstetrics and Gynaecology – Wiley
Published: May 1, 1998